• 제목/요약/키워드: V-돌기

검색결과 51건 처리시간 0.028초

가스절연개폐장치에 있어서 금속입자 존재시 임펄스전압에 대한 $SF_6$가스의 절연특성 (Dielectric Characteristics of Gaseous $SF_6$ for Impulse Voltages in Presence of a Metallic Particle in GIS)

  • 이복희;이경옥;이창준
    • 조명전기설비학회논문지
    • /
    • 제14권1호
    • /
    • pp.22-29
    • /
    • 2000
  • 본 논문은 가스절연개폐장치내에 바늘모양의 금속입자가 존재하는 경우 $\pm1.2/44[{\mu}s]$ 비진동성 임펄스와 $\pm0.4[{\mu}s]/1.14[MHz]$ 진동성 임펄스전압이 인가되었을 때 $SF_6$가스의 절연특성에 관한 것으로 절연파괴전압-시간 특성 (V-t 특성) 및 절연파괴전압-압력 특성(V-p 특성)을 측정하고 검토하였다. 실험은 길이 10[mml, 반경 0.5[mm]인 바늘모양의 돌기물에 의해 형성된 불평등 전계이며, 가스압력이 0.1~0.5[MPa]인 범위에서 수행하였다. 그 결과 절연 파괴는 정.부극성 모두 계단상 펄스에 의해 진전하는 리더메커니즘으로 발생하였다. 정극성의 진동성 임펼스전압이 인가되었을 때 절연파괴전압이 가장 낮았으며, 짧은 시간범위에서 V-t곡선의 감쇠가 현저하고 가스압력의 의존성이 적게 나타났다. 이에 반해 부극성의 경우 V-t 특성과 V-p 특성은 인가전압의 파형에 대한 의존성이 현저하였다.

  • PDF

고본(藁本)내 정유성분의 생리활성 탐색 (Screening of Biologically Active Essential Oils from Ligusticum tenuissimum)

  • 김민희;김영길;이진하;홍거표;홍정기;공영준;이현용
    • 한국미생물·생명공학회지
    • /
    • 제28권2호
    • /
    • pp.97-104
    • /
    • 2000
  • 고본에서 정유성분을 추출하여 표준물질과 함께 생리활성 실험을 하였으며, 전체적으로 고본에서 추출한 정유성분이 순수한 표준물질인 phthalic anhydride보다 생리활성능이 좋았다. 함암효과 및 돌연변이 유발 억제실험에서는 고본이 표준물질보다 약 60% 높은 억제 효과를 나타내었으며, 암세포 성장저해에서 고본의 정유성분은 1.0mg/ml의 농도에서 50%이상의 억제율을 보였으나, 표준물질은 40%이하의 낮은 억제율을 나타내었고, 정상세포에 대한 세포독성을 측정한 결과 고본의 정유와 표준물질이 1.0 mg/ml의 농도에서 각각 34.4%, 26.4%의 낮은 세포독성을 나타내었다. 또한 항돌연변이원성 실험에 rec-assay와 CHO V79 cell에서 고본의 정유가 표준물질 보다 더 효과적이었다. 그리고 면역기능 효과 실험에서 고본의 정유가 표준물질 보다 더 효과적이었다. 그리고 면역기능 효과 실험에서 고본의 정유성분은 표준물질보다 1.0mg/ml의 농도에서 1.21배의 증강을 보였다. 또한 고본 정유성분의 혈당강하, 혈압조절(ACE활성 저해), GST활성혈전용해능 등도 활성율이 뛰어났으며, 각각 최고의 농도에서(mg/ml) 59.2%, 80.1%, 301.2%, 42.9%의 우수한 생리활성능을 보였고, 표준물질인 경우 57.7%, 65.3%, 234.7%, 28.6%로 높지만, 고본의 정유성분 보다 상대적으로 낮은 활성능을 보였다. 그리고, 신경세포의 생육 및 신경돌기 생성촉진 실험에서 신경돌기 길이는 무첨가 보다 약 50$\mu\textrm{m}$ 촉진하였으며, 신경돌기를 지니는 세포수는 2배 더 증가하였고, 생세포수는 약 56.4% 증가함을 나타냈다. 따라서 고본의 정유성분의 생리 활성능과 신경세포에 대한 우수한 활성능은 식물기원의 신경 활성물질의 탐색이 유효할 것으로 사료되어 진다.

  • PDF

붕어(Carassius auratus) 장 내분비세포에 관한 면역조직화학적 연구 (An immunohistochemical study of endocrine cells in the gut of the Prussian carp, Carassius auratus)

  • 이형식;구세광;박기대;이재현
    • 대한수의학회지
    • /
    • 제41권4호
    • /
    • pp.477-484
    • /
    • 2001
  • 붕어 (Carassius auratus Linnaeus)의 장에 존재하는 소화관 내분비세포의 부위별 분포 및 출현빈도를 포유류의 peptide에 대한 10종류의 항혈청을 사용하여 면역조직화학적 방법으로 관찰하였다. 붕어의 장은 근위부에서부터 원위부까지 5 등분했으며 (Segments I~V), 대부분의 면역반응세포들은 상피부분의 상피세포들 사이 공간에서 관찰되었으며, 장 내강까지 신장되어 있는 긴 세포질돌기를 함유한 방추형의 개방형 세포 (open type cell)들이 주로 관찰되었으나, 세포질돌기 없이 원형 또는 타원형의 형태를 나타내는 폐쇄형 세포 (close type cell)들 역시 소수 관찰되었다. 본 실험에서는 somatostatin, cholecystokinin (CCK)-8 및 pancreatic polypeptide (PP) 면역반응세포들이 관찰되었으나, serotonin, glucagon, chromogranin A, secretin, vasoactive intestinal peptide (VIP), substance P 및 bombesin 면역반응세포들은 관찰되지 않았다. 한편 somatostatin 면역반응세포들은 장의 가장 근위부인 Segment I에 국한되어 극소수 관찰되었으며, CCK-8 면역반응세포들은 장의 근위부인 Segment I과 II에서 소수 또는 극소수의 빈도로 관찰되었다. PP 면역반응세포들 역시 장의 근위부에서 중간 부위인 Segment I에서부터 III에 걸쳐 중등도 또는 극소수의 빈도로 출현하였다. 이상에서 붕어 위 내분비세포들의 부위별 분포 및 출현 빈도는 다른 위가 없는 경골어류 (stomachless teleost)에서의 보고들과 유사하였으나, 독특한 분포를 나타내는 면역반응세포들 역시 관찰되었다.

  • PDF

별망둑 the gluttonous goby Chaenogobius gulosus 후각기관의 해부, 조직학적 특성 및 동소 망둑어과 출현종들과의 비교연구 (Microscopic Characteristics of the Olfactory Organ in the Gluttonous Goby Chaenogobius gulosus(Pisces, Gobiidae), Compared to Sympatric Intertidal Gobies)

  • 김현태;박종영
    • 한국어류학회지
    • /
    • 제33권1호
    • /
    • pp.1-7
    • /
    • 2021
  • 본 연구는 우리나라 서해의 모래와 암반 조간대에 서식하는 별망둑 Chaenogobius gulosus 후각기관의 해부 및 조직학적 구조를 확인하고 그 특징을 동소종(미끈망둑 Luciogobius guttatus, 날개망둑 Favonigobius gymnauchen)들과 비교하였다. 별망둑은 튜브형 전비공, 표면과 평행하는 후비공, 세로배열의 한 개 후판, 두 개 비낭, 후상피 하부에 풍부한 림프구, 호산구, 후감각뉴런에서 후돌기 직경의 1/4의 섬모 길이의 일반적 결과를 보여 주었다. 이러한 특징들 중 1) 0.5~1.0 mm의 전비공 직경, 0.2~0.5 mm의 후비공 직경(vs. 미끈망둑의 0.2~0.3 mm, 0.2~0.3 mm; 날개망둑의 0.2~0.4 mm, 0.1~0.3 mm의 전비공과 후비공 직경), 2) 감각상피에서의 상대적으로 풍부한 림프구, 3) 비감각섬모의 부재(vs. 미끈망둑에서 높은 분포; 날개망둑에서 낮은 분포), 4) 후감각뉴런의 후돌기 대비 1/4의 섬모 길이(vs. 미끈망둑의 1/4에서 1 : 1 비율 혼재; 날개망둑의 2~3배)는 두 동소종들과 비교되는 특이적인 결과였다. 결론적으로, 별망둑 후각기관의 해부 및 조직학적 특징들은 모래와 암반 조간대에서 다른 동소종들 보다 더 적극적인 면역반응과 활동적인 움직임에 적응된 결과로 간주된다.

비모수적 기대최대치(NPEM)연산방법에 의한 미국인과 재미동포 충수돌기염 환자에게 겐타마이신의 모집단 약물동태학 (Population Pharmacokinetics for Gentamicin in American and Korean-American Appendicitis Patients Using Nonparametric Expected Maximum(NPEM) Algorithm)

  • 범진필;최준식
    • 약학회지
    • /
    • 제39권2호
    • /
    • pp.103-112
    • /
    • 1995
  • Population pharmacokinetics for gentamicin were compared with 24 American patients (16 male and 8 female) and 16 Korean-American appendicitis patients(12 male and 4 female). Two to six blood specimens were collected from all patients at the following times: just before a regularly scheduled infusion and at 1/2 hour after the end of a 1/2 hour infusion. Nonparametric expected maximum(NPEM) algorithm for population modeling was used. The estimated parameters were the elimination rate constant(K), the slope of the relationship between K versus creatinine clearance(KS), the apparent volume of distribution(V), the slope of the relationship between V versus weight(VS), gentamicin clearance(CL) and the slope of the relationship between CL versus creatinine clearance and the VS(CS). The output includes a 3-dimensional plot of the joint probability density function(PDF), two marginal PDF, means, medians, modes, variance, skewness, kurtosis, and CV%. The mean K(KS) were 0.424$\pm$0.139(0.00429$\pm$0.00164) and 0.411$\pm$0.135 hr$^{-1}$ (0.00475$\pm$0.00180[hr.mL/min/1.73m$^{2}]^{-1}$) for American and Korean-American populations, respectively. The mean V(VS) were not different at 15.6$\pm$4.77(0.233$\pm$0.0526) and 15.1$\pm$3.84L(0.239$\pm$0.0492 L/kg) for American and Korean-American populations, respectively (P>0.2). The mean CL (CS) were 6.28$\pm$1.85(0.0634$\pm$0.0191) and 5.70$\pm$1.77 L/hr(0.0701$\pm$0.0215 L/kg[hr.mL/min/1.73m$^{2}$)] for American and Korean-American populations, respectively. There are no differences in gentamicin pharmacokinetics between American and Korean-American Appendicitis patients.

  • PDF

AFM을 이용한 $LiPF_6$를 주성분으로 하는 비수용액중에서의 흑연 음극 표면에 형성되는 피막에 관한 연구 (AFM Study on Surface Film Formation on a Graphite Negative Electrode in a $LiPF_6$-based Non-Aqueous Solution)

  • 정순기
    • 한국산학기술학회논문지
    • /
    • 제7권6호
    • /
    • pp.1313-1318
    • /
    • 2006
  • 흑연 음극 표면상에 형성되는 필름의 생성 기구를 규명하기 위하여, 1 몰의 $LiPF_6$가 함유된 탄산에틸렌과 탄산디에칠의 혼합 용액 중에서 고배향성 열분해 흑연을 0.5 mV $s^{-1}$ 의 느린 속도로 전위주사하면서 원자력간 현미경을 이용하여 전극표면을 in-situ 관찰하였다. 전해질 용액의 분해반응은 전극의 스텝 모서리 상에서 우선적으로 진행되었으며, 전극 전위 2.15 V (vs. $Li^+$/Li) 에서 시작되었다. 0.95-0.8 V (vs. $Li^+$/Li) 의 전위 영역에서 전극 표면의 특정 부분이 평탄하게 부풀어오르는 현상과, 타원형의 돌기 구조가 관찰되었다. 이러한 형상 변화에 있어서 전자는 용매화된 리튬 이온이 흑연 층간에 삽입되며 나타나는 구조 변화이며, 후자는 삽입된 용매화 리튬이 환원 분해되어 생성된 것으로 추정된다. 0.8 V (vs. $Li^+$/Li) 보다 음의 전위 영역에서는 입자상의 침전물이 전극 표면에 형성되었다. 1 사이클 후, 측정된 침전층의 두께는 30 nm 이었다. 이러한 침전물은 리튬염($LiPF_6$)과 용매 분자(EC 및 DEC)들이 분해되어 생성된 것이며, 전극 표면에서 계속적으로 전해질 용액이 분해되는 반응을 억제하는 중요한 역할을 하고 있는 것으로 생각된다.

  • PDF

韓國産 捕食線蟲(Mononchida: Nematoda)의 4 新種 기재 (Descriptions of Four New Species of Predatory Nematodes (Mononchida) From Korea)

  • 최영연;;이성민
    • 한국토양동물학회지
    • /
    • 제4권2호
    • /
    • pp.89-100
    • /
    • 1999
  • 捕食線蟲目 (Mononchida)의 4신종을 기재하였다; Iotonchus obtusus sp. n.는 체장이 2.8 mm, a=33, b=4.2, c=61, V=68, 口腔은 61${\times}$45 ${\mu}$m이고, 背部齒는 基部에 있고, 陰門突起가 있으며, 꼬리는 짧고 반원형이며 末端部의 표피는 두꺼운 것이 특징이다. Miconchus valvapapillatum sp. n.는 體長이 2.7-3.6 mm, a=29-36, b=4.1-4.5, c=18.4-21, V=65-69, 口腔은 53-61${\times}$29-33 ${\mu}$m, 交接刺는 132-137 ${\mu}$m, 復中央補助突起는 28-31개이며, 陰門 前後方에 5-8개의 연속적인 돌기를 가지며, 3쌍의 陰門腺이 있다. Clarkus koreanus sp. n.는 體長이 1.1-1.3 mm, a=27.5-28.8, b=3.5-3.9, c=12-14.5, V=60-64, 口腔은 24-28${\times}$13.5-15 ${\mu}$m이고, 口脣部는 잘 區劃졌고, 雙器는 背部齒에 대해서 후방에 있으며, 陰脣을 가진다. Coomansus ulsani sp. n.는 體長이 1.2-1.5 mm이고, a=23.5-26, b=3.4-3.8, c=13.6-14.8, V=65-68, 口腔은 36-39${\times}$21-23 ${\mu}$m이고, 口脣部는 잘 區劃졌고 口腔壁은 1줄의 가는 세로 隆起部가 있다.

  • PDF

간이 파인 블랭킹 금형의 개발을 통한 범용 유압 프레스에서의 원형 정밀진단 가공성 연구 (Development of Fine Blanking Die with Fluid Chamber and its Application to Procuction of Circular Blanks in a Hydraulic Press)

  • Kim, J.H.;Ryu, J.G.;Chung, W.J.
    • 한국정밀공학회지
    • /
    • 제13권5호
    • /
    • pp.157-163
    • /
    • 1996
  • This paper is concered on the development of low-cost fine blanking die with two fluid chambers of which the pressure can be controlled by a hydraulic unit and its application to producting circular blanks in a conventional hydraulic press, not in a special triple-action press usually adopte in fine blanking operation. Four important working parameters affecting on the precision accuracy of products such as existence and position of Vee-ring, stripping force and counter punching force are primarily considered for experiments. Finite element analysis by suing ABAQUA software is approxi- mately made for blanking of circular specimen with a flat stripper plate and then compared with experimental measurements. The the theoretical prediction of camber height which represents deflection of a dish-shaped specimen after blanking seems to give a qualitatively good agreement. It is shown through experiments the the camber height decreases with decreasing stripping force and also with increasing counter punching force, but particularly depending on the latter much more than the former.

  • PDF

백금 촉매가 증착된 미소돌기 전극과 유한 연료를 가지는 극소형 직접메탄을 연료전지의 제작 및 성능 평가 (Fabrication and Test of Micro Direct Methanol Fuels using Platinum Sputtered Microcolumn Electrodes with a Limited Fuel Source)

  • 서영호;조영호
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제53권4호
    • /
    • pp.218-224
    • /
    • 2004
  • We present a miniature Direct Methanol Fuel Cell (micro-DMFC) using platinum sputtered microcolumn electrodes with a limited amount of fuel. We use the microcolumn electrode in order to improve the power density of the micro-DMFC that consists of two electrodes and polymer electrolyte. We also design the built-in fuel chamber in the anode for the portable electronics applications. We design and fabricate both microcolumn and planar electrodes, having an identical projective area of 5mm${\times}$5mm. The diffusion current density of the microcolumn electrode is 1.73 times higher than that of the planar electrode at electrode potential of 1.1V in the half-cell test. The micro-DMFC based on the microcolumn electrodes shows the maximum power of 10.8$\pm$7.54㎼(43.23$\pm$0.16㎼/$\textrm{cm}^2$) at the projective area of 5mm${\times}$5mm, while the planar electrode micro-DMFC shows the maximum power of 0.81$\pm$0.42㎼(3.24$\pm$1.68㎼/$\textrm{cm}^2$) at the same projective area. The micro-DMFC based on the microcolumn electrodes shows 13 times higher power density that the micro-DMFC based on the planar electrodes does.

Long 전극갭을 가지는 AC PDP의 전기광학적 특성에 미치는 돌기전극의 영향 (Effect of Protrusion Electrode of the Electro-Optical Characteristics of AC PDP with Long Electrode Gap)

  • 허정은;옥정우;이돈규;이해준;이호준;박정후
    • 전기학회논문지
    • /
    • 제57권8호
    • /
    • pp.1422-1428
    • /
    • 2008
  • In the current PDP technology, one of the most important issues in AC PDP is improvement of luminance and luminous efficacy. To improve luminance and luminous efficacy, new cell structure of PDP containing long discharge path is necessary. However, it causes an increment of firing voltage. In order to decrease firing voltage of AC PDP having long discharge gap, the protrusion electrode is proposed. To drop the firing voltage, the protrusion electrode is inserted into the forward area of the main discharge gap. This paper presents measurements of detailed optical and electrical characteristics of AC PDP with protrusion electrodes. The experimental results show that the proposed structure with gap 80um has lower firing voltage to 27V than that of the conventional long gap structure. Moreover, the ICCD(Intensified Charge Coupled Device) images of the proposed structure show quick discharge generation by 0.07usec and longer continuation by 0.05usec than that of the conventional long gap structure. Therefore, the proposed protrusion electrodes have higher luminance by 12.5% than that of the conventional structure, as having no decrement of Luminous efficacy.