• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.527-532
• /
• 2004

An effective balancing method for mil compressors is developed based on vibration plane model. By assuming the design range of balancer size is not large and considering only the radial axial direction rigid vibration of the mil compressors, we can find the vibration plane (V-plane) describing the vibration level of the scroll compressor depending upon balancer design specifications. By in the intersection of two minimum lines (areas) obtained from the couple of V-Planes we can find the design lesion to minimize vibration level of the compressor. The full design process is described by using an illustrative example with upper and lower balancer weights. Further more sensitivity analysis of parameters important for designation of size and positioning of the balancer is analyzed.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.249-255
• /
• 2008

This paper developed the computerizing assessment system modeling of the natural gas and district heating DSM programs. It constructed as each project in accordance with the business investment plans & assessment DB, related M&V data DB and cost-effectiveness analysis data DB. It is composed of total 58 tables which are 22 tables which are used in the plan and the assessment, 16 tables which are used in the cost-effectiveness analysis, 18 tables which are used in the M&V, table which is used in qualitative evaluation, as by each programs. This computer programs can contributed to DSM business investment system construction as implementing for algorithm development and an estimation by each programs.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.215-222
• /
• 2007

Coating of Hot-dip galvannealed steel consists of various Fe-Zn intermetallic compounds. Since the coating is hard and there for is very brittle, the surface of steel sheet is easy to be ruptured during second manufacturing processing. This is called as powdering. In addition, forming equipment might be polluted with debris by powdering. Therefore, various research have been carried out to prohibit powdering fur improving the quality of GA steel. This paper carried out finite element analysis combined with damage model which simulate the failure of local layer of hot-dip galvannealed steel surface during v-bending test. Since the mechanical property of intermetallic compound was unknown exactly, we used the properties calculated from measurements. The specimen was divided into substrate, coating layer and interface layer. Local failure at coating layer or interface layer was simulated when elemental strain reached a prescribed strain.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.241-241
• /
• 1999

본 연구는 상대론적 전자빔(300kV, 20KA, 60ns)과 펄스플라즈마의 발생 및 전파특성에 관한 것으로 세부 내용은 다음과 같다. Sub-Torr로 유지되는 다이오드에서 상대론적 전자빔의 발생이 이루어질 때 전자빔의 펄스너비 및 전류 상승시간을 다이오드 압력을 변인으로 하여 연구하였다. 펄스너비와 압력과의 관계식을 실험적으로 유도하였으며 다이오드 내에서 전자빔과 중성기체와의 충돌에 의한 기체이온화 모델로 설명하였다. 또한 Sub-Torr 도파관에서 상대론적 전자빔의 수송 특성을 연구하였으며 전자빔의 propagation window와 고압에서의 수송효율의 저하 원인을 밝혔다. 그리고 이 영역에서 매우 짧은 펄스 플라즈마의 형태로 형성되는 빔 유도 플라즈마채널의 이온밀도 및 conductivity를 진단하는 새로운 실험적 방법을 확립하였다. 한편 빔 수송효율 증대를 위한 한 방법으로 진공영역에서 지역화된 중성기체를 빔 선두부분에 위치시켜 지역적인 공간전하 중성화를 꾀하는 기법도 시험되었다. 마지막으로 중 출력(1kV, 10kA, 1ms) 규모의 자기플라즈마 동력학 장치를 제작하여 펄스 플라즈마를 발생시키고 그 특성을 조사하였다. 제작된 자기플라즈마 동력학 장치는 현재 기초과학 지원 연구소의 "한빛" 장치에 부착되어 초기 플라즈마 발생용으로 활용되고 있다.로 활용되고 있다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.5
• /
• pp.676-682
• /
• 2012

To review application of HVDC (High Voltage Direct Current) transmission line to HVAC T/L in operation, reduced-scale model was designed and manufactured. The arms of model were designed to change height and interval of conductors. Electrical environmental interferences were estimated by various configuration of AC 345kV and DC 250kV T/L. The interferences such as electric field intensity and ion current density were measured and converted reduced-scale factor to full-scaled. Additionally, effects between AC and DC T/L were studied.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.9
• /
• pp.1728-1734
• /
• 2009

This paper proposes a new power conditioning system for the fuel cell power generation, which consists of a ZVS DC-DC converter and 3-phase inverter. The ZVS DC-DC converter with a digital controller boosts the fuel cell voltage of 26-50V up to 400V, and the grid-tie inverter controls the active power delivered to the grid. The operation of proposed power conditioning system was verified through simulations with PSCAD/EMTDC software. The feasibility of hardware implementation was verified through experimental works with a laboratory prototype, which was built with 1.2kW PEM fuel-cell stack, 1kW DC-DC converter, and 3kW PWM inverter. The proposed system can be utilized to commercialize an interconnection system for the fuel-cell power generation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.1
• /
• pp.20-25
• /
• 1998

This paper presents an algorithm for contingency ranking using line outage distribution factors(LODF) which are established by generation shift distribution factors(GSDF) from DC load flow solutions. By using the LODF, the line flow can be calculated according to the modification of base load flow if the contingency occur. To obtain faster contingency ranking, only the loading line more than 35[%](60[%] at 154[kV]) is included in the computation of Performance Index(PI). The proposed algorithm has been validated in tests on a 6-bus test system.system.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10b
• /
• pp.260-262
• /
• 2000

MPEG-4에서는 다양한 객체를 취급하기 위하여 시스템 부분(Part1)이 차지하는 비중이 MPEG-1이나 MPEG-2에서 보다 훨씬 높아졌다. 이러한 MPEG-4의 시스템 부분을 구현한 참조 모델을 IM1이라고 한다. IM1에는 다양한 오디오/비디오(A/V) 객체를 수용하기 위하여 디코더 프레임워크를 마련하고, 어떤 A/V 객체든 이 프레임워크에 맞추어 디코더를 구현하면 IM1 프리젠터에서 플레이가 가능토록 하고 있다. 현재 IM1 버전 3.8에서는 H.263 비디오, G.723 오디오, JPEG 이미지, AAC 오디오를 지원하고 있다. 이 논문에서는 MPEG-4 비디오 디코더를 IM1 디코더 프레임워크를 맞추어 설계, 수정한 내용을 기술하였다.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1522-1524
• /
• 2004

The wind turbine captures the wind's kinetic energy in a rotor consisting of two or more blades mechanically coupled to an electrical generator. In this paper is proposed models for wind energy power plants using V.A.W.T. and complex concepts using shapes of a half cylinder for blades. A familiar configuration for a drag-type wind machine is shown this paper. In this simple machine, kinetic energy in the wind is converted into mechanical energy in a vertical rotating shaft.

• Journal of Surface Science and Engineering
• /
• v.43 no.3
• /
• pp.154-158
• /
• 2010

Numerical analysis is done to investigate the effects of pulse bias on the plasma processing characteristics like ion doping and ion nitriding by using fluid dynamic code with a 2D axi-symmetric model. For 10 mTorr of Ar plasma, -1 kV of pulse bias was simulated. Maximum sheath thickness was around 20 mm based on the electric potential profile. The peak electron temperature was about 20 eV, but did not affect the averaged plasma characteristics of the whole chamber. Maximum ion current density incident on the substrate was 200 $A/m^2$ at the center, but was decreased down to 1/10th at radius 100 mm, giving poor radial uniformity.