• Journal of Korean Neurosurgical Society
• /
• 제41권3호
• /
• pp.161-165
• /
• 2007

Objective : Percutaneous approach to the middle thoracic vertebra through the transpedicular route for the patients with osteoporotic vertebral compression fractures is difficult due to the small size of the pedicle and parasagittally oriented vertebra body anatomy. The percutaneous vertebral body access [PVBA] technique utilizing the posterolateral extrapedicular approach avoids the pedicle and provides direct access to the vertebral body. The objective of this study is to evaluate the efficacy of the vertebroplasty utilizing PVBA technique for osteoporotic vertebral compression fractures in the middle thoracic vertebrae. Methods : A retrospective review was done on 20 patients who underwent vertebroplasty utilizing PVBA technique performed for painful osteoporotic compression fracture in the middle thoracic vertebrae at 22 levels from May 2003 to June 2006. The average amount of the injected cement was 1.5-2.5ml. The postprocedural outcome was assessed using a visual analogue scale [VAS]. Results : The treated vertebrae were T5 [1 level], T6 [5 levels], 17 [7 levels], and T8 [9 levels]. The compression rate and kyphotic angle were improved after procedure from $18%{\pm}13.4$ to $16%{\pm}13.8$ [p > 0.05] and from $6.9^{\circ}{\pm}6.7$ to $6.6^{\circ}{\pm}6.2$ [p>005], respectively. Preprocedural VAS was $8.2{\pm}0.70$ and was decreased to $2.1{\pm}1.02$ [p < 0.01] after treatment. Postprocedural cement leakage was noted in 3 levels [13.7%]. There were no cases of leakage to epidural space or neural foramen, segmental artery injury, and pneumothorax. Conclusion : These results suggest that the complication rates are low and good results can be achieved with vertebroplasty utilizing PVBA technique for the osteoporotic vertebral compression fractures especially in the middle thoracic vertebrae.

• Journal of Power Electronics
• /
• 제11권5호
• /
• pp.688-696
• /
• 2011

This paper proposes a simple space vector PWM (SVPWM) scheme including overmodulation operation for 3-level NPC (Neutral Point Clamped) Inverters. The proposed scheme features a simple decision and calculation procedure for determining switching times in the overmodulation range by utilizing the duty calculation method used in 2-level inverters and the minimum phase error projection method widely employed in motor drive systems. The proposed scheme does not need to detect the angle of the reference vector or calculate trigonometric functions to determine the magnitude of the voltage vector. The magnitude of the angle of the new reference voltage vector is decided in advance with the help of the Fourier Series Expansion to extend the linearity of the output voltage of 3-level inverters in the overmodulation region. Experimental results demonstrate the validity of the proposed SVPWM scheme including overmodulation operation for 3-level NPC inverters.

• Journal of Astronomy and Space Sciences
• /
• 제19권3호
• /
• pp.225-230
• /
• 2002

Synthetic Aperture Radar (SAR) has been used for mapping the surface geomorphology of cloudy planets like Venus as well as the Earth. The cloud-free Mars is also going to be scanned by SAR in order to detect buried water channels and other features under the very shallow subsurface af the ground. According to the 'Mid and Long-term National Space Development Plan' of Korea, SAR satellites, in addition to the EO (Electro-Optical) satellites, are supposed to be developed in the frame of the KOMPSAT (Korean Multi-Purpose Satellite) program. Feasibility of utilizing a SAR payload on KOMPSAT platform has been studied by KARI in collaboration with Astrium U.K. The purpose of the ShR program is Scientific and Civil applications on the Earth. The study showed that KOMPSAT-2 platform can accommodate a small SAR like Astrium’s MicroSAR. In this paper, system aspects of the satellite design are presented, such as mission scenario, operation concept, and capabilities. The spacecraft design is also discussed and conclusion is followed.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.236-239
• /
• 2008

Korea Aerospace Research Institute (KARI) has been trying for utilizing the polar station in Svalbard, Norway to receive the KOMPSAT-2 images, which are distributed and applied directly for Europe Space Agency (ESA) users. Now, KARI is operating the SpaceCapture-2 system that provides the KOMPSAT-2 catalogue service via the internet, whereas ESA is operating the EOLI-SA tool that provides access to the online ESA catalogues of Earth Observation (EO) products. This paper describes external interface based on service-oriented architecture in order to provide the KOMPSAT-2 catalogue service from the SpaceCapture-2 system to the EOLI-SA tool. As the KOMPSAT-2 catalogue service is available in the EOLI-SA tool through an implementation of external interface, the extend use of KOMPSAT-2 imageries is expected.

• ETRI Journal
• /
• 제35권1호
• /
• pp.100-108
• /
• 2013

In this paper, a feature extraction (FE) method is proposed that is comparable to the traditional FE methods used in automatic speech recognition systems. Unlike the conventional spectral-based FE methods, the proposed method evaluates the similarities between an embedded speech signal and a set of predefined speech attractor models in the reconstructed phase space (RPS) domain. In the first step, a set of Gaussian mixture models is trained to represent the speech attractors in the RPS. Next, for a new input speech frame, a posterior-probability-based feature vector is evaluated, which represents the similarity between the embedded frame and the learned speech attractors. We conduct experiments for a speech recognition task utilizing a toolkit based on hidden Markov models, over FARSDAT, a well-known Persian speech corpus. Through the proposed FE method, we gain 3.11% absolute phoneme error rate improvement in comparison to the baseline system, which exploits the mel-frequency cepstral coefficient FE method.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2005년도 춘계학술발표대회 논문집
• /
• pp.55-59
• /
• 2005

The purpose of this study is to make an in-between space considered as an abandoned thing to the central place of commercial area by utilizing it to form the each places' identities. The methodology of the design is not about one complete form but about a continuous process by negotiation. This process is proceeded by holding council between public institution and private owners of the buildings and applied the rules to various cases in similar places in the commercial area. This project has been developed in order to construct a healthy network to connect buildings nearby and programs in a block. This place could provide the ground for public communication between any group to visit this place and make the spatial milieu of the city.

• 한국주거학회논문집
• /
• 제20권5호
• /
• pp.85-92
• /
• 2009

In the coming 21st centuries, words of development of information communication technology among the key words being emerged as an important concern have been talked about frequently and ubiquitous environment that helps human living being networked with humans, objects and environments has been rapidly progressed, influencing significantly over the various fields as well as architectural area. And eventually in this architectural area, the space that is desired to be shown to and experienced by the people could be found in the creation of a space in a new form that has not been existed in this world by utilizing the information communication technology. The future housing delicately add using technology and AR system which is an essential element. The purpose of this study is to production and using each element and develop one-step advanced the hybrid system space. We have to select the best way of the construction future housing.

• International Journal of Aeronautical and Space Sciences
• /
• 제1권2호
• /
• pp.50-67
• /
• 2000

The spacecraft simulator is used for command validation, operational check of the Satellite Operation Subsystem (SOS), spacecraft anomaly analysis support, satellite operator training etc. In this paper, S/W design features and modeling characteristics of the KOMPSAT Spacecraft Simulator Subsystem (SIM) are described. Validation procedures and simulation results are also provided. The SIM provides extensive simulation capabilities by including models for most of the spacecraft subsystems. The software structure of the SIM was designed and implemented so as to support operations not only in real-time but also in non real-time by utilizing the Hewlett Packard (HP) UNIX functions. The SIM incorporates as many user-friendly Man Machine Interface (MMI) windows as possible so that all the SIM normal operations can be executed through the MMI windows.

• International Journal of Aeronautical and Space Sciences
• /
• 제7권1호
• /
• pp.73-83
• /
• 2006

In this paper, a redundancy management system for aircraft is studied, and fault detection and isolation algorithms of inertial sensor system are proposed. Contrary to the conventional aircraft systems, UAV system cannot allow triple or quadruple hardware redundancy due to the limitations on space and weight. In the UAV system with dual sensors, it is very difficult to identify the faulty sensor. Also, conventional fault detection and isolation (FDI) method cannot isolate multiple faults in a triple redundancy system. In this paper, two FDI techniques are proposed. First, hardware based FDI technique is proposed, which combines a parity equation approach with a wavelet based technique. Second, analytic FDI technique based on the Kalman filter is proposed, which is a model-based FDI method utilizing the threshold value and the confirmation time. To provide the reference value for detecting the fault, residuals are calculated using the extended Kalman filter. To verify the effectiveness of the proposed FDI methods, numerical simulations are performed.

• Journal of information and communication convergence engineering
• /
• 제3권1호
• /
• pp.49-55
• /
• 2005

This study is to suggest a visualization technique to display the relations of associated data in an optimal way when trying to display the whole data on a limited space by dealing with a large amount of data with linked information. For example, if you track an IP address through several steps and display the data on a screen, or if you visualize the human gene information on a 3-dimensional space, then it becomes even easier to understand the data flow in such cases. In order to simulate the technique given in this study, the given algorithm was applied to a large number of nodes made in a random fashion to optimize the data and we visually observed the result. According to the result, the technique given in this study is more efficient than any previous method in terms of visualization and utilizing space and allows to more easily understand the whole structure of a node because it consists of sub-groups.