• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.188-192
• /
• 2006

This study is conducted to improve efficiency of thermal storage tank. The thermal storage tank was designed to store heat energy that obtained from solar or the others heat sources. However, it has difficulties in storing heat with uniform temperature through the entire tank with respect to vertical direction. This kind of maldistribution of the supplied heat to the storage tank effects on the system performance. In this study is focused on utilization of the thermal stratification to improve thermal comfort for people in the house. To enhance temperature stratification of the tank, a distributor was designed and Installed in the middle of the tank. The distributor is supplies hottest water to the top side of the tank which is very close to inlet of the supply line to the heating load. The hottest water that is accumulated on top side of the tank is firstly supplied to the load with higher temperature. Reminder water takes a little time to warming up until desired supply temperature reached. This kind alternating selection of the supply temperature is improve thermal comfort with moderated system performance.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.1
• /
• pp.22-28
• /
• 2018

In case of developing a combined system by a number of distributed resources with storage device, a number of application suggests a huge capacity can derive operational flexibility both power supply issues or when unexpected situation imposed. However, it is important to determine a resonable energy capacity because the device have many controversial cost issues in current power system industry. An ESS application which focusing essentially required points can induce appropriate storage capacity that required in economic operation. In this paper, a curtailment supporting algorithm based on storage device is introduced, and applied in the capacity calculation method. The main algorithm pursues handling minor exceeding quantities which can cause mechanical load at blade; This paper tries to include it for configuring hybrid algorithm with pitch control. Several fluctuating conditions are utilized in simulation to reflect critical situation. The analyzing process focuses on the control feasibility with applied capacity and control method.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.2
• /
• pp.133-142
• /
• 2009

Recently, with the advance of wireless internet and the frequent use of mobile devices, demand for LBS(Location Based Service) is increasing, and research is required on spatial indexes for the storage and maintenance of spatial data to provide efficient LBS in mobile device environments. In addition, the use of flash memory as an auxiliary storage device is increasing in order to store large spatial data in a mobile terminal with small storage space. However, the application of existing spatial indexes to flash-memory lowers index performance due to the frequent updates of nodes. To solve this problem, research is being conducted on flash-memory based spatial indexes, but the efficiency of such spatial indexes is lowered by low utilization of buffer and flash-memory space. Accordingly, in order to solve problems in existing flash-memory based spatial indexes, this paper proposed FR-Tree (Flash-Memory based R-Tree) that uses the node compression technique and the delayed write operation technique. The node compression technique of FR-Tree increased the utilization of flash-memory space by compressing MBR(Minimum Bounding Rectangle) of spatial data using relative coordinates and MBR size. And, the delayed write operation technique reduced the number of write operations in flash memory by storing spatial data in the buffer temporarily and reflecting them in flash memory at once instead of reflecting the insert, update and delete of spatial data in flash-memory for each operation. Especially, the utilization of buffer space was enhanced by preventing the redundant storage of the same spatial data in the buffer. Finally, we perform ed various performance evaluations and proved the superiority of FR-Tree to the existing spatial indexes.

• Journal of Information Technology Services
• /
• v.15 no.3
• /
• pp.97-114
• /
• 2016

One of the key success factors for the intelligent IT service which is characterized by personalization and automation, is to obtain relevant data from either sensors or data storage for reasoning, analyzing and forecasting. The availability of the open data sources such as public portal sites remarkably increases the efficiency and quality of the intelligent IT service. However, with the condition that not all data in the existing public or private sites are opened or have various types of openness, it prohibits the value of utilization. For these reasons, it is highly required to evaluate the extent of openness of data storage. However, there are only a few studies which explore the factors which affect the degree of data openness with respect to intelligent IT services. Hence, this study aims to propose an evaluation model including the indices to evaluate a process of opening data for the intelligent IT service from a viewpoint of data utilization process. The indices are applied to evaluate the actual multinational websites, which provide public data for verification. We also discuss the implications of the evaluation according to the results.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.2
• /
• pp.137-142
• /
• 2021

A Photovoltaic power streetlight is a system that uses solar energy to charge a secondary battery and then uses it for night lighting through a lamp, and can be configured as a standalone or grid-connected type by installing an LED streetlight at the load end. The energy generated through the solar cell module can be charged to the secondary battery through the charge/discharge control device, and then the LED street light can be turned on and off by comparing the power generation voltage and the charging voltage according to the monitoring of solar radiation, or by setting a specific time after sunset or sunrise. Based on these contents, this paper designed and manufactured a simulated solar power streetlight for education using new and renewable energy utilization and storage functions. Using these educational equipment, students can 1) understand the flow of energy change using renewable energy including sunlight as electric energy, 2) understand new and renewable energy, and cultivate basic design and manufacturing application power of related products, 3) The use of new and renewable energy through power conversion and strengthening of practical training and analysis through hardware production can be instilled.

• Journal of the Korean Institute of Rural Architecture
• /
• v.17 no.4
• /
• pp.67-74
• /
• 2015

Due to an inability to accommodate for the rapidly increasing number of printed materials, Korean academic libraries are facing serious space shortage problems. Very few academic institutions have the funds to expand existing libraries or construct new facilities in order to accommodate the influx of printed materials. Despite not having the luxury to create new space, many establishments continue to implement the open access system. Seeing that such a system is only user friendly when used in a spacious facility, the maintenance of the open access system is unreasonable. Only few libraries consider the space efficient closed access system which helps to resolve storage space shortage. In the current state of the problem, improving the efficiency to which books are stored in existing storage areas within a library facility is the only appropriate solution. Enacting methods to improve physical space utilization within a fixed volume library facility will undoubtedly diminish the space shortage issue at hand. In this article, several space efficiency improvement approaches are discussed. Methods of book storage plan re-layout (floor, plan, ceiling, height, bookshelf design), book arrangement possibilities, and the reduction of the physical volume of reserved materials are each examined.

• Food Science of Animal Resources
• /
• v.33 no.1
• /
• pp.109-118
• /
• 2013

The objective of this study is to increase the utilization of duck by-products. The nutritional characteristics of four kinds of duck by-products (liver, heart, gizzard, and feet) were determined. The quality changes of four kinds of duck by-products were evaluated during frozen storage at $-20^{\circ}C$. The crude protein and cholesterol contents showed the highest level in liver while the crude fat content was determined to be the highest content in feet at 13.90%, and lowest in gizzard at 0.57%. Duck by-products contained USFA in the range of 48.69-77.66%, and the highest level in feet (p<0.05). During storage of duck by-products at $-20^{\circ}C$, the pH of duck by-products was in the range of 6.24-7.15, and there were no significant differences during the 4 mon storage period at $-20^{\circ}C$. Microbial counts of duck by-products except the gizzard were decreased significantly as storage time elapsed. In the sensory evaluation, overall acceptability of by-products (liver, heart, gizzard and feet) showed a tendency of decreasing value through storage, because off-flavor was increased with increased storage. Considering the combined results, one can conclude that duck by-products provide a good source of protein, and it was judged that the use of raw meat would be most appropriate within 3 mon of frozen storage.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.28 no.2
• /
• pp.31-38
• /
• 2022

Purpose: This study presents the results of the analysis on space utilization of kidney dialysis units in regional public hospitals, which plays a key role in local public medical services. The result aims to achieve safety from infection, allow comfort for the dialysis environment, and stability for medical support. The purpose of this study is to present fundamental data for architectural plans for the kidney dialysis unit, as well as to alleviate potential infectious diseases such as COVID-19. Methods: For research purposes, the investigation and analysis of space utilization were based on architectural floor plans, research papers and literature, related legal systems, and public statistics. Of the main 35 regional public hospitals, in regards to data accessibility, 15 facilities were selected to conduct the survey and analysis for the objective. Results: The space composition by area research results of kidney dialysis units in public hospitals are as follows: Firstly, most targets do not have required rooms in the access and support area, except for the hemodialysis beds in the treatment section. Secondly, the access area requires necessary room and space design that took into consideration of convenience and accessibility for patients. Thirdly, in regards to infection prevention and control, proper circulation and room plan is essential for storage and disposal of contaminated products and linen after use. For the treatment area, the arrangement plan needs to establish a visual connection between the isolation room, the nursing station, and the bed area. Additionally, consideration of circulation in the preparation, treatment, observation, examination, and all other rooms in the facility is required. Lastly, for the support area, the room is designed to consider adequate working and meeting spaces for the medical staff, consultation space for patients or guardians, separate storage and disposal of clean and contaminated items, and the storage of various equipment for dialysis. Implications: In preparation for the increase in chronic kidney failure patients and the spread of infectious diseases, such as COVID-19, the researched data demonstrates the basic guidelines for space composition of kidney dialysis units and the significant role of regional public hospitals.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.2
• /
• pp.111-116
• /
• 1982

For the effective utilization of the fish resources in coastal regions, investigations on processing conditions of frozen-dried product, quality stability of the Product during storage, and utilization as a food material were carried out with the filefish, Navoden modestus. The processing condition was determined with the moisture content and texture of the product. The duality of the product was evaluated on chemical composition, rehydration capacity, TBA value, browning, omission test and sensory score. The conditions for the processing of frozen-dried filefish under the conditions of freezing temperature at $-10^{\circ}C$ and forced air thawing at $56{\pm}2^{\circ}C$ with a velocity of 1 m/sec were as follows : freezing temperature, $-10^{\circ}C$ : freezing time, 10 hours; thawing time, 2 hours ; and repeated number of freezing and thawing, 5 times. The yield, the condition of moisture and protein were $10.2\%,\;23.6\%\;and\;70.6\%$, respectively. The frozen-dried product packed with air and stored at room temperature showed no remarkable changes in TBA value, rehydration capacity, browning during the storage period of 90days. The frozen-dried filefish showed no remarkable differences in the taste, odor and texture, comparing with frozen-dried Alaska pollack on the market.

• KIEAE Journal
• /
• v.16 no.6
• /
• pp.77-82
• /
• 2016

Purpose: Almost every research carried out in our country against the natural disaster is focused on the temporary facilities such as temporary housing, emergency shelter and as a result, it is very hard to find out researches on the ordinary houses which installed integrated systems of hazard-resistant against the natural disaster. Method: To conduct this research, categorizing process for design, structural, environmental and installation elements found in the Hazard-Resistant and Reduction House built for sale in Japan was performed. Result: In this study, several design concepts and subordinate items are recommended for hazard-resistant housing. First, design concept of 'Preparedness' which means security and access to the storage storing goods especially food & beverage for the emergencies is needed. The subordinate items consist of security of stocking space, diversified and circular storage system, and safety storage system. Second, design concept of 'Security' which means security of physical safety space and rapid recovery to returning to daily life against natural disaster is needed. The subordinate items consist of many items including not only structure and facilities but also architectural design method. And finally, design concept of 'Maintenance, Support and Return' which means minimizing the physical and psychological damages and support safety and physical conditions of the victims from the impact of the disaster to returning to daily life is needed. The subordinate items consist of high efficiency insulation/airtightness design, microclimate design, combination of photovoltaic system and storage battery, non-power appliance system against the power failure, storing system for drinking water, rainwater storing and utilization system.