• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.6
• /
• pp.718-724
• /
• 1998

Twelve gilts were used to investigate the effect of lysine to protein ratio (5.2 g lysine/100 g CP vs. 6.7 g lysine/100 g CP) in practical diets on nitrogen retention and the efficiency of utilization in growing pigs. Treatments involved 2 levels of dietary lysine (5.2 or 6.7 g/100 g CP) and 3 levels of dietary crude protein (11, 14 and 17% in diet). Nitrogen retention was greatest when pigs were fed the control diet containing 17% protein. Nitrogen retention progressively increased as dietary protein increased (p < 0.01), but it was not affected by lysine concentration (g/100 g CP). Apparent biological value (ABV, nitrogen retained/apparently digestible nitrogen) was estimated to be ~50% at the maximum nitrogen retention. ABV was not affected by lysine concentration, but declined (p < 0.05) as the dietary protein level increased. The efficiency of intake N used for maximum nitrogen retention was approximately 44%. One gram of lysine supported approximately 9 to 10 g apparent protein accretion (nitrogen retention ${\times}$ 6.25/lysine intake) in pigs fed control diets. The efficiency of lysine utilization for protein accretion was lower in pigs fed high-lysine diets (6.7 g lysine/l00 g CP) so that 1 g of lysine accounted for 7 to 8 g of protein accretion in these pigs (p < 0.01). The lysine required to support maximum nitrogen retention in pigs fed high-lysine diets was higher than that in pigs fed control diets, which suggests that lysine was over-fortified relative to crude protein, since practical diets can not be formulated without excess of some amino acids. In summary the concentration of 5.2 g total lysine/100 g CP in diet is more appropriate for corn-soybean diets than the commonly suggested the content of 6.7 g total lysine/100 g CP.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.10
• /
• pp.95-100
• /
• 2014

To solve the problem of conventional fossil energy, utilization of renewable energy is growing rapidly. Solar energy as an energy source is infinite, and a variety of research is being conducted into its utilization. To change solar energy into electrical energy, we need to build a solar power plant. The efficiency of such a plant is strongly influenced by meteorological factors; that is, its efficiency is determined by solar radiation. However, when analyzing observed generation data, it is clear that the generated amount is changed by various factors such as weather, location and plant efficiency. In this paper, we proposed a solar power generation prediction algorithm using geographical factors such as latitude and elevation. Hence, changes in generated amount caused by the installation environment are calculated by curve fitting. Through applying the method to calculate this generation amount, the difference between real generated amount is analyzed.

• Journal of Distribution Science
• /
• v.18 no.9
• /
• pp.67-75
• /
• 2020

Purpose: The purpose of this study is to enhance sales promotion efficiency for using solid refuse fuel facilities. Renewable energy technology using Solid Refuse Fuel (SRF) is an economic efficiency technology that recovers waste by burning various wastes. A survey on the pollutants discharged from the solid fuels facilities was investigated so that the SRF facilities could be expanded, distributed and reflected in the policy. Research design, data, and methodology: In this study, 9 business sites using SRF and Bio-SRF as main raw materials were investigated for 2 years. The characteristics of target business sites such as the type of fuel used, combustion method, combustion temperature, daily fuel consumption and environmental prevention facilities were studied. Results: The average pollution & ammonia concentration of Bio-SRF facilities was found to be 88.15% higher than that of SRF facilities. But the average acetaldehyde concentration of SRF facilities was found to be 88.15% higher than that of Bio-SRF facilities. Conclusions: The main issue is how much electric power generation using combustible materials affects air pollution. The waste recycling law provides the standard value according to the fuel property, but there is a considerable gap with the mixed fuel. Therefore, for efficient utilization of facilities using solid fuel products, additional research is needed to improve the distribution structure of exhaust pollutants is needed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.41 no.6
• /
• pp.485-492
• /
• 2008

To propose proper vessel characteristics for sustainable fisheries in Korean waters, we analyzed the fishing capacity, scale efficiency and utilization of large pair-trawl vessels based on the database of catch, effort and vessel characteristics (gross tonnage and engine power) in 1990 by applying data envelopment analysis (DEA). The input factors were gross tonnage, horse power and days operated; whereas the output factor was expected catch by vessel characteristics. The optimal vessel types, selected based on the input-oriented technical efficiency and gross tonnages, was 100 GT with engine power <600 HP. The output-oriented unbiased estimate of capacity utilization (CD) decreased with increasing vessel tonnage. For the same tonnage vessels, the CD decreased with increasing engine power.

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.129-137
• /
• 2019

The purpose of this study is to analyze the efficiency of budget utilization of science and technology by the Chinese autonomous province and to present the direction of improvement. Data were obtained from the 2013-2017 statistical yearbook of higher education published by the Ministry of Education of China, and efficiency was analyzed using the malmquist analysis method. The analysis found that the low technological progress caused changes in the productivity MPI index, and that cities affected by technological efficiency needed to improve internal factors such as internal coordination and restructuring of universities in the region to increase efficiency. And it was found that areas affected by technological change needed proper response to external factors such as government policy, economic environment, social environment or technological development. This study is meaningful in that it presented reference data in enhancing efficiency of budget utilization of science and technology by autonomy of China, and it is necessary to establish strategies and study essential factors to increase efficiency of inefficient areas in the future.

• International journal of advanced smart convergence
• /
• v.8 no.4
• /
• pp.121-129
• /
• 2019

We are based on the results of this study, the policy measures for improving the efficiency of supply & demand policy of public cremation facilities in six metropolitan cities in the whole nation could be suggested as follows. First, when the utilization rate of public cremation facilities by citizents out of the jurisdiction area was lower, the overall demand for cremation was high. Therefore, the supply & demand policy of public cremation facilities should be carried forward by preferentially focusing on Busan Metropolitan City(4.1%) and Daegu Metropolitan City(17.9%) with low utilization rate by citizens out of the jurisdiction area. Second, the utilization variance of public cremation facilities in the whole six metropolitan cities in the whole nation, was insignificant(1.4%). Therefore, for the efficiency of supply & demand policy of cremation facilities in those six metropolitan cities, the customized-policies considering the characteristics of each metropolitan city should be carried forward in priority. Third, on the basis of 2018, the population size of those six metropolitan cities in the whole nation is from minimum 1.15million to maximum 3.39million as a large city, and relatively, they are facing many difficulties in the expansion for supply & demand of cremation facilities. Therefore, for the smooth construction of cremation facilities, it would be necessary to enforce policies that could disperse the demand for cremation through the joint construction of cremation facilities with other local governments close to each metropolitan city.

• International Journal of Highway Engineering
• /
• v.19 no.2
• /
• pp.143-152
• /
• 2017

PURPOSES : This study intends to estimate the tangible benefits derived from the integration of operations of an Express Intercity Bus Terminal and a Highway Service Area. METHODS: For the study, a highway service area was chosen to function as a bus terminal, integrating its services with that of a nearby bus terminal plagued by operating losses. The exercise also helped improve mobility owing to the introduction of local buses between the terminals and utilization of the existing infrastructure such as rest areas. Thus, a terminal that was not being utilized for its intended functionality was integrated with an existing facility to improve the utilization of both and subsequently aid local development. The impact of the exercise was then measured by evaluating the variation in utilization efficiency, operating costs, travel time between two regions (Seoul-Jeomchon and Seoul-Geumsan), and the social costs before and after the integration of the two facilities. RESULTS :The impact of the integration was an increase in utilization efficiency, a decrease in operating cost, a decrease in travel time, and a decrease in social cost in both the regions. The benefits of improved utilization and cost saving can be passed on to the citizens in the form of discounts. A local power generation facility will eventually replace the bus terminal, which can revitalize the local economy. CONCLUSIONS :The integration of the highway service area with the bus terminal is expected to have a win-win effect on the passengers as well as the operators. The study also proposes a sustainable strategic plan for existing terminals and rest areas to implement a method to compete with KTX transportation.

• Tunnel and Underground Space
• /
• v.32 no.4
• /
• pp.254-271
• /
• 2022

The performance of truck haulage operations in an underground mine was evaluated using the time usage model and key performance indicators (KPIs) proposed by Global Mining Guidelines Group (GMG). An underground mine that mainly produces iron and titanium iron was selected as a study area, and truck haulage data were collected using Bluetooth beacons and tablet PCs. The collected data were analyzed to identify unit operations, activities, events, and required time of truck haulage operations, and time categories were classified based on the time usage model. The performance of the haulage operations was evaluated using nine indicators in terms of availability, utilization, and effectiveness. As a result, in terms of availability, uptime was 33.9%, physical availability was 95.7%, and mechanical availability was 94.9%. In the case of utilization, use of availability was 83.1%, asset utilization was 28.1%, and operating and effective utilization were 79.6% and 77.7%, respectively. Also, in terms of efficiency, operating efficiency was high at 97.6%, and production effectiveness was found to be 49%.

• IE interfaces
• /
• v.15 no.3
• /
• pp.316-324
• /
• 2002

Automated Guided Vehicles are widely used as an essential material handling system for FMS to provide flexibility and efficiency. We suggest a new dispatching rule based on priority function which considers urgency and empty vehicle travel time under finite buffer capacity. We evaluate the performance of the proposed rule by comparing the performance of Shortest Travel Time/Distance(STT/D) rule in terms of machine utilization, throughput and WIP level using simulation. The simulation results show that the suggested dispatching rule is robust and provides better machine utilization, throughput with comparable WIP level compared to STT/D rule.

• Journal of Information Technology Applications and Management
• /
• v.13 no.2
• /
• pp.99-113
• /
• 2006

It is hardly achieved Electronic Commerce (EC) activation if there isn't any performance in spite of the estimation that EC would improve whole economic efficiency. Therefore, there should be a need for the research whether implementation and utilization of EC really improve companies' business performance. The primary purpose of this study is to investigate the level of EC utilization in Small and medium sized enterprises (SMEs) and analyze its effect on business performance in terms of BSC. The results indicate that EC utilization in various fields of business and the use of information created through EC are significantly related to higher business performance, but EC volume is not. This study examines facing problems of SMEs in utilizing EC as well.