• Asian-Australasian Journal of Animal Sciences
• /
• 제11권6호
• /
• pp.718-724
• /
• 1998

Twelve gilts were used to investigate the effect of lysine to protein ratio (5.2 g lysine/100 g CP vs. 6.7 g lysine/100 g CP) in practical diets on nitrogen retention and the efficiency of utilization in growing pigs. Treatments involved 2 levels of dietary lysine (5.2 or 6.7 g/100 g CP) and 3 levels of dietary crude protein (11, 14 and 17% in diet). Nitrogen retention was greatest when pigs were fed the control diet containing 17% protein. Nitrogen retention progressively increased as dietary protein increased (p < 0.01), but it was not affected by lysine concentration (g/100 g CP). Apparent biological value (ABV, nitrogen retained/apparently digestible nitrogen) was estimated to be ~50% at the maximum nitrogen retention. ABV was not affected by lysine concentration, but declined (p < 0.05) as the dietary protein level increased. The efficiency of intake N used for maximum nitrogen retention was approximately 44%. One gram of lysine supported approximately 9 to 10 g apparent protein accretion (nitrogen retention ${\times}$ 6.25/lysine intake) in pigs fed control diets. The efficiency of lysine utilization for protein accretion was lower in pigs fed high-lysine diets (6.7 g lysine/l00 g CP) so that 1 g of lysine accounted for 7 to 8 g of protein accretion in these pigs (p < 0.01). The lysine required to support maximum nitrogen retention in pigs fed high-lysine diets was higher than that in pigs fed control diets, which suggests that lysine was over-fortified relative to crude protein, since practical diets can not be formulated without excess of some amino acids. In summary the concentration of 5.2 g total lysine/100 g CP in diet is more appropriate for corn-soybean diets than the commonly suggested the content of 6.7 g total lysine/100 g CP.

• 조명전기설비학회논문지
• /
• 제28권10호
• /
• pp.95-100
• /
• 2014

To solve the problem of conventional fossil energy, utilization of renewable energy is growing rapidly. Solar energy as an energy source is infinite, and a variety of research is being conducted into its utilization. To change solar energy into electrical energy, we need to build a solar power plant. The efficiency of such a plant is strongly influenced by meteorological factors; that is, its efficiency is determined by solar radiation. However, when analyzing observed generation data, it is clear that the generated amount is changed by various factors such as weather, location and plant efficiency. In this paper, we proposed a solar power generation prediction algorithm using geographical factors such as latitude and elevation. Hence, changes in generated amount caused by the installation environment are calculated by curve fitting. Through applying the method to calculate this generation amount, the difference between real generated amount is analyzed.

• 유통과학연구
• /
• 제18권9호
• /
• pp.67-75
• /
• 2020

Purpose: The purpose of this study is to enhance sales promotion efficiency for using solid refuse fuel facilities. Renewable energy technology using Solid Refuse Fuel (SRF) is an economic efficiency technology that recovers waste by burning various wastes. A survey on the pollutants discharged from the solid fuels facilities was investigated so that the SRF facilities could be expanded, distributed and reflected in the policy. Research design, data, and methodology: In this study, 9 business sites using SRF and Bio-SRF as main raw materials were investigated for 2 years. The characteristics of target business sites such as the type of fuel used, combustion method, combustion temperature, daily fuel consumption and environmental prevention facilities were studied. Results: The average pollution & ammonia concentration of Bio-SRF facilities was found to be 88.15% higher than that of SRF facilities. But the average acetaldehyde concentration of SRF facilities was found to be 88.15% higher than that of Bio-SRF facilities. Conclusions: The main issue is how much electric power generation using combustible materials affects air pollution. The waste recycling law provides the standard value according to the fuel property, but there is a considerable gap with the mixed fuel. Therefore, for efficient utilization of facilities using solid fuel products, additional research is needed to improve the distribution structure of exhaust pollutants is needed.

• 한국수산과학회지
• /
• 제41권6호
• /
• pp.485-492
• /
• 2008

To propose proper vessel characteristics for sustainable fisheries in Korean waters, we analyzed the fishing capacity, scale efficiency and utilization of large pair-trawl vessels based on the database of catch, effort and vessel characteristics (gross tonnage and engine power) in 1990 by applying data envelopment analysis (DEA). The input factors were gross tonnage, horse power and days operated; whereas the output factor was expected catch by vessel characteristics. The optimal vessel types, selected based on the input-oriented technical efficiency and gross tonnages, was 100 GT with engine power <600 HP. The output-oriented unbiased estimate of capacity utilization (CD) decreased with increasing vessel tonnage. For the same tonnage vessels, the CD decreased with increasing engine power.

• 디지털융복합연구
• /
• 제17권12호
• /
• pp.129-137
• /
• 2019

본 연구의 목적은 중국 자치성별 과학기술 예산활용 효율성을 분석하고 개선방향을 제시하는 것이다. 중국교육부가 공시한 2013-2017년의 고등교육 통계연감에서 데이터를 확보하여, 맘퀴스트 분석방법을 활용해 투입대비 산출의 효율성을 분석하였다. 분석결과 기술 진보가 낮은 것은 생산성 MPI지수의 변동을 일으키는 원인이며, 기술적 효율성의 영향을 받은 도시는 효율성을 높이려면 지역 내 대학의 내부 조율, 구조조정 등 내부적 요인의 개선이 필요한 것으로 파악되었다. 기술변화의 영향을 받은 지역은 정부정책, 경제 환경, 사회 환경이나 기술의 발전 등 외적 요인에 대한 적절한 대응이 필요한 것으로 파악되었다. 본 연구는 중국의 자치성별로 과학기술 예산활용 효율성을 제고하는 데에 참고자료를 제시하였다는데 의의가 있으며, 향후 비효율적인 지역의 효율성을 높이기 위한 전략의 수립 및 필수적인 요소에 대한 연구가 필요하다.

• International journal of advanced smart convergence
• /
• 제8권4호
• /
• pp.121-129
• /
• 2019

We are based on the results of this study, the policy measures for improving the efficiency of supply & demand policy of public cremation facilities in six metropolitan cities in the whole nation could be suggested as follows. First, when the utilization rate of public cremation facilities by citizents out of the jurisdiction area was lower, the overall demand for cremation was high. Therefore, the supply & demand policy of public cremation facilities should be carried forward by preferentially focusing on Busan Metropolitan City(4.1%) and Daegu Metropolitan City(17.9%) with low utilization rate by citizens out of the jurisdiction area. Second, the utilization variance of public cremation facilities in the whole six metropolitan cities in the whole nation, was insignificant(1.4%). Therefore, for the efficiency of supply & demand policy of cremation facilities in those six metropolitan cities, the customized-policies considering the characteristics of each metropolitan city should be carried forward in priority. Third, on the basis of 2018, the population size of those six metropolitan cities in the whole nation is from minimum 1.15million to maximum 3.39million as a large city, and relatively, they are facing many difficulties in the expansion for supply & demand of cremation facilities. Therefore, for the smooth construction of cremation facilities, it would be necessary to enforce policies that could disperse the demand for cremation through the joint construction of cremation facilities with other local governments close to each metropolitan city.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.143-152
• /
• 2017

PURPOSES : This study intends to estimate the tangible benefits derived from the integration of operations of an Express Intercity Bus Terminal and a Highway Service Area. METHODS: For the study, a highway service area was chosen to function as a bus terminal, integrating its services with that of a nearby bus terminal plagued by operating losses. The exercise also helped improve mobility owing to the introduction of local buses between the terminals and utilization of the existing infrastructure such as rest areas. Thus, a terminal that was not being utilized for its intended functionality was integrated with an existing facility to improve the utilization of both and subsequently aid local development. The impact of the exercise was then measured by evaluating the variation in utilization efficiency, operating costs, travel time between two regions (Seoul-Jeomchon and Seoul-Geumsan), and the social costs before and after the integration of the two facilities. RESULTS :The impact of the integration was an increase in utilization efficiency, a decrease in operating cost, a decrease in travel time, and a decrease in social cost in both the regions. The benefits of improved utilization and cost saving can be passed on to the citizens in the form of discounts. A local power generation facility will eventually replace the bus terminal, which can revitalize the local economy. CONCLUSIONS :The integration of the highway service area with the bus terminal is expected to have a win-win effect on the passengers as well as the operators. The study also proposes a sustainable strategic plan for existing terminals and rest areas to implement a method to compete with KTX transportation.

• 터널과지하공간
• /
• 제32권4호
• /
• pp.254-271
• /
• 2022

본 연구에서는 GMG (Global Mining Guidelines Group)에서 제안한 시간 사용 모델과 핵심성과지표(KPIs)들을 이용하여 트럭 운반작업에 대한 성과를 평가한 결과를 제시하였다. 이를 위해 철과 티탄 철을 주로 생산하는 국내 지하광산을 연구지역으로 선정한 다음 블루투스 비콘과 태블릿 PC를 이용하여 트럭 운반작업 데이터를 수집하였다. 수집된 데이터를 분석하여 트럭 운반작업의 단위작업, 활동 및 이벤트, 소요시간을 식별하였으며, 시간 사용 모델을 기반으로 시간 범주를 분류하였다. 트럭 운반작업의 성과는 가용률, 이용률, 효율성 측면의 9개 성과지표를 이용하여 평가하였다. 그 결과, 가용률 측면에서는 가동시간이 33.9%, 물리적 가용률은 95.7%, 기계적 가용률은 94.9%로 나타났다. 이용률의 경우, 가용장비 이용률은 83.1%, 자산 이용률은 28.1%, 운영 및 유효 이용률은 각각 79.6%, 77.7%로 나타났다. 또한, 효율성 측면에서는 운영 효율성이 97.6%로 높게 나타났으며, 생산 효율성은 49%로 나타났다.

• 산업공학
• /
• 제15권3호
• /
• pp.316-324
• /
• 2002

Automated Guided Vehicles are widely used as an essential material handling system for FMS to provide flexibility and efficiency. We suggest a new dispatching rule based on priority function which considers urgency and empty vehicle travel time under finite buffer capacity. We evaluate the performance of the proposed rule by comparing the performance of Shortest Travel Time/Distance(STT/D) rule in terms of machine utilization, throughput and WIP level using simulation. The simulation results show that the suggested dispatching rule is robust and provides better machine utilization, throughput with comparable WIP level compared to STT/D rule.

• Journal of Information Technology Applications and Management
• /
• 제13권2호
• /
• pp.99-113
• /
• 2006

It is hardly achieved Electronic Commerce (EC) activation if there isn't any performance in spite of the estimation that EC would improve whole economic efficiency. Therefore, there should be a need for the research whether implementation and utilization of EC really improve companies' business performance. The primary purpose of this study is to investigate the level of EC utilization in Small and medium sized enterprises (SMEs) and analyze its effect on business performance in terms of BSC. The results indicate that EC utilization in various fields of business and the use of information created through EC are significantly related to higher business performance, but EC volume is not. This study examines facing problems of SMEs in utilizing EC as well.