• Proceedings of the KIPE Conference
• /
• 1996.06a
• /
• pp.103-108
• /
• 1996

In this paper, a novel utility connected photovoltaic power generation system with unity power factor and uninterruptable power system facility and its control strategy are proposed. The proposed photovoltaic(PV) system is connected in parallel between utility and load. The PV system provides an uninterruptable voltage to load, a maximum power tracking to solar array, and power factor correction to the utility. The proposed system has the following advantages compared with the conventional utility connected PV system. 1. Harmonic elimination Function 2. Feeding the photovoltaic energy to the utility 3. Providing the uninterruptible power source along battery to the load In case that the photovoltaic array system is on the poor power generation, the battery and capacitor of the PV system are charged by three phase utility source and the inverter in the PV system only provides the reactive current to eliminate the harmonic current exited on the utility. In the normal operation mode, the PV system supplies active power to load and reactive power to utility in order to maintain the unity power factor and to regulate ac load voltage.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.61-63
• /
• 2005

Utility interactive photovoltaic systems is one of the most premising applications of photovoltaic systems. These systems are employed in applications where utility service is already available. In this case, there is no need for battery storage because utility power may be used to supplement photovoltaic systems when the load exceeds available PV generation. The load receives electricity from both the photovoltaic array and the utility inter-tied. In this paper, Principle and operating characteristic of Utility Interconnected Photovoltaic System is presented. For the purpose of optimal utility Inter-tied photovoltaic system design and installation. It is that demonstrate throughout the installed 3 PV system respectively, 3kW utility interconnected residential system.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2007.11a
• /
• pp.592-601
• /
• 2007

In the conventional double auction approaches, two basic assumptions are usually applied - (1) each trader has a linear or quasi-linear utility function of price and quantity, (2) buyers as well as sellers have identical utility functions. However, in practice, these assumptions are unrealisitc. Therefore, a flexible and integrated double auction mechanism that can integrate all traders' diverse utility functions is necessary. We propose a double auction mechanism with resource allocation based on nonlinear utility functions, namely a flexible synchronous double auction system where each participant can express a diverse utility function on the price and quantity. In order to optimize the total market utility consists of multiple complex utility functions of traders, our study proposes a genetic algorithm (GA) We show the viability of the proposed mechanism through several simulation experiments.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.9
• /
• pp.562-568
• /
• 2004

The frequency and phase angle of the utility voltage are important in many industrial systems. In the three-phase system, they can be easily known by using the utility voltage vector. However, in the case of single phase system, there are some difficulties in detecting the information of utility voltage. In conventional system, the zero-crossing detection method is widely used, but could not obtain the information of utility voltage instantaneously. In this paper, the new digital PLL control using virtual two phase detector is proposed with a detailed analysis of single-phase digital PLL control for utility connected systems. The experimental results under various utility conditions are presented and demonstrate an excellent phase tracking capability in the single-phase grid-connected operation.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.7
• /
• pp.79-85
• /
• 2019

We investigate the D2D utility maximization in the cellular system. We focus on the non cooperative game theoretic approach to maximize the individual utility. Cellular system's perspective, interference from the D2D links must be limited to protect the cellular users. To accommodate this interference issue, utility function is first defined to control the individual D2D user's transmit power. More specifically, utility function includes the pricing which limits the individual D2D user's transmit power. Then, non cooperative power game is formulated to maximize the individual utility. Distributed algorithm is proposed to maximize the individual utility, while limiting the interference. Convergence of the proposed distributed algorithm is verified through computer simulation. Also the effect of pricing factor to SIR and interference is provided to show the performance of the proposed distributed algorithm.

• East Asian Economic Review
• /
• v.21 no.4
• /
• pp.317-342
• /
• 2017

The US dollar has kept as a position of key currency in the global economy in the changing international monetary system where the euro was introduced to some states of the EU in 1999. It is an evidence of inertia of the US dollar as a key currency. Our previous study (Ogawa and Muto, 2017b) conducted empirical analysis to investigate effects of several events on inertia of the US dollar. One of our findings was that the introduction of the euro increased utility of euro while utility of US dollar was kept unchanged. This paper examines the effects of the global financial crisis and the euro zone crisis as well as the introduction of the euro on the utility of the Japanese yen. The introduction of the euro significantly decreased the utility of the Japanese yen. It indicates that the introduction of the euro increased the utility of the euro while reducing the utility of the Japanese yen rather than the utility of the US dollar. The utility of the Japanese yen has significantly decreased while the global financial crisis and the euro zone crisis occurred. The Japanese yen has a declining trend in terms of its utility over time in the changing international monetary system.

• Proceedings of the SAREK Conference
• /
• 2005.11a
• /
• pp.235-240
• /
• 2005

Recently urban utility plants in urban areas of Korea, such as energy supply systems, municipal waste incineration systems, sewage treatment systems and so on, have caused some critical troubles, for instance the insensitive response to the seasonal or daily variation of loads, the low system efficiency and inefficient use of energy because of the large-scale system located a great distance. Therefor the design method of optimal integrated system model of various urban utility plants proposed in this study suitably to the present situation of Korea. Also, the effect analysis for the introduction of compound utility plants was studied for a new town model on a 60,000 persons scale. As the results we found that the complex plant was superior to individual urban utility plant in side of the initial investment expenses, the operating cost and other reasons.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.8
• /
• pp.536-543
• /
• 2000

The photovoltaic power generation system has a great future as clean energy instead of fossil fuel which has many environmental problems such as exhausted gas or air pollution. In a utility interactive photovoltaic generation system, a three-phase inverter is used for the connection between the photovoltaic array and the utility. This paper present a three phase inverter for photovoltaic power system with current controller, voltage controller, PLL Control system and the Phase detector of Interactive Voltage by using dq transformation. The proposed inverter system provides a sinusoidal ac current for domestic loads and the utility line with unity power factor.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.23 no.4
• /
• pp.77-84
• /
• 2017

Purpose: In terms of the flexibility in hospital architecture, there are fixed elements of hospital architecture: mechanical, electrical, aeration rooms and shafts, which are the main utility spaces. Thus, it is necessary to recognize the utility space as a system that helps internal functions and flexible internal changes. This study analyzes the notion of the main utility space in hospital architecture and the architectural planning features of the main utility spaces as the system in the design process of the recently built hospitals. Methods: The design factors are extracted comparing two hospitals' plans in each stage and the systematic characteristics of utility spaces are analyzed accordingly. The opinions gathered from interviews of practitioners, architects and facility planning experts directly involved in the architecture design process are analyzed and reflected in the results. Results: Planning for utility spaces should be accompanied by the architectural plan from the basic design process, and proceeded with recognizing utility spaces as a system, which is a fixed element. Utility spaces are highly organically connected. Horizontal and vertical distribution of air chambers can reduce the length and number of ducts, and thus save story height, and reduce the number of shafts, the vertical connection passage. This is advantageous in securing the variable area, which is the ultimate objective of the system-centered hospital architecture plan. Implications: Thereby aims to provide fundamental data on systematic utility space planning in the hospital architecture planning.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.4
• /
• pp.323-329
• /
• 1998

In this paper, we compose of the utility interactive photovoltaic(PV) generation system with a PWM stepdown chopper and a current source inverter. The stepdown chopper is controlled by the several gate pulses (twice frequency of utility voltage, square pulse and without the chopper) of chopper part to reduce pulsation of DC current and size of DC reactor. PV current only is measured for maximum power point tracking without any influence on the variation of insolation and temperature. Therefore, we can control modulation factor of the chopper to operate at maximum power point of solar cell. And, the utility interactive photovoltaic generation system supplies an AC power to the load and the utility power system.