• 제목/요약/키워드: Utility Grid

검색결과 244건 처리시간 0.043초

태양광발전용 인버터 보호기능시험 성능평가 (Performance Evaluation with Protective Function test of Inverter for Solar Power Generation)

  • 윤용호
    • 전기학회논문지
    • /
    • 제67권11호
    • /
    • pp.1570-1575
    • /
    • 2018
  • The increased penetration of PV is impacting on grid operation and in particular the voltage within the local grid can be significantly influenced by the various PV systems. The increased penetration of PV is impacting on grid operation and in particular the voltage within the local grid can be significantly influenced by the various PV systems. This paper describes domestic technical standard of Photovoltaic(PV) PCS(Power Conditioning Systems)- Characteristics of the utility interface. Especially protective function test items of 1) Output overvoltage protection test, 2) Output undervoltage protection test, 3) Frequency rise protection test, 4) Frequency fall protection test, 5) System voltage's momentary interruptions, 6) System voltage distortion capability test. Therefore in this paper protective function test item of facilities evaluation detailed standards for new renewable energy, small, medium and large photovoltaic inverter standard is studied and analyzed and finally full tested by PV inverter performance function.

New MPPT Control Strategy for Two-Stage Grid-Connected Photovoltaic Power Conditioning System

  • Bae, Hyun-Su;Park, Joung-Hu;Cho, Bo-Hyung;Yu, Gwon-Jong
    • Journal of Power Electronics
    • /
    • 제7권2호
    • /
    • pp.174-180
    • /
    • 2007
  • In this paper, a simple control method for two-stage utility grid-connected photovoltaic power conditioning systems (PCS) is proposed. This approach enables maximum power point (MPP) tracking control with post-stage inverter current information instead of calculating solar array power, which significantly simplifies the controller and the sensor. Furthermore, there is no feedback loop in the pre-stage converter to control the solar array voltage or current because the MPP tracker drives the converter switch duty cycle. This simple PCS control strategy can reduce the cost and size, and can be utilized with a low cost digital processor. For verification of the proposed control strategy, a 2.5kW two-stage photovoltaic grid-connected PCS hardware which consists of a boost converter cascaded with a single-phase inverter was built and tested.

태양광-배터리-수퍼캡을 갖는 직류 홈 그리드의 설계 및 운영 (Design and Operation of DC Home Grid with PV-Battery-Ultracapacitor)

  • 헤리얀토 누르;이동춘
    • 전력전자학회논문지
    • /
    • 제25권2호
    • /
    • pp.103-110
    • /
    • 2020
  • In this study, the design and operating strategy of DC home grid with PV, battery, and ultracapacitor have been discussed, The proposed sizing method can find the optimum size of the battery and PV which can reduce yearly utility energy consumption, whereas the control scheme can maintain the DC-bus voltage level of the DC home grid under different operating conditions, where day or night time operation, load and PV power levels, and the maximum current and state-of-charge of batter are considered. In addition, a supervisory power management strategy has been suggested, and its validity has been verified by HILS (hardware in-the-loop simulation) results.

풍력발전시스템의 배전선로 전압 영향분석 (Distribution Line Voltage Impact Analysis of Wind Power Generation System)

  • 나경윤;고성민;김세호;이수묵;신삼균;김문찬
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
    • /
    • pp.1759-1761
    • /
    • 2005
  • The exploitation of the resource wind energy is a rapidly growing area world-wide. The number of installed units is continuously increasing, and therefore, it is important to respect and to deal with the impact of wind power generation system. From the view of an electric grid utility, there is a major problem with the impact of the wind system on the voltage of the electric grid, to which a turbine in connected. The problem is rather common in the connection of a wind power system to an already existing grid, since the grid is very seldom designed for the transmission of additional power. In this paper, it is investigated the voltage impact of distribution line, to which wind power generation system is connected.

  • PDF

D1 소규모 배전 변전소를 위한 IEEE 802.15.4 성능 분석 (Performance Analysis of IEEE 802.15.4 for D1 Small Distribution Substation)

  • 황성호;강은영
    • 한국인터넷방송통신학회논문지
    • /
    • 제17권1호
    • /
    • pp.115-121
    • /
    • 2017
  • 스마트 그리드 응용에서 ICT(Information and Communication Technologies) 활용은 전력망을 효율성 있고 신뢰성 있게 구축할 수 있다. 전력 시설 내에서 필요한 정보를 교환하는 스마트 그리드 표준으로 IEC 61850이 채택되었다. 그러나 이더넷을 사용하는 IEC 61850과 같은 기술을 소규모 배전 변전소 자동화에 직접 적용하면, 소규모 배전 변전소 그 자체의 가치보다 더 많은 비용이 소요될 수 있다. IEEE 802.15.4 기술은 적은 설치비용과 설치의 용이성으로 인해 전력 설비 자동화 분야에서 관심을 받고 있다. 다소 덜 엄격한 성능이 요구되는 D1 소규모 배전 변전소에 IEEE 802.15.4를 이용하는 연구들이 진행되고 있다. 본 논문에서는 소규모 배전 변전소에 IEEE 802.15.4를 적용하고, 실제 장비들을 이용하여 성능분석을 수행 하였다. 성능 분석 결과를 IEC 61850 메시지 유형과 비교 분석하여 IEEE 802.15.4 적용 범위를 결정하였다.

DCU 보안요구사항 분석 및 CC v3.1 기반의 보호프로파일 개발 (Analysis of Security Requirements on DCU and Development Protection Profile based on Common Criteria Version 3.1)

  • 조영준;김신규
    • 정보보호학회논문지
    • /
    • 제24권5호
    • /
    • pp.1001-1011
    • /
    • 2014
  • 스마트그리드 환경에서 이용되는 기기들은 양방향 통신이 가능하기 위해 다양한 통신 인터페이스를 가짐으로 기존 IT기술이 가지고 있는 보안 취약점을 그대로 가질 수 있다. 이러한 보안 위협과 공격에 대한 피해를 최소화하기 위해 스마트그리드 기기의 보안기능과 이에 대한 평가 인증에 대한 필요성은 증가하고 있다. DCU는 스마트 미터의 정보를 중간 수집하여 유틸리티에 전송하는 중간 집계 장치로, 가정 내 위치하는 스마트 미터와 유틸리티 내부의 서버와 중간 위치에 설치되어 DCU가 공격받는 경우, 중간 거점으로 활용되는 등 위험성이 존재한다. 그러나 현재 DCU 보안성 평가와 관련된 연구가 미흡하여 DCU의 보안성을 확보하고 이를 평가, 인증할 수 있는 방법이 존재하지 않는다. 본 논문에서는 DCU의 보안성을 평가할 수 있는 보호프로파일을 개발하여 향후 개발자 또는 판매자에게는 보안목표명세서 작성에 도움을 주고, 사용자에게는 제품의 선정 및 운용관리에 활용할 수 있도록 한다.

자율운전에 의한 계통연계형 도서의 저압 무순단 마이크로그리드 구축 (Development of Low-voltage Seamless Transfer Microgrid on Grid-connected Type Islands by Autonomous Operation)

  • 김정헌;권정민;윤상윤
    • 전기학회논문지P
    • /
    • 제66권4호
    • /
    • pp.169-176
    • /
    • 2017
  • This paper presents research on low-voltage microgrids to maintain a continuous power supply to critical loads on grid-connected islands in Korea. The low-voltage microgrids of this paper focused on that changes public office buildings into uninterrupted microgrids by autonomous operation. For this, a microgrid controller (MGC) and a power conditioning system (PCS) that allow a seamless transfer between grid-connected and grid-isolated operation are proposed. The proposed PCS operates with a silicon controlled rectifier (SCR) switch and employs a simple structure. It supplies power continuously without operators through a coordinated operation between MGC and PCS. In addition, proposed MG has a schedule operation for minimizing electricity charges and provides ancillary services that enable the utilization of resources according to the operation purpose of utility distribution networks. To demonstrate the uninterrupted low-voltage microgrid proposed in this study, a microgrid was implemented and tested in a public office building in Anjwa Island, Jeollanam-do in Korea. A seamless, autonomous operation history, despite system disturbances, was obtained through a long-term demonstration of operation. The results showed that the proposed microgrid technology can be used to achieve energy resilience in grid-connected island areas.

계통 연계형 태양광 인버터에서 최대 출력 점 추적 제어 (Maximum Power Point Tracking Control for a Grid-Tie Photovoltaic Inverter)

  • 이우철
    • 조명전기설비학회논문지
    • /
    • 제23권5호
    • /
    • pp.72-79
    • /
    • 2009
  • 태양 에너지는 재생 가능하고 오염이 없는 특성으로 바람직한 에너지 원이다. 계통에 이용하기 위해서는 dc-dc 컨버터와 계통 연계 do-ac 인버터가 필요하다. dc-dc 컨버터는 태양광 시스템이 높은 dc전압에 동작하기 위하여 필요하고, 인버터는 계통에 연결하기 위하여 필요한 전압과 주파수를 만들어 내는데 필요하다. 본 논문에서는 첫째로 단상 계통 연계 인버터에서 전류 루프 전달 함수가 유도되고, 둘째로 컨버터 측에서 컨덕턴스 증가 방식의 MPPT 방식이 제안하여 인버터 측에 최대 전력을 공급하는데 있다. 시뮬레이션 결과가 계통에서 태양광 인버터 시스템의 성능과 특성을 보여준다.

Single-Phase Inverter for Grid-Connected and Intentional Islanding Operations in Electric Utility Systems

  • Lidozzi, Alessandro;Lo Calzo, Giovanni;Solero, Luca;Crescimbini, Fabio
    • Journal of Power Electronics
    • /
    • 제16권2호
    • /
    • pp.704-716
    • /
    • 2016
  • Small distributed generation units are usually connected to the main electric grid through single-phase voltage source inverters. Grid operating conditions such as voltage and frequency are not constant and can fluctuate within the range values established by international standards. Furthermore, the requirements in terms of power factor correction, total harmonic distortion, and reliability are getting tighter day by day. As a result, the implementation of reliable and efficient control algorithms, which are able to adjust their control parameters in response to changeable grid operating conditions, is essential. This paper investigates the configuration topology and control algorithm of a single-phase inverter with the purpose of achieving high performance in terms of efficiency as well as total harmonic distortion of the output current. Accordingly, a Second Order Generalized Integrator with a suitable Phase Locked Loop (SOGI-PLL) is the basis of the proposed current and voltage regulation. Some practical issues related to the control algorithm are addressed, and a solution for the control architecture is proposed, based on resonant controllers that are continuously tuned on the basis of the actual grid frequency. Further, intentional islanding operation is investigated and a possible procedure for switching from grid-tied to islanding operation and vice-versa is proposed.

SVPWM 방식 마이크로소스로 구성된 마이크로그리드 모델링 및 해석 (Modeling and Analysis of the Micro-Grid with SVPWM Micro-Sources)

  • 손광명;이계병;김영섭
    • 조명전기설비학회논문지
    • /
    • 제20권3호
    • /
    • pp.12-19
    • /
    • 2006
  • 마이크로소스는 1[kW]${\sim}$수[MW] 사이의 전력을 공급하고, 기존의 대규모 발전설비보다 높은 신뢰도와 에너지 효율을 가지는 고품질의 전력을 공급할 수 있다. 본 논문에서는 마이크로소스의 스위칭레벨 모델을 개발하였으며, 다수의 마이크로소스가 전력시스템과 연계되어 마이크로그리드를 형성할 경우의 특성에 대하여 연구하였다. 마이크로소스는 인버터의 효율을 극대화 할 수 있도록 공간벡터 펄스폭변조(Space Vector PWM, SVPWM) 기법을 채용하였으며, 마이크로소스의 제어시스템 파라미터 특성 및 마이크로소스 상호작용에 관하여 연구하였다. 마이크로소스는 PSCAD/EMTDC를 이용하여 구현하였으며 이를 이용해 마이크로그리드를 구성하여 시뮬레이션하였다. 사례 연구를 통하여 제안된 모델의 효용성을 확인하였다.