• 한국산학기술학회논문지
• /
• 제20권2호
• /
• pp.763-772
• /
• 2019

최근 TOD에 대한 지속적인 효과를 기대하고 실제 도시계획 및 설계에 적용되고 있다. 그러나 그것의 효과를 정량적으로 평가할 방법에 대한 연구는 미미한 실정이다. 그래서 본 연구의 목적은 TOD의 차량 통행 감소 효과를 도시계획 단계에서 토지이용계획도를 기반으로 정량적으로 평가하는 방법을 제안하는 것이다. 이를 위해서 토지이용계획도에 포함된 정보를 네트워크로 변환하는 방법과 네트워크를 기반으로 이동발생량을 추정하는 방법을 제안한다. 첫 번째 단계에서는 토지이용계획도의 도로망을 링크로, 도로의 교차점을 노드로 변환한다. 토지이용계획도에 포함된 구역의 면적과 구역별 높이는 인접노드에 가중치로 변환된다. 두 번째 단계에서는 네트워크상의 노드 간에 가중치에 비례한 빈도로 이동이 발생하는 것을 가정하여 이동발생량을 보행과 차량으로 구분하여 추정한다. 그다음 TOD를 본격적으로 적용하지 않은 도시를 대상으로 현재 도시와 TOD를 적용하여 재설계한 도시를 비교하여 TOD의 효과를 분석한다. 본 연구에서는 이와 같은 방법을 1997년 계획 당시 분당과 TOD를 적용하여 재설계한 가상 대안에 적용한 결과, 39.94% 정도의 차량 통행 감소 효과가 발생함을 확인하였다. 또한, TOD를 적용한 대안의 보행율이 2.39%로 현황보다 증가하고 있음을 알 수 있다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.363-366
• /
• 2007

Road Design is being reached to the working design to produce drawings, calculate construction quantity and cost, through the basic design that contained feasibility study and all impact assessment. In general, to plan the route we use topographic map. The vertical positional accuracy is 30cm and horizontal positional accuracy is 35cm in 1:1,000 scale topographic map. In LiDAR, vertical positional accuracy is 15cm and horizontal positional accuracy is 30cm. So if we use LiDAR on road design, more accurate earth-volumn will be calculated when we plan the route. In this paper we try to find the method to use the LiDAR data on road design by drawing the profile and cross sectional view and comparing the earth-volumn to the road that working design is in process adopting the topographic map and LiDAR data.

• 한국농촌건축학회논문집
• /
• 제1권2호
• /
• pp.75-82
• /
• 1999

The purpose of this study is to plan the social space for utilization in rural protestant church. Sindai church is the oldest and has rural characteristics in Chung-Ju. This model is used with the data which were obtained by the paster, believer, inhabitants. The results of this study are as follows ; The movable furnitures have merits of multi-use space in the rural protestant church. This could be possible the various functions for a flexible worship space.

• 한국정보시스템학회:학술대회논문집
• /
• 한국정보시스템학회 1996년도 추계학술발표회 발표논문집
• /
• pp.145-155
• /
• 1996

This paper is to describe the development of nesting software for the materials cutting plan of footwear manufacturing processes. In shoes cutting process, almost of the materials cutting plan is dependent upon worker's experience. Thus, the pattern nesting by worker's experience for materials cutting is different from the real cutting results and also different from the error size of yield in degree of worker's skill. Recently, a few of domestic shoes' makers make use of oversee's nesting software. But the nesting software unfits for the domestic actual circumstances, and is complex to use, and is expensive, and is not to be interfaced with the auto cutting machine. Therefore, we have developed the economic nesting systems that are easier for novice to use and fit for the domestic circumstances, which can syncronize with the development of the auto cutting machine. The system comprises interrelated modules for materials information, nesting simulation, utility. The architecture of system, the functions of each module, and the information processing procedures of each function are discussed.

• 한국주거학회논문집
• /
• 제14권1호
• /
• pp.1-10
• /
• 2003

The purpose of this study is to analyze patterns of space use and housing preferences to be used in the housing plan for students. Data was collected through questionnaire surveys from local university students living apart from their family. We collected 272 samples and analyzed them using SPSSwin program. The results are as follows; 1) The average hours of staying at the housing for student are 5 hours and 30 minutes(except sleeping time). Most of the time was used for ‘hobby’ and ‘study\ulcorner computer works’. The most of the students had ‘a meal per day’ at their housing. 2) The most preferred housing type by the students is ‘studio apartment’ and the next preferred is ‘apartment’. The highly demanded facility is ‘laundry’ and the next comes ‘kitchen’. 3) Those who spend more time in their housing than average show higher demand in ‘kitchen’ and ‘balcony’. Those who spend less time in their housing show higher demand in ‘storage’.

• 한국환경과학회지
• /
• 제9권1호
• /
• pp.27-33
• /
• 2000

The purpose of this paper is to present the environment change of Cheju Island as land development process using GSIS(Geo-Spatial Information System) technique. We implemented the process based on the maps of soil color, underground water pollution points, land use, land development planning and land sight seeing supported by Cheju Province Office. To use the maps for GSIS data, first we transformed the picture data of the office into raster structured picture data using scanner. Second, the coordinate system was added to raster data using 1/50000 geographic map. Third, we estimated land planning process using GSIS technique(overlay and reclass technique). The results showed that land development effected the natural environment(forest, green field, farm land). However, the chemical pollution and land sight seeing was not so much effected by the land development that was found.

• 한국산업정보학회논문지
• /
• 제1권1호
• /
• pp.203-217
• /
• 1996

This paper is to describe the development of nesting software for the materials cutting plan of footwear manufacturing processes. In shoes cutting process, almost of the materials cutting plan is dependent upon worker's experience. Thus, thepattern nesting by worker's experience for materials cutting is different form the real cutting results and also different form the error size of yield in degree of worker's skill. Recently, a few of domestic shoes' makers make use of oversee's nesting software.But the nesting software unfits for the domestic actual circumstances , and is complex to use , and is expensive , and is not to be interfaced with the auto cutting machine. Therefore , we have developed the economic nesting systems that are easier for novice to use and fit for the domestic circumstances, which can synchronize with the development of the auto cutting machine. The system comprises interrelated modules for materials information, nesting simulation, utility. The architecture of system, the function of each module, and the information processing proceduresof each function are discussed.

• 한국전자거래학회:학술대회논문집
• /
• 한국전자거래학회 2003년도 종합학술대회 논문집
• /
• pp.178-183
• /
• 2003

Past commodities management concept that mean simple Management after goods purchase. Today, it developed to system that manages from purchasing plan to discard by Computer's development. But, kind of goods is very various from System Commodities to Spare Parts. Also, among use of goods, according to state, accounting operation should be associated but it is functionless real condition that can confirm uniformity goods availability actually. In this study, studied about plan that use Commodities Contents from purchase of goods to discard so that can do goods and accountant management.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 1996년도 추계 학술 발표회 발표논문집
• /
• pp.145-155
• /
• 1996

This paper is to describe the development of nesting software for, the materials cutting plan of footware manufacturing processes. In shoes cutting process, almost of the materials cutting plan is dependent upon worker's experience. Thus the pattern nesting by worker's experience for materials cutting is different form the real cutting results and also different from the error size of yield in degree of worker's skill. Recently, a few of domestic shoes makers use of oversee's nesting software. But the nesting software unfits for the domestic actual circumstances, and is complex to use, and is expensive, and is not to be interfaced with the auto cutting machine. Therefore, we have developed the economic nesting systems that are easier for novice to use and fit for the domestic circumstances , which can syncronize with the development of the auto cutting machine. The system comprises interrelated modules for materials information, nesting simulation, utility . The architecture of system, the functions of each module and the information processing procedures of each function are discussed.

• 건축역사연구
• /
• 제8권2호
• /
• pp.47-58
• /
• 1999

The purpose of this study is to analyze the historical and environmental background of the straight-line-shaped plan emerged in northeast region of China during the Qing dynasty. This raper is mainly based on the writings in Yeon-haeng-rok. The results are summarized as follows: First the necessity of a lot of sunshine due to the cold climate in that region made the people select the plan that rooms to be added side by side. Second, it was not necessary to build the house with non-straight-line-shaped plan due to the reason that the northeast region of China is so vast and the size of the house lot was not limited. Third, the condition of family income somewhat affect the shape of plan to be straight-line-shaped, which is much economical to construct a house than other shape of plan. Fourth, the way of living of the people in that region during the Qing dynasty made the house plan straight-line-shaped which is convenient to sit either on the floor or on the chair within a room. Fifth, straight-line-shaped plan became an adequate means to represent the hierarchy of the use of inner space of a house and eventually became an architectural norm of this region.