• Journal of Korean Elementary Science Education
• /
• v.23 no.4
• /
• pp.287-296
• /
• 2004

The purposes of this study were to analyze the problems of elementary science instruction, especially in experiment and observation, and suggest the directions to improve current elementary science instruction in terms of teaching methods and strategies. Data from instructions implemented by 7 elementary teachers were used to extract the problem of elementary science instruction. According to the results of instruction observation, such problems as follows are identified: 1) shortage of discussion regarding results of students' activities, 2) insufficiency of interactions among teacher-student/student-student, 3) shortage of guidance for students on observation, 4) absence of explanation on apparatus, 5) teachers' insufficient knowledge on science, 6) inappropriate use of teacher-made worksheets. Desirable directions for the improvement of present elementary science instruction were proposed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.1
• /
• pp.108-115
• /
• 2000

This study was designed to compare the effect of polishing on surface roughness of composite resin. We used Z100(3M) composite resin and placed the composite resin in the hole (4mm thick and 4mm in diameter) of vinyl plate and polymerized it under manufacturer's instructions. Samples were divided into 5 groups by polishing methods. Group 1 was control: resin was polymerized under glass plate, Group 2: resin was polymerized without any polishing procedure, Group 3: resin was polymerized with a polishing procedure of abrasive disc, Group 4: bonding agent was applyed in thin layer and polymerized on the polished polymerized resin surface. Group 5: resin was polymerized under transparent celluloid strip. The surface roughness of each specimen was measured with Sufacoder SEF-30D (Kosaka lab. Ltd) under 0.08mm cut off, 0.05mm/s stylus speed, ${\times}40$ horizontal magnification, ${\times}5000$ vertical magnification. The results were as follows : 1. Group 1 showed the most smooth surface in this study. 2. Group 3 showed more rough surface than Group 2. Considering the surface roughness, it would be better to make the shape completely before polymerize the resin. To finish and polish after the polymerization of resin makes less smooth surface. 3. When we use the transparent celluloid strip, minimum finishing procedures are recommended. Any polishing procedure could not recover the smooth resin surface of celluloid strip. 4. Application and polymerization of the thin layer of bonding agent on the polished surface showed the minimum surface smoothing effect.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.229-235
• /
• 2018

As of in the year of 2016, 40 million ARM processors are being shipped everyday and more than 86 billion ARM processors are mounted in mobile communications, consumer electronics, enterprises, and embedded systems. Nationally, we are capable of designing high-end memory semiconductors, but not in processors, resulting in unbalance. Generally, highly expensive software programs are necessary for designing processors which makes it difficult to set up proper environments. However, ModelSim simulator provided by Altera is free and everybody can use it. In this paper, the VHDL language which is widely used in Europe, universities, and research centers around the world for the ASIC design is selected for designing 32-bit ARM processor and simulated by ModelSim. As a result, 37 instructions of ARMv4 has been successfully executed.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.2
• /
• pp.148-154
• /
• 2015

Computer aided process planning (CAPP) keeps an important role between the design and manufacturing engineering processes. A CAPP system is a digital link between a computer aided design (CAD) model and manufacturing instructions. CAPP have been researched and applied in manufacturing filed, however, one manufacturing area where CAPP has not been extensively researched is rapid prototyping (RP). RP is a technique for creating directly a three dimensional CAD data into a physical prototype. RP enables to build physical models automatically and to use to reduce the time for the product development cycle as well as to improve the final quality of the designed product. Three-dimensional (3D) printing is one kind of RP that creates three-dimensional objects from CAD models. The paper presents a computer aided process planning system for printing medical products. 3D printing has been used to solve complex medical problems such as surgical instruments, bioengineered products, medical implants, and surgical guides.

• Journal of Arbitration Studies
• /
• v.16 no.2
• /
• pp.213-238
• /
• 2006

Deferred payment letter of credit is the L/C that makes the issuing bank to pay a beneficiary at maturity stipulated in the credit. In this deferred payment letter of credit transaction, is it possible that a confirming or nominating bank payor negotiate before maturity? and the confirming or nominating bank have legal protection when paid or negotiated before maturity? These problems are raised in argument. By the way, Korea, Switzerland, Germany, and Italy are positive on the above question, but France, United Kingdom, and Singapore are negative. Therefore, when using deferred payment letter of credit, it is required to keep in mind that the understanding of maturity stipulated in the credit is different among countries, legal principles of each nations, and researchers. And other problems are raised also as follows; the application of Fraud Rule and principle of independence and abstraction as nature of credit, when to pay credit amount to beneficiary, and refusal of payment due to poor quality. Finally, it is required to use deferred payment letter of credit, after full understanding of deferred payment letter of credit pointed out in this paper.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.24 no.1
• /
• pp.60-71
• /
• 2017

Purpose: The purpose of this study was to develop video assisted education on bowel preparation for colonoscopy (VEBPC) and use a snartphone to evaluate effects of the VEBPC. Methods: Adult patients who were scheduled for colonoscopy were recruited from a university general hospital and randomly assigned to three groups. Group 1 (n=30) watched the video using a computer set in the endoscope consulting room. Group 2 (n=29) watched it using a smartphone, and group 3, the control group (n=29) received education with existing instructions at the reservation-reception desk. Participants were evaluated on knowledge on taking bowel preparation agents and diet, compliance on taking bowel preparation agents and diet, satisfaction with education, and actual level of bowel preparation. Results: Group 1 and 2 showed significantly (p<.001) higher scores for knowledge, compliance, and satisfaction compared to the control group. However, in post-hoc test analyses there were no significant differences in these variables between group 1 and 2. No significant difference was found in the actual level of bowel preparation among the three groups. Conclusion: Findings from this study show that VEBPC using smartphone is a better option than existing educational methods. However, replication studies are necessary to confirm these findings.

• Journal of KIBIM
• /
• v.7 no.4
• /
• pp.1-7
• /
• 2017

Since its beginning the military has continued updating its equipments and facilities by modernizing and expanding them. However, with rapidly growing technologies and business management skills, the time for military facilities' evolvement seems unavoidable. The Defense Installations Agency (DIA) has come to a conclusion that application of BIM is necessary. Since its decision, the DIA has been researching the use of BIM and developing guidelines for its application. Nevertheless, the speed of instructions and practical implementation of its model have been behind its plan due to various reasons. To overcome its limitations, the DIA has come up with three-step-solution: basic experience, budgeting, and expansion. Due to numerous number of projects of BIM, it is almost impractical to implement all of them concurrently. The methodological approach of the research employs the Delphi survey method to quantitatively analyze qualitative information drawn from experts' opinions. By applying the Delphi survey method, the first round of the survey drew lists of constraints, BIM application scenarios as well as BIM promotion measures. Afterwards, at the second round of the survey, criticality of each item collected at the 1st round was analyzed to reach a conclusion. Finally, constraints against BIM application were analyzed, and BIM application scenarios and promotion measures for the BIM were introduced.

• The Journal of Korean Physical Therapy
• /
• v.27 no.2
• /
• pp.112-117
• /
• 2015

Purpose: The purpose of this study was to examine the effects of a task-specific obstacle crossing rehabilitation program on functional gait ability in patients with cerebellar ataxia. Overall, we sought to provide ataxia-specific locomotor rehabilitation guidelines for use in clinical practice based on quantitative evidence using relevant analysis of gait kinematics including valid clinical tests. Methods: Patients with cerebellar disease (n=13) participated in obstacle crossing training focusing on maintenance of dynamic balance and posture, stable transferring of body weight, and production of coordinated limb movements for 8 weeks, 2 times per week, 90 minutes per session. Throughout the training of body weight transfer, the instructions emphasized conscious perception and control of the center of body stability, trunk and limb alignment, and stepping kinematics during the practice of each walking phase. Results: According to the results, compared with pre-training data, foot clearance, pre-&post-obstacle distance, delay time, and total obstacle crossing time were increased after intervention. In addition, body COM measures indicated that body sway and movement variability, therefore posture stability during obstacle crossing, showed improvement after training. Based on these results, body sway was reduced and stepping pattern became more consistent during obstacle crossing gait after participation in patients with cerebellar ataxia. Conclusion: Findings of this study suggest that task-relevant obstacle crossing training may have a beneficial effect on recovery of functional gait ability in patients with cerebellar disease.

• The Journal of Korean Physical Therapy
• /
• v.27 no.2
• /
• pp.81-84
• /
• 2015

Purpose: The purpose of this study was to compare the effect of 'knowledge of result' and 'knowledge of performance', two types of extrinsic feedbacks, during the sit-to-stand movement in children with hemiplegic cerebral palsy. Methods: A total of ten children with hemiplegic cerebral palsy (ages 8 to 12 years) were recruited for the study. Subjects with hemiplegic cerebral palsy performed sit-to-stand movement in front of a mirror. Their performance was supervised and revised for normal movement by a pediatric physiotherapist. In the knowledge of the result, subjects performed sit-to-stand using a chair with an armrest in their mind with normal movement. In the knowledge of performance, subjects performed sit-to-stand under verbal instructions. Randomized cross over trials were used in this study. Main outcome measurements were as follows: mediolateral speed, anteroposterior speed, velocity moment, extent in mediolateral direction, extent in anteroposterior direction, and vertical distance of the center of pressure. Results: The mediolateral speed and extent of center of pressure was higher for 'knowledge of performance' in comparison with the other type of extrinsic feedbacks (p<0.05). The other parameters, including anteroposterior speed and extent, and vertical speed of the center of pressure, did not differ between the two types of extrinsic feedbacks (p>0.05). Conclusion: These findings suggested that training in sit-to-stand movement with 'knowledge of result' may result in better use of extrinsic feedback.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.1
• /
• pp.40-45
• /
• 2004

This paper presents the parallel distributed control scheme for shaping of the bent glass. The designed system consists of a PC, a main controller and 11 servo-controllers, the precision motion controllers. Each elements are connected by using RS-232C and 8-bit data bus. In order to guarantee the stability and the control performance, we use a precision PID motion controller and a H-bridge on the servo-drivers. PC calculates position values of 11 DC motors by using the pre-determined curvature value and offers the user interface environment operator. The main controller provides the control instructions and parameter values to 11 servo-controllers by chip enable signal, simultaneously. Using the received commands and parameter values, the servo-controllers control the positions of the DC motors based on PID control scheme.