• Structural Engineering and Mechanics
• /
• v.41 no.4
• /
• pp.509-525
• /
• 2012

In recent years, CFRP material usage in strengthening applications gradually became widespread. Especially, the studies on the strengthening of shear deficient reinforced concrete beams with CFRP strips are chosen as a subject to numerous experimental studies and research on this subject are increased rapidly. The most important variable, that is affected on the failure mode of CFRP strips and that is needed for determining the shear capacity of the strengthened reinforced concrete beams, is the strain distribution between CFRP strips and concrete. Numerous experimental studies are encountered in the literature about the determination of strain distribution between CFRP strips and concrete. However, these studies mainly focused on the CFRP strips under axial tension. There are very limited numbers of experimental and analytic studies examining the strain distribution between concrete and CFRP strips, which are under combined stresses due to the effects of shear force and bending moment. For this reason, existing experimental study in the literature is used as model for ANSYS finite element software. Nonlinear finite element analysis of RC beams strengthened against shear with CFRP strips under reverse cyclic loading is performed. The strain distributions between CFRP strips and concrete that is obtained from finite element analysis are compared with the results of experimental measurements. It is seen that the experimental results are consisted with the results derived from the finite element analysis and important findings on the strain distribution profile are reached by obtaining strain values of many points using finite element method.

• International Journal of High-Rise Buildings
• /
• v.2 no.4
• /
• pp.345-354
• /
• 2013

This paper presents an advanced engineering technique using finite element analysis to improve structural silicone glazing (SSG) design in high-performance curtain wall systems for building facade. High wind pressures often result in bulky SSG aluminum extrusion profile dimensions. Architectural desire for aesthetically slender curtain wall sight-lines and reduction in aluminum usage led to optimization of structural silicone bite geometry for improved stress distribution through use of finite element analysis of the hyperelastic silicone models. This advanced design technique compared to traditional SSG design highlights differences in stress distribution contours in the silicone sealant. Simplified structural engineering per the traditional SSG design method lacks accurate forecasting of material and stress optimization, as shown in the advanced analysis and design. Full scale physical specimens were tested to verify design capacity in addition to correlate physical test results with the theoretical simulation to provide confidence of the model. This design technique will introduce significant engineering advancement to the curtain wall industry and building facade.

• Journal of Ginseng Research
• /
• v.42 no.3
• /
• pp.334-342
• /
• 2018

Background: Panax notoginseng is a highly valued medicine and functional food, whose quality is considered to be influenced by the size, botanical parts, and growth environments. Methods: In this study, a HPLC method integrating fingerprinting and determination of multiconstituents by single reference standard was established and adopted to investigate the chemical profiles and active constituent contents of 215 notoginseng samples with different sizes, from different botanical parts and geographical regions. Results: Chemical differences among main root, branch root, and rotten root were not distinct, while rhizome and fibrous root could be discriminated from other parts. The notoginseng samples from Wenshan Autonomous Prefecture and cities nearby were similar, whereas samples from cities far away were not. The contents of major active constituents in main root did not correlate with the market price. Conclusion: This study provided comprehensive chemical evidence for the rational usage of different parts, sizes, and growth regions of notoginseng in practice.

• Microbiology and Biotechnology Letters
• /
• v.48 no.2
• /
• pp.138-147
• /
• 2020

Various microorganisms play important roles in food fermentation, food spoilage, and agriculture. In this study, the biotype of 54 yeast and bacterial strains having high potential for utilization in food and agriculture, including Candida spp., Lactobacillus spp., and Acetobacter spp., were characterized by matrix-assisted laser desorption/ionization time-of flight mass spectrometry (MALDI-TOF MS). This characterization using a fast and robust method provides much-needed information on the selected microorganisms and will facilitate effective usage of these strains in various applications. Importantly, the unique protein profile of each microbial species obtained from this study was used to create a database of fingerprints from these species. The database was validated using microbial strains of the same species by comparing the mass spectra with the created database through pattern matching. The created reference database provides crucial information and is useful for further utilization of a large number of valuable microorganisms relevant to food and agriculture.

• Proceedings of the KAIS Fall Conference
• /
• 2003.11a
• /
• pp.141-148
• /
• 2003

Customer retention is a common concern for many industries and a critical issue for the survival in today's greatly compressed marketplace. Current customer retention models only focus on detection of potential defectors based on the likelihood of defection by using demographic and customer profile information. In this paper, we propose a dynamic procedure for defection detection and prevention using past and current customer behavior by utilizing SOM and Markov chain. The basic idea originates from the observation that a customer has a tendency to change his behavior (i.e. trim-out his usage volumes) before his eventual withdrawal. This gradual pulling out process offers the company the opportunity to detect the defection signals. With this approach, we have two significant benefits compared with existing defection detection studies. First, our procedure can predict when the potential defectors could withdraw and this feature helps to give marketing managers ample lead-time for preparing defection prevention plans. The second benefit is that our approach can provide a procedure for not only defection detection but also defection prevention, which could suggest the desirable behavior state for the next period so as to lower the likelihood of defection. We applied our dynamic procedure for defection detection and prevention to the online gaming industry. Our suggested procedure could predict potential defectors without deterioration of prediction accuracy compared to that of the MLP neural network and DT.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.445-450
• /
• 1997

Self-Powered Neutron Detectors(SPNDs) are currently used to estimate the power generation distribution and fuel burn-up in several nuclear power reactors in Korea. In this paper, Monte Carlo simulation is accomplished to calculate the escape probability of beta particle as a function of their birth position fur the typical geometry of rhodium-based SPNDs. Also, a simple numerical method calculates the initial generation rate of beta particles and the change of generation rate due to rhodium burn-up. Using the simulation and the numerical method, the burn-up profile of rhodium density and the neutron sensitivity are calculated as a function of burn-up time in the reactor. The sensitivity of the SPNDs decreases non-linearly due to the high absorption cross-section and the non-uniform burn-up of rhodium in the emitter rod. In addition, for improvement of some properties of rhodium-based SPNDs which are currently used, this paper presents a new material. The method used here can be applied to the analysis of other types of SPNDs and will be useful in the optimum design of new SPNDs for long term usage.

• Journal of Korean Foot and Ankle Society
• /
• v.27 no.3
• /
• pp.103-107
• /
• 2023

Quinolone antibiotics are frequently prescribed for suspected respiratory or urinary tract infections because of their effectiveness and generally perceived safety profile. On the other hand, some studies have raised concerns regarding the potential association between quinolone use and Achilles tendinopathy or tendon rupture. There is a lack of reports on the link between quinolone use and multiple tendon and tendon attachment site pain in the foot and ankle joints; hence, this study examined this issue further. This paper presents a case report of a patient with persistent Achilles tendinopathy and multiple tendon and tendon attachment site pain in the foot who did not respond adequately to conservative treatments. In particular, the discontinuation of quinolone use resulted in favorable clinical outcomes. This report offers valuable insights into the potential risks associated with quinolone antibiotics and highlights the importance of vigilance when managing patients with tendon-related complaints. A comprehensive review of the relevant literature is also presented to contextualize these findings.

• Journal of Internet Computing and Services
• /
• v.21 no.4
• /
• pp.87-95
• /
• 2020

The Science and Technology Information Service provided by the Korea Institute of Science and Technology Information (KISTI) is a service designed to allow users to easily and conveniently search and view content that is built similar to the general information service. NDSL is KISTI's core science, technology and information service, providing about 138 million content and having about 93 million page views in a year of 2019. In this paper, various insights were derived through the analysis of how science and technology information such as academic papers, reports and patents provided by NDSL is searched and utilized through web services (https://www.ndsl.kr) and search query words. In addition to general statistics such as the status of content construction, utilization status and utilization methods by type of content, monthly/weekly/time-of-day content usage, content view rate per one-time search by content type, the comparison of the use status of academic papers by year, the relationship between the utilization of domestic academic papers and the KCI index we analyzed the usability of each content type, such as academic papers and patents. We analyzed query words such as the language form of query words, the number of words of query words, and the relationship between query words and timeliness by content type. Based on the results of these analyses, we would like to propose ways to improve the service. We suggest that NDSL improvements include ways to dynamically reflect the results of content utilization behavior in the search results rankings, to extend query and to establish profile information through non-login user identification for targeted services.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.217-220
• /
• 2004

According as utilization for web increases rapidly, it is demanded that model about support interaction between web-based applications systematically and solutions can integrate new distributed platforms and existing environment effectively, accordingly, Web Services appeared by solution in reply. These days, a lot of software and hardware companies try to adoption of Web Services to their market, attenpt to construct their applications associationing components from various Web Services providers. However, to execute Web Services completely. it must have interoperability and need the standardization work that avoid thing which is subject to platform, application as well as service and programming language from other companies. WS-I (Web Services Interoperability organization) have established Basic Profile 1.0 based on XML, UDDI, WSDL and SOAP for web services interoperability and developed usage scenario Profile to apply Web Services in practice. In this paper, to verify suitability Web Services interoperability between heterogeneous two applications, have design and implements the Book Information Web Services that based on the Web Services Client of J2SE platform and the Web Services Server of .NET platform, so that analysis and verify the service by adaptation of WS-I Basic Profile.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.685-688
• /
• 2008

Planar antennas are very efficient for the use of the out-door data transmission applications due to their low-profile characteristics. But the size of the antenna in UHF band blocks the practical usage. In this paper, a miniaturized planar antenna is investigated for the application of AMR system in UHF band. The designed antenna is fabricated in the form of the microstrip patch on the FR-4 substrate. The miniaturization is achieved by slot-loading on the patch. First, effects of simple slots on the size reduction are analyzed, followed by the design using more complex slots resulting in the reduction ratio of 37.9% in 425.6 MHz and bandwidth of 3.8 MHz. The effect of epoxy coating for the protection is also investigated.