• Journal of the Korea Concrete Institute
• /
• v.27 no.1
• /
• pp.29-35
• /
• 2015

Recent studies to develop Very Large Floating Structure(VLFS) has shown that the construction procedure of the structure needs to acquire precast concrete module connection system using prestressing. However, the loads occurring on water are complex combinations of various condition, so the safe and stable performance of the module joints and bonding materials are key to the success of the construction. Therefore, micro-silica mixed aqua-epoxy development was introduced in Part 1 using a bonding material developed in this study. The performance of the micro-silica mixed aqua-epoxy(MSAE) applied joint of concrete module specimens connected by prestressing tendon was evaluated to verify the usability and safety of the material. RC beam, spliced beam connected by prestressing tendon and MSAE, and continuous prestressed concrete beam were tested for their initial cracking and maximum loads as well as cracking procedure and pattern. The results showed that the MSAE can control the stress concentration effect of the shear key and the crack propagation, and the maximum load capacity of MSAE joint specimens are only 5% less than that of continuous RC specimen. The details of the study are discussed in detail in the paper.

• Journal of the Korean Society of Radiology
• /
• v.14 no.5
• /
• pp.677-684
• /
• 2020

Miscentering in the left and right X axis direction during CT examination affects dose and quality. When the CT Gantry Isocenter and the center of the examination objective are matched using the Lateral Sliding Table, the image quality is improved and the exposure dose is reduced. CTDI Head Phantom (Kimda, Korea) and dosimeter (Ray Safe, Sweden) were used to measure dose comparison CTDI (mGy) due to center deviation, and Water Phantom (HITACHI, Japan) was used to measure noise to see the difference in uniformity due to center deviation. Measurements of doses for dose comparison CTDI (mGy) with a deviation showed that doses were consistently reduced and exact dose was not projected until they were moved to 80 mm by 20 mm from the Isocenter. SD values were measured to see the difference in uniformity due to center deviation and the noise continued to increase until it was moved by 20 mm to 80 mm. The range of collimation has increased by the extent of deviating from the center and the range of exposure has increased. Using the Lateral Sliding Table, you can easily adjust the Isocenter, increase the quality of the image by adjusting the Isocenter in areaa such as the cardiac examination of the location away from the Isocenter, Extreme bone and Shoulder, and greatly reduce the collimation to the Isocenter, so it can be used to reduce unnecessary exposure dose.

• The Journal of Korean Society for Radiation Therapy
• /
• v.22 no.2
• /
• pp.85-95
• /
• 2010

Purpose: The degradation of an image quality and error of the beam dose calculation can be caused because the metal artifact is generated during the CT simulation of head and neck patient. The usability of the gantry tilt scan for reducing the metal artifact tries to be appraised. Materials and Methods: The inferior $20^{\circ}$ gantry tilt scan was made in order to reduce the metal artifact and $0^{\circ}$ reconstruction image was acquired. The AAPM CT performance Phantom was used in order to compare the CT number of the reconstructed image and Original image. the difference of volume was compared by using the acrylic phantom. The homogeneity of the CT number was evaluated the Intensity volume Histogram (IVH) as in order to evaluate an influence by the metal artifact. A dose was evaluated as the Dose Volume Histogram (DVH). Results: in the comparison of the CT number and volume, the difference showed up less than 0.5%. As to the comparison of IVH, in the gantry tilt scan, influence by an artifact was reduced and the homogeneity of the CT number was improved. The comparison of DVH result reduced the mean dose error of the both sides parotid 0.2~6%. Conclusion: In the Head & Neck radiation therapy, It is difficult and to distinguish tumor and normal tissue and the error of dose is generated by the metal artifact. The delineation of the exact organization was possible if the Gantry tilt scan was used. The CT number homogeneity was improved and the error of dose could be reduced. The Gantry tilt scan confirmed in the Head & Neck radiation therapy to be very useful in the exact radiation therapy.

• Korean Journal of Digital Imaging in Medicine
• /
• v.16 no.2
• /
• pp.15-24
• /
• 2014

Currently commercially available phantom can reproduce and evaluate only a static situation, the study is incomplete research on phantom and system which is can confirmed functional situation in the kidney by time through dynamic phantom and blood flow velocity, various difference according to the amount of radioactive. Therefore, through this study, it has produced the dynamic kidney phantom to reproduce images through the dynamic flow of the kidney, it desires to evaluate the usefulness of nuclear medicine imaging. The production of the kidney phantom was fabricated based on the normal adult kidney, in order to reproduce the dynamic situation based on the fabricated kidney phantom, in this study it was applied the volume pump that can adjust the speed of blood flow, so it can be integrated continuously radioactive isotopes in the kidney by using 99mTc-pertechnate. Used the radioactive isotope was supplied through the two pump. It was confirmed the changes according to the infusion rate, radioactive isotopes and the different injection speeds on the left and right, analysis of the acquired images was done by drawn five times ROI in order to check the reproducibility of each on the front and rear of the kidney and bladder. Depending on the speed of injection, radioisotope was a lot of integrated and emissions up when adjusting the pressure of the pump as 30 stroke, it was the least integrated and emissions up when adjusting as 40 stroke. The integration of the left & right kidney was not reached in the amount of the highest when adjusting as 10 stroke. In the changes according to the amount of the radioactive isotope, 0.6 mCi(22.2 MBq), 0.8 mCi (29.6 MBq)was showed up similar tendency but, in the result of the injection 0.8 mCi, it was showed up counts close to double of 0.6 mCi. In the result of the differently injection speed of the left & right kidney, as a result of different conditions that injection speed was 20 stroke through left kidney phantom, the injection speed was 30 stroke through right kidney phantom, it was enough difference in the resulting image can be easily distinguished with the naked eye. Through this study, the results showed that the dynamic kidney phantom system is able to similarly reproduce renogram in the actual clinical. Especially, the depicted over time for the flow to be excreted through the kidney into the bladder was adequately reproduce, it is expected to be utilized as basic data to check the quality of the dynamic images. In addition, it is considered to help in the field of functional imaging and quality control.

• Journal of Internet Computing and Services
• /
• v.15 no.4
• /
• pp.21-31
• /
• 2014

As the protein drug industry is growing, protein informations are indispensable for the protein drug development. NCBI and PDB in the U.S., the EMBL in Europe and the DDBJ in Japan are the representative centers for bio information and each center provides specific data for protein information. To obtain specific protein information, users are to be collect them from the service sites of each center and then combine or analyze for their purpose. To facilitate the accessibility to bio data, various R&D activities are running for development of diverse web services relevant to bio data in major data centers or small-scale projects. With the recognition of protein information as pivotal for the protein drug development, DrugBank in Canada, GDSC in the U.S. start to provide integrated informations between drugs and proteins. However, those service does not meet users' demands due to lack of diversity. In Korea, infra structures for bioinformatics are limited and the current services for protein drug information are providing only basic information of the drug including distribution data. This is a pilot study to construct a specialized service for protein drug information in Korean style breaking through the limitations of current services. This study proposed new fields for protein characterization information which had not been provided by current services and evaluated their effectiveness and usability by comparing them to the existing fields with expert survey. As a result, the newly proposed fields for protein characterization have been proven to be useful data fields for the service of protein drug information.

• Journal of Digital Convergence
• /
• v.13 no.9
• /
• pp.439-444
• /
• 2015

This study analyzes the chicken-related prescription shown in the literature summarized by standing tradition deliberate aims to investigate the clinical efficacy of native chickens. Therefore, The old traditional medicine books of native chickens translate and organize the relevant prescriptions. The manuscript old documents is prescribed by the old central documents sourced directly from generation to generation descendants technical publishing contemporary situation sake of the development of this unique formulation not only contemporary who established himself through numerous trials and errors. Browse almost circular in traditional medicine prescription, which is scattered throughout the country is difficult, and because of the loss can not be confirmed even its existence. This study is to establish the analysis and separated by organized to establish a database on the basis of prescription and mixed herbs in a variety of functional foods developed through usability evaluation methods of treatment. Therefore, the management systems of native chickens related to lack of knowledge and information to foster the continued expansion and specialized training and knowledge of the future growth engine industry through the added value of cultural projects of national knowledge resources. Finally, convergence research and evaluate the usefulness of native chickens through interdisciplinary research systems, and practical measures of functional foods and alternative medicine are presented as well.

• Food Science and Preservation
• /
• v.20 no.1
• /
• pp.37-44
• /
• 2013

To investigate the usability of the bitterns produced during salt manufacture, the characteristics of soybean curds coagulated with bitterns like solar salt bitterns (SSB), dehydrated salt bitterns (DSB), concentrated sea water (CSW) and bitterns produced during the storage of solar salt (BSS) were measured. The Mg contents of all the bitterns were the same, but the Na content of the BSS was 1.0-2.0 times as high as that of the other bitterns. The yield of the soybean curds did not differ with the addition of coagulants, except for the CSW. However, the soybean curds were acquired in large quantities by the DSB and CSW. The mg and Na contents of the soybean curds that were made with the bitterns were higher than those of $MgCl_2$. The heavy metals were below 3 ppm in the curds, especially those produced by the CSW, but Pb was not detected. Among the mechanical characteristics of the soybean curds, their adhesiveness was not affected by the coagulants, but the mechanical hardness of the curds produced by the DSB and CSW was lower. The sensory evaluation showed that the curds that were produced by the bitterns were more highly preferred than those produced by $MgCl_2$. In particular, the soybean curd that was made with the CSW was favored due to its soft texture. The results of this study, particularly the high yield of the curds that showed a soft texture, showed that the bitterns, especially the CSW, could be used safely and economically.

• Journal of The Korean Association of Information Education
• /
• v.14 no.3
• /
• pp.291-300
• /
• 2010

Group-based learning is known to be an effective means to improve scholastic achievement in online learning. Therefore, there are some previous researches for the group-based learning. A lot of previous researches define factors for grouping from the characteristics of classes, teacher's decision and students' preferences and then generate a group based on the defined factors. However, many algorithms proposed by previous researches depend on a specific class and is not a general approach since there exist several differences in terms of the need of courses, learners, and teachers. Moreover it is hard to find a automatic system for group generation. This paper proposes a grouping system which automatically generate a learner group according to characteristics of various classes. the proposed system automatically generates a learner group by using basic information for a class or additional factors inputted from a user. The proposed system defines a set of rules for learner grouping which enables automatic selection of a learner grouping algorithm tailored to the characteristics of a given class. This rule based approach allows the proposed system to accommodate various learner grouping algorithms for a later use. Also we show the usability of our system by serviceability evaluation.

• Journal of the Korea Society for Simulation
• /
• v.16 no.1
• /
• pp.11-19
• /
• 2007

Under ubiquitous environment, applications can gather and utilize various sensing information. There are many issues such as energy management, protocol standardization, independency on sensor fields, and security to be resolved for the complete ubiquitous computing. Especially, the independent information access in the sensor field is one of the most important issues to maximize the usability of sensors in various sensor fields. However, existing frameworks are not suitable for the ubiquitous computing environment because of data heterogeneity between data elements in sensor fields. Existing applications are dependent to sensor fields and sensors in the existing ubiquitous computing on environment is dependent to the application in the sensor field. In other word, an application can utilize just information from a specific sensor field. To overcome this restriction, many issues from a hardware or software view must be resolved. In this paper, we provide the design and implementation of the Metadata Registry-based framework (UbiMDR) of the Ubiquitous environment. This framework can provides the semantic interoperability among ubiquitous applications or various sensor fields. In addition, we describe comparison evaluation between conventional Ubiquitous computing framework and UbiMDR framework with data accuracy of interoperability.

• The KIPS Transactions:PartD
• /
• v.16D no.5
• /
• pp.715-728
• /
• 2009

The Enterprise Service Bus based on Java Business Integration is an web service standard and one of the methods for implementing distribution channels of Service Oriented Architecture. Consisting of open source group, extensive venders and users, the ESB based JBI has the problems of ineffectiveness as well as advantages of extensibility of service plug-in. That is, in case users need to use Service plug-in, manual connection of packaging process and sequential distribution method is required. This study, therefore, proposes as a way of trouble-shooting the user-oriented component deployment tool which can manage entire process for deploying The ESB middleware platform to Service unit. At the same time, this study elicited the requirements based on issues of JBI-based ESB and has developed the modeling property, packaging, distribution and evaluation thru Schema analysis of JBI-compatible component. Using the deployment tool this study proposed, users will be able to perform and manage the whole deploying process without additional manual work for connecting component. Not only it is expected that interface based on Graphic User Interface provide usability and convenience but they can also minimize the errors rate through component and route validity verification function provided in deployment tool.