• Journal of the Korean Ceramic Society
• /
• v.29 no.8
• /
• pp.667-673
• /
• 1992

The alumina-zirconia composite powders of core particle ZrO2 coated with Al2O3 were prepared by the hydrolysis-deposition of the mixed aluminum salt solution of Al2(SO4)3-Al(NO3)3-Urea. The effects of hydrolysis reaction and coating parameters on characteristics of coated powders and composites were also investigated. The degree of coating could be estimated from the ratio of tetra-/mono-ZrO2 present at the room temperature after heat-treating coated powders at 120$0^{\circ}C$ and the result of TEM observations. When the content of ZrO2 in the dispersed coating system, the coating time, and the volume ratio of water/solution were 50 mg/g, 180 min, and 5, respectively the coating efficiency was maximum (the ratio of tetra-/mono-ZrO2 was 87/13). The relative densities of coated Al2O3-ZrO2 composites sintered at 1$650^{\circ}C$ for 4 hrs were about 91~98% and the maximum ratio of tetra-/mono-ZrO2 in Al2O3-20wt% ZrO2 composites was 62/38.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.10
• /
• pp.67-78
• /
• 2019

The efficiency of suppressing fine dust was evaluated by conducting indoor and field experiments for the ground treated with EICP solution, which is an eco-friendly ground improvement method. In laboratory experiments, the EICP solution was prepared with inexpensive materials for the field applicability, and the optimal mixing ratio and optimal spraying volume of EICP solution were calculated. The optimum amount of calcium carbonate was shown when the ratio of urea/calcium chloride and white powder were 1.5 and 15 g/L, respectively. The optimum spraying amount of the EICP solution was $7L/m^2$ determined by fine dust suppression and cone tip resistance experiments. The spraying of water and EICP solution was conducted at the test-bed where dump trucks pass for the effect of suppressing fine dust of each method. The effective fine dust suppression method can be chosen depending on the situation of the site.

• Journal of Korean Society on Water Environment
• /
• v.31 no.1
• /
• pp.42-48
• /
• 2015

This study focused on effective decomposition methods for low concentrated organic compounds from the reuse of industrial wastewater, and confirmed the possibility through photocatalyst media. Photocatalyst immobilized media was developed to carry on this experiment which confirmed the removal possibility of low concentrated organic compounds. Considering the stability and efficiency of photocatalyst immobilization, inorganic support, hollow bead, and $TiO_2$ nano powder were used. As a result of the removal experiment, the removal efficiencies of acetonitrile, ethanol, IPA(Isopropyl alcohol), methanol were above 75% after 15 minutes while those of acetone, acetaldehyde, urea were 10%, 45%, 20%, respectively after 60 minutes. If further studies were made to increase the surface area of the photocatalyst immobilized media, the efficiency of the removal of low concentrated organic compounds can be improved and this solution can also be used in an actual treatment process.

• Textile Coloration and Finishing
• /
• v.21 no.4
• /
• pp.39-45
• /
• 2009

PVA films were crosslinked with dimethylol dihydroxy ethylene urea (DMDHEU) and three polycarboxylic acids of butanetetracarboxylic acid (BTCA), citric acid and malic acid Different factors influencing the crosslinking treatment with BTCA were investigated including BTCA and sodium hypophosphite (SHP) concentration, curing temperature and time. The cured films was extracted with boiling water and gel fraction was calculated based on weight change of the PVA films. The gel fraction of PVA films increased with increasing curing temperature and time. And the resistance to water and thermal stability of the crosslinked PVA films improved with the BTCA crosslinking treatment. While crosslinking with citric acid gave the highest gel fraction among the crosslinkers, crosslinking with malic acid showed the highest absorbancy in 0.9% saline solution, which was attributed to lower crosslink density and high number-average molecular weight between crosslinks. The superabsorbent PVA films could be prepared by adjusting the crosslinking condition of PVA with polycarboxilic acids.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.8
• /
• pp.1277-1284
• /
• 1999

Eight feeds and their residues left after washing with tap water (water residue) or incubation in the rumen (rumen residues) were treated with hydrochloric acid, neutral detergent solution without EDTA (NDS) or both, and the release or sorption of minerals (Ca, Mg, P, Na, K, Cu and Zn) assessed. Six of the feeds were from Sri Lanka (Panicum maximum ecotype Guinea A, Glyricidia maculate, Artocarpus heterophyllus (jak leaves), untreated and urea-treated rice straw, and rice bran) and two from the Netherlands (maize silage and wheat straw). The initial concentration of mineral elements, the concentration of neutral detergent fibre (NDF) and the type of feed significantly influenced (p<0.01). The proportion of the mineral elements released or sorbed. In general, feeds with high NDF content (straws and guinea grass) sorbed Ca from tap water, or released less in the rumen, and within these feeds the extent of sorption varied with source of fibre. Acid or NDS treatment removed little of the sorbed Ca, but they removed much of the Mg from both water and rumen residues. Fibres of wheat straw and jak leaves showed an affinity for Mg in the rumen. All feeds and their water and rumen residues sorbed P and Na from NDS, and the extent of sorption varied with the initial concentrations of these elements and with the type of fibre. Acid treatment removed part of the sorbed Na, but not the P. The solubility of K was not affected by the content of NDF, the type of fibre or the initial concentration of K. All feeds and their residues, except for the rumen residues of rice bran sorbed Cu from tap water and in the rumen. The recovery of Cu in rumen residues declined from 353% to 147% after NDS treatment, and with some feeds (glyricidia and jak leaves) the recovery was below 100%. Acid treatment removed part of the Zn sorbed by the water and rumen residues, but the capacity of residues to retain Zn varied with the type of feed.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.4
• /
• pp.260-266
• /
• 2008

Small lysimeter experiment under rain shelter plastic film house was conducted to investigate the effect of soil characteristics on the leaching and soil solution concentration of nitrate and phosphate. Three soils were obtained from different agricultural sites of Korea: Soil A (mesic family of Typic Dystrudepts), Soil B (mixed, mesic family of Typic Udifluvents), and Soil C (artificially disturbed soils under greenhouse). Organic-C contents were in the order of Soil C ($32.4g\;kg^{-1}$) > Soil B ($15.0g\;kg^{-1}$) > Soil A ($8.1g\;kg^{-1}$). Inorganic-N concentration also differed significantly among soils, decreasing in the order of Soil B > Soil C > Soil A. Degree of P saturation (DPS) of Soil C was 178%, about three and fifteen times of Soil B (38%) and Soil A (6%). Prior to treatment, soils in lysimeters (dia. 300 mm, soil length 450 mm) were tabilized by repeated drying and wetting procedures for two weeks. After urea at $150kg\;N\;ha^{-1}$ and $KH_2PO_4$ at $100kg\;P_2O_5\;ha^{-1}$ were applied on the surface of each soil, total volume of irrigation was 213 mm at seven occasions for 65 days. At 13, 25, 35, 37, and 65 days after treatment, soil solution was sampled using rhizosampler at 10, 20, and 30 cm depth and leachate was sampled by free drain out of lysimeter. The volume of leachate was the highest in Soil C, and followed by the order of Soils A and B, whereas the amount of leached nitrate had a reverse trend, i.e. Soil B > Soil A > Soil C. Soil A and B had a significant increase of the nitrate concentration of soil solution at depth of 10 cm after urea-N treatment, but Soil C did not. High nitrate mobility of Soil B, compared to other soils, is presumably due to relatively high clay content, which could induce high extraction of nitrate of soil matrix by anion exclusion effect and slow rate of water flow. Contrary to Soil B, high organic matter content of Soil C could be responsible for its low mobility of nitrate, inducing preferential flow by water-repellency and rapid immobilization of nitrate by a microbial community. Leached phosphate was detected in Soil C only, and continuously increased with increasing amount of leachate. The phosphate concentration of soil solution in Soil B was much lower than in Soil C, and Soil A was below detection limit ($0.01mg\;L^{-1}$), overall similar to the order of degree of P saturation of soils. Phosphate mobility, therefore, could be largely influenced by degree of P saturation of soils but connect with apparent leaching loss only more than any threshold of P accumulation.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.2
• /
• pp.155-165
• /
• 2018

The objective of the research was to evaluate the effect of particle pre-treatment on physical, mechanical, and durability of jatropha fruit hulls (JFH) particleboard. The pre-treatments included were immersing in cold water, hot water, and acetic acid solution. After each treatment, the particles were dried up to 3% moisture content. Urea-formaldehyde (UF) resin was used to fabricate particleboards with board size, thickness and density target of 25 cm by 25 cm, 0.80 cm, and $0.70g/cm^3$, respectively. Board pressed at $130^{\circ}C$ for 10 minutes, and $25kg/cm^2$ pressure. The evaluation of particleboard followed the JIS A 5908-2003. Whilist their resistance to subterranean termite test (mass loss, mortality, antifeedant value and feeding rate) refers to the Indonesian standard (SNI 01.7207-2006). The physical and mechanical properties of particleboards showed that all pre-treatments decreased the pH of particles. Overall, all particle immersing treatments resulted of better physical and mechanical properties of particleboard than those of untreated ones. The acetic acid treatment resulted the best physical and mechanical properties of particleboard. Based on the mass loss of JFH particleboard, hot water and acetic acid treated particleboards were classified into weak resistance to subterranean attack. The other two treatments were classified into very weak resistance. Hot water treated particleboard provided the highest mortality and antifeedant as much as 87.40% and 34.20%, respectively. Based on antifeedant classification, hot water treated particleboards were classified into moderately strong resistance, while other treatments were categorized into weak resistance. The lowest feeding rate value ($45.30{\mu}g/termite/day$) was attained by hot water treatment.

• Applied Biological Chemistry
• /
• v.22 no.2
• /
• pp.109-122
• /
• 1979

Present study was carried out to reduce residual toxicity of BHC insecticides inherent in the organochlorine pesticides. For This end, r-isomer, the most potent insecticidal component among the BHC stereoisomers, was isolated and thus fortified by means of solvent precipitation. In parallel, 3-(2,4,5-trichlorophenyl)-1-methyl urea was prepared in good yield from technical BHC via 1,2,4-trichlorobenzene, 1,2,4,-trichloronitrobenzene, and 2,4,5-trichloroaniline. In addition, certain merit of the compound which make it possible to use as a herbicide is discussed. The results are summarized as follows; 1. Recrystallizing technical BHC from methanol-water binary solvent system, r-isomer was enriched to 49.7% at 95% recovery of r-isomer. 2. By partitioning technical BHC in 85% of methanolic solution into chloroform, r-isomer was fortified to 89.6% at 90.5% recovery of r-isomer. 3. Yield of 1,2,4-trichlorobenzene from technical BHC was greatly dependent upon concentration of alkalies and to less degree on the alkalies. 4. Surfactants, in particular cationic a quartenary ammonium salt, increased yield of 1,2,4-trichlorobenzene from technical BHC by alkaline hydrolysis. 5. Conversion of 1,2,4-trichlorobenzene to 2,4,5-trichloronitrobenzene was effected almost quantitatively utilizing $HNO_3-H_2SO_4$ nitrating agent at low temperature. 6. Yield of 91.4% was observed for the synthesis of 2,4,5-trichloroaniline by reducing 2,4,5-trichloronitrobenzene in the presence of iron turning and hydrochloric acid. 7. Overall yield based on BHC of 3-(2,4,5-trichlorophenyl)-1- methyl urea was 60.8%. 8. Inhibition effects, both germination and growth, 3-(2,4,5-trichlorophenyl)-1-methyl urea on several crops were found comparable to or more potent than those of $linuron{\circledR}\;and\;diuron{\circledR}$. In addition, it was also noted that susceptibility to the prepared compound depended upon the crops as well as specific part (shoots, roots) of the plant exposed to the chemicals.

• YAKHAK HOEJI
• /
• v.36 no.6
• /
• pp.518-528
• /
• 1992

To determine the optimal conformation of sulfonylureas, the correlation between conformation and hypoglycemic activity of the two sulfonylureas of tolbutamide and chlorpropamide as hypoglycemic agent was studied using an empirical potential function (ECEPP/2) and the hydration shell model in the unhydrated and hydrated states. The conformational energy was minimized from several starting conformations with possible torsion angles in each molecule. The conformational entropy change of each conformation was computed using a harmonic approximation. To understand the hydration effect on the conformation of the molecules in aqueous solution, the contribution of water-accessible volume of each group or atom in the lowest-free-energy conformation was calculated and compared each other. From comparison of the computed lowest-free-energy conformations of two sulfonylureas, it could be suggested that the hydration of sulfonylurea moiety is related to increase the hypoglycemic activity. From the calculation results, it was known that the conformational entropy is the major contribution to stabilize the low-free-energy conformations of two sulfonylureas in unhydrated state. Whereas, in hydrated state, the hydration free energy largely contributes to the total free energies of low-free-energy conformations of tolbutamide and conformational entropy contributes to stabilize the low-free-energy conformations of chlorpropamide. The torsion angles from phenyl ring to urea moiety of the low-free-energy conformations of the two sulfonylureas were shown the nearly regular trend. On the basis of these results, the conformation exhibiting the optimal hypoglycemic activity of sulfonylureas and the binding direction to pancreatic receptor site A could be predicted. Also, according to the side chain lengthening of urea moiety, tolbutamide showed various conformational change. Therefore, steric effect may be important factor in the interaction between sulfonylureas and the putative pancreatic receptor.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.10
• /
• pp.1364-1373
• /
• 2012

Four crossbred (75% Holstein Friesian) lactating dairy cows, with an average live weight of $418{\pm}5$ kg and $36{\pm}10$ d in milk were randomly assigned according to a $2{\times}2$ factorial arrangement in a $4{\times}4$ Latin square design to evaluate the effects of cassava hay (CH) and rice bran oil (RBO) on feed intake, nutrient digestibility, ruminal fermentation, milk yield, and milk composition. Factor A was non-supplementation or supplementation with CH in the concentrate. Factor B was supplementation with RBO at 0% or 4% in the concentrate mixture. The four dietary treatments were (T1) control (Concentrate with non-CH plus 0% RBO; C), (T2) Concentrate with CH plus 0% RBO (CH), (T3) Concentrate with non-CH plus 4% RBO (RBO), and (T4) Concentrate with CH plus 4% RBO (CHRBO). The cows were offered concentrate, at a ratio of concentrate to milk production of 1:2, and urea-lime treated rice straw was fed ad libitum. Urea-lime treated rice straw involved 2.5 g urea and 2.5 g $Ca(OH)_2$ (purchased as hydrated lime) in 100 ml water, the relevant volume of solution was sprayed onto a 100 g air-dry (91% DM) straw, and then covering the stack with a plastic sheet for a minimum of 10 d before feeding directly to animals. The CH based concentrate resulted in significantly higher roughage intake and total DM intake expressed as a percentage of BW (p<0.05). Ruminal pH, $NH_3$-N, BUN and total VFA did not differ among treatments, while RBO supplementation increased propionate, but decreased acetate concentration (p<0.05). Furthermore, the population of total ruminal bacteria was significantly lower on the RBO diet (p<0.05). In contrast, the total ruminal bacteria and cellulolytic bacteria on the CH diet were higher than on the other treatments. Supplementation with CH increased (p<0.05) F. succinogens and R. flavefaciens populations, whereas the populations of B. fibrisolvens and M. elsdenii were increased on the RBO diet. In addition, supplementation with CH and RBO had no effect on milk production and composition in dairy cows, while fatty acid composition of milk was influenced by RBO supplementation, and resulted in significantly lower (p<0.05) concentrations of both short-chain and medium-chain FA, and increased (p<0.05) the proportion of long-chain FA in milk fat, as well as significantly increased cis-9, trans-11 CLA and total CLA. In conclusion, RBO or CH exhibited specific effects on DMI, rumen fermentation, microbial population, milk yield and composition in lactating dairy cows, which were not interactions between CH and RBO in the diets. Feeding lactating dairy cows with RBO could improve fatty acid in milk fat by increasing cis-9, trans-11 CLA.