• 한국토양비료학회지
• /
• 제16권3호
• /
• pp.223-227
• /
• 1983

볏짚퇴비(堆肥) 제조시(製造時) 염기치환용량(鹽基置渙容量)이 큰 Zeolite를 첨가(添加)하여 퇴적기간중(堆積期間中) 각종양분(各種養分)의 함량(含量) 및 퇴비성상(堆肥性狀)의 변화(變化)를 조사(調査)한 결과(結果)는 다음과 같다. 1. 퇴비(堆肥) 제조시(製造時) Zeolite를 첨가(添加)하여 줌으로써 무첨가(無添加)에 비(比)하여 부숙온도(腐熟溫度)가 현저(顯著)히 높게 유지(維持)되는 경향(傾向)이었다. 2. 퇴적기간중(堆積期間中) $NH_4-N$, $P_2O_5$ 및 $SiO_2$ 함량(含量)은 Zeolite, 계분(鷄糞), 요소등(尿素等)의 첨가(添加)로 증가(增加)되었으며 부숙(腐熟)이 진전(進展)됨에 따라 증가폭(增加幅)이 더 큰 것으로 보아 Zeolite의 양분류실효과(養分流失效果)과 있었던 것으로 사료(思料)된다. 3. 계분(鷄糞), 요소등(尿素等)과 함께 Zeolite를 첨가(添加)하였을 때 퇴적후(堆積後) 30일(日)에 C/N율(率)이 21.7~25.0 이었고, Zeolite 무첨가시(無添加時)는 준적후(准積後) 60일(日)에야 C/N율(率)이 21.3~24.8로써 속성퇴비제조(速成堆肥製造)와 양분(養分)의 유실방지(流失防止)를 위(爲)한 Zeolite의 효과(效果)가 인정(認定)되었다. 4. 퇴적후(堆積後) 90일(日)의 C/N율(率)과 용적감소율(容積減少率)과는 부(負)의 유의상관(有意相關)이 인정(認定)되었다.

• Korean Chemical Engineering Research
• /
• 제49권1호
• /
• pp.89-94
• /
• 2011

하이브리드 SNCR-SCR 공정의 질소산화물 저감특성을 파일럿 규모의 흐름반응기를 이용하여 고찰하였다. SNCR 공정의 질소산화물 저감효율은 $970^{\circ}C$에서 80% 수준이었으며 하이브리드 SNCR-SCR 공정은 NSR = 2.0, $940{^{\circ}C}$에서 92%의 저감율을 보였다. SNCR 단일 공정과 비교할 때, 하이브리드 SNCR-SCR 공정은 $940^{\circ}C$보다 낮은 저온영역에서 보다 효과적이었다. 암모니아 유출농도는 비교적 높은 공간속도조건에서 1 ppm 이하로 유지되었으며 요구되는 촉매양은 SCR 단일공정과 비교할 때 2/3 수준으로 감소하였다. 질소산화물 저감을 위한 하이브리드 SNCR-SCR 공정의 주요인자는 SNCR 공정에 분사되는 요소용액의 질소산화물에 대한 선택도와 생성되는 암모니아 농도로 조사되었다.

• 한국세라믹학회지
• /
• 제42권11호
• /
• pp.729-736
• /
• 2005

HTGR (High Temperature Gas-cooled Reactor) is spotlighted to next generation nuclear power plant for producing the clean hydrogen gas and the electricity. In this study, the spherical $UO_3$ gel particles were prepared by the external gelation process, and the characteristics of these particles were analyzed the particle shape, composition of precipitate, and thermal decomposition characteristics with the Streoscope, FT-IR, and X-ray diffractometer. Raw material of the ADUN (Acid Deficient Uranyl Nitrate) solution, which has [$NO_3$]/[U] mole ratio = 1.75, was obtained from dissolution of the $U_{3}O_{8}$ powder with concentrated $HNO_3$, and its concentration is 3.5 M-U/l. The broth solution is prepared with the ADUN, urea, PVA, and THFA solution. The droplets of the broth solution was made through a nozzle system. From this study, we obtained the following results; 1) an externel chemical gelation process is a suitable method in the spherical $UO_3$ particle production, 2) the particle shape are changed by an urea mixing time, THFA volume, and the viscosity of the broth solution, 3) the amorphous $UO_3$ particles obtained from these experiments was converted to $U_{3}O_{8}$ and then $UO_2$ by heat treatment in hydrogen atmosphere at $600^{\circ}C$.

• 대한화학회지
• /
• 제26권2호
• /
• pp.88-94
• /
• 1982

요소공장의 굴뚝에서 방출되는 가스상 암모니아와 입자상 암모늄을 측정하여 대기중에서 암모니아가 암모늄으로 전환되는 속도를 추정하였다. 암모니아가 암모늄으로 전환되는 것은 대기중에서의 수송시간에 따라 2단계로 나누어진다. 수송 초기 15분동안의 전환속도는 3.2%ㅡmin$^{-1}$이고 그 후는 0.26%min$^{-1}$이었다. 수송 초기단계에서 전환속도가 빠른 것은 굴뚝에서 방출된 유출가스의 온도강하에 의하여 생성된 물방울에 암모니아가 용해하고, 또 이 알칼리성 물방울에서 요소가 분해반응을 일으킴으로써 암모늄의 농도가 급격히 증가하였기 때문인 것으로 추정되었다. 암모니아 가스의 반감기는 수송 초기단계에서 약 16분이고, 그 후는 192분이었다. 측정기간에 있어서 입자상 암모늄염과 대기온도, 상대습도, 이산화황, 질소산화물 및 부유분진 농도와의 사이에는 상관관계가 관찰되지 않았다.

• 한국자동차공학회논문집
• /
• 제23권2호
• /
• pp.199-207
• /
• 2015

Solid materials of ammonia sources with SCR have been considered for the application of lean NOx reduction in automobile industry, to overcome complex problems of liquid urea based SCR. These solid materials produce ammonia gas directly with proper heating and can be packaged by compact size, because of high volumetric ammonia density. Among ammonium salts and metal ammine chlorides, calcium ammine chloride was focused on this paper due to low decomposition temperature. In order to make calcium ammine chloride in lab-scale, simple reactor and glove box was designed and built with ammonium gas tank, regulator, and sensors. Basic test conditions of charging ammonia gas to anhydrous calcium chloride are chosen from equilibrium vapor pressure by Van't Hoff plot based on thermodynamic properties of materials. Synthetic method of calcium ammine chloride were studied for different durations, temperatures, and pressures with proper ammonia gas charged, as a respect of ammonia gas adsorption rate(%) from simple weight calculations which were confirmed by IC. Also, lab-made calcium ammine chloride were analyzed by TGA and DSC to clarify decomposition step in the equations of chemical reaction. To understand material characteristics for lab-made calcium ammine chloride, DA, XRD and FT-IR analysis were performed with published data of literature. From analytical results, water content in lab-made calcium ammine chloride can be discovered and new test procedures of water removal were proposed.

• 한국지반공학회논문집
• /
• 제32권5호
• /
• pp.5-13
• /
• 2016

요소 분해 미생물을 이용하여 흙 입자 사이에 칼사이트를 석출시킬 때 칼슘원이 필요하며, 일반적으로 염화칼슘을 칼슘원으로 사용하고 있다. 염화칼슘은 도로, 지반 및 주변 식물에 부작용을 일으키므로 본 연구에서는 버려지는 달걀껍질을 사용한 칼슘원을 개발하고자 하였다. 미생물에 기존 칼슘원인 염화칼슘 또는 식초로 달걀껍질을 분해하여 얻은 새로운 칼슘원을 혼합하여 모래 입자 사이에 칼사이트를 생성시킨 다음, 고결모래의 칼사이트 생성량, 투수계수 및 일축압축강도를 비교 분석하였다. 공시체 제작은 느슨한 상태의 Ottawa모래로 직경 5cm, 높이 10cm 공시체를 만든 다음 Sporosarcina pasteurii 미생물을 포함한 요소와 두 종류의 칼슘원을 1일 1회씩 30일 동안 주입하여 제작하였다. 칼슘원으로 달걀껍질을 사용한 경우 칼사이트 생성량은 평균 7.2%로 염화칼슘을 사용한 경우보다 1.2배 높았다. 또한 달걀껍질을 사용하여 고결시킨 공시체의 투수계수는 평균 3.82E-5cm/s로 7.7배 정도 감소하였으며, 일축압축강도는 평균 387kPa로 염화칼슘을 사용한 경우보다 1.2배 높았다. 한편, 칼슘원에 관계없이 칼사이트 생성량이 증가할수록 강도는 증가하고 투수계수는 감소하는 경향을 보였다.

• 한국분말재료학회지
• /
• 제12권6호
• /
• pp.413-421
• /
• 2005

Copper is able to work as a current collector under wide range of hydrocarbon fuels without coking in Solid oxide fuel cells (SOFCs). The application of copper in SOFC is limited due to its low melting point, which result in coarsening the copper particle. This work focuses on the sintering of copper powder with ceria coating layer. Ceria-coated powder was prepared by thermal decomposition of urea in $Ce(NO_3)_3\cdot6H_2O$ solution, which containing CuO core particles. The ceria-coated powder was characterized by XRD, ICP, and SEM. The thermal stability of the ceria-coated copper in fuel atmosphere $(H_2)$ was observed by SEM. It was found that the ceria coating layer could effectively hinder the grain growth of the copper particles.

• 한국물환경학회지
• /
• 제31권1호
• /
• pp.42-48
• /
• 2015

This study focused on effective decomposition methods for low concentrated organic compounds from the reuse of industrial wastewater, and confirmed the possibility through photocatalyst media. Photocatalyst immobilized media was developed to carry on this experiment which confirmed the removal possibility of low concentrated organic compounds. Considering the stability and efficiency of photocatalyst immobilization, inorganic support, hollow bead, and $TiO_2$ nano powder were used. As a result of the removal experiment, the removal efficiencies of acetonitrile, ethanol, IPA(Isopropyl alcohol), methanol were above 75% after 15 minutes while those of acetone, acetaldehyde, urea were 10%, 45%, 20%, respectively after 60 minutes. If further studies were made to increase the surface area of the photocatalyst immobilized media, the efficiency of the removal of low concentrated organic compounds can be improved and this solution can also be used in an actual treatment process.

• 한국염색가공학회지
• /
• 제30권1호
• /
• pp.29-37
• /
• 2018

Cotton has no adsorption ability for the cationic dye and heavy metal but, if anionized cotton can be made, it will be possible. In this study, to enable the anionisation of cotton fabric, it was modified using sodium vinylsolfonate(SV) as the anionisation reagent, employing a pad-dry-cure(PDC) technique. The effects of curing time, treatment concentrations of urea, sodium hydroxide and SV on the weight increase were experimented and then, the physical characterizations of sulfoethyl cotton(SEC) depending on the finishing conditions were estimated, thus the application possibility of SV as anionisation reagent was investigated. It was not much changed by anionisation except wrinkle recovery. And the structure of SEC was elucidated by Raman and NMR spectoscopy. The feasibility of using Raman and NMR spectroscopy with the band at $1,043cm^{-1}$, and 50.5ppm, respectively as marker band to determine sulfoethyl group of SEC was reported. The total degree of SV substitution(DSV) was determined via elemental analysis. SEC with diverse total DSV up to 0.066 was obtained. In the thermal decomposition(pyrolysis) by DSC, it can be found that the pyrolysis temperature was about $30^{\circ}C$ lower than that of non-treated cotton fabric.

• Elastomers and Composites
• /
• 제57권1호
• /
• pp.13-19
• /
• 2022

Polycarbonate diol-based waterborne polyurethane (WPU) was prepared by prepolymer mixing process. The prepolymer mixture contained the polycarbonate diol, isophorone diisocyanate (IPDI), dimethylol propionic acid, triethylamine, and ethylenediamine (EDA). The NCO/OH ratio in the prepolymer was adjusted by controlling the molar ratio of IPDI, and its effects on the properties of WPU were studied. The structure of WPU was characterized by fourier transform infrared spectroscopy. The average particle size increased and viscosity decreased with increasing NCO/OH ratio and EDA content in WPU. The reduced phase separation between soft and hard segments increased glass transition temperature. The reduction in the thermal decomposition temperature could be attributed to the low bond energy of urethane and urea groups, which constituted the hard segment. Additionally, the polyurethane chain mobility was restricted, elongation decreased, and tensile strength increased. The hydrogen bond between the hard segments formed a dense structure that hindered water absorption.