• Journal of Advanced Navigation Technology
• /
• v.28 no.2
• /
• pp.163-171
• /
• 2024

In the existing air traffic management (ATM) system, various types of safety alert features are provided based on trajectory data to ensure the safety of aircraft operations, along with aircraft position and detailed flight information. The urban air traffic management (UATM) system for urban air mobility (UAM) should also provide safety alert features to ensure the safety of UAM operations. Considering the operational environment of UAM, it is necessary that the safety alert features provided at least match or exceed those available in the existing ATM system. This study aims to present the safety alert features of the new UATM system that differ from those provided by the existing ATM system before introduction and commercialization of UAM. The study was conducted focusing on the safety alert features that should be provided in the event of a deviation from the UAM's path, and the establishment of the safety alert features was carried out in two parts: approach path monitor (APM), which is applied during the approach phase, and route adherence monitoring (RAM), which is applied during the cruise phase.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.5
• /
• pp.148-162
• /
• 2023

The objective of this study is to derive the appropriate perception location for changes in driving behavior of autonomous vehicles in urban road environments based on traffic safety signs. For this purpose, 32 types of signs that induce changes in driving behavior were selected from currently used traffic safety signs and classified as three types according to changes in driving behavior. Based on this, three scenarios were designed: stop, speed change, and lane change scenarios. These were used to confirm the impact on traffic flow. As a result of the analysis, it was found that each scenario needs to receive information on traffic safety signs in advance to ensure changes in traffic flow and safety. Consequently, the appropriate perception location can be used as a basis for establishing standards for delivering message sets to autonomous vehicles or revising traffic safety signs for them. In addition, this study is expected to contribute to the establishment of safe and efficient driving strategies on urban roads as autonomous vehicles are introduced in the future.

• International Journal of Railway
• /
• v.6 no.2
• /
• pp.33-44
• /
• 2013

In recent years, energy consumption in the transportation sector by expanding motorization continues to increase in almost every country in the world. Moreover, the growth rate of the transportation energy consumption is significantly higher than those of the civilian and industrial sectors. Therefore, every country strives to reduce its dependence on private transport, which is the main contributor to the transportation energy consumption. In many countries, concepts such as Transit Oriented Development (TOD) or New Urbanism, which controls road traffic by increasing the proportion of the public transportation significantly, have been implemented to encourage a modal shift to public transport. However, the level of change required for eliminating environmental problems is a challenging task. Minimizing transportation energy consumption by controlling the increase of the traffic demand and maintaining the level of urban mobility simultaneously is a pressing dilemma for each city. Grasping the impact of the diversity of the urban transport and infrastructure is very important to improve transportation energy efficiency. However, the potential for reducing urban transportation energy consumption has often been ineffectively demonstrated by the diversity of cities. Therefore, the accuracy of evaluating the current efficiency rate of the urban energy consumption is necessary. Nevertheless, quantitative analyses related to the efficiency of transportation energy consumption are scarce, and the research on the current condition of consumption efficiency based on international quantitative analysis is almost nonexistent. On the basis of this background problem definitions, this research first built a database of the transportation energy consumption of private modes in 119 cities, with an attempt to reflect individual travel behaviors calculated by Person Trip data. Subsequently, Data Envelopment Analysis (DEA) was used as an assessment method to evaluate the efficiency of transportation energy consumption by considering the diversity of the urban traffic features in the world cities. Finally, we clarified the current condition of consumption efficiency by attempting to propose a target values for improving transportation energy consumption.

• Journal of Korean Society of Transportation
• /
• v.1 no.1
• /
• pp.10-27
• /
• 1983

In order to improve the traffic enviroments in the urban streets of Seoul, the computer controlled traffic signal system was installed on 45 intersections at 1980. Afterward, yearly expansion was done to the numbers of 132 intersections and 232 loop detectors. The problems of timing plans were discussed, mainly pedestrian crossing timing as well as the generations of split and offset. The broad urban streets more than 30m require long phasing time of pedestrians, even though the equivalent or correspondent traffic volume is rare. The configuration of computer system for traffic control was disscussed in terms of control strategy. An overview also given. The improvements were measured at every quater. The travel speed improved to 42%, delay time reduced to 41% and number of stops to 43% respectively.

• Journal of the Korean Society of Safety
• /
• v.27 no.3
• /
• pp.161-166
• /
• 2012

This study deals with the accident of roundabout. The objective is to analyze the traffic accidents occurred in 3-legged and 4-legged roundabouts through the developed models. In developing the multiple linear regression models, this study uses the number of traffic accidents as a dependent variable and such the variables as geometric structures, traffic characters and others as the independent variables. The correlation and multicollinearity of variables were analyzed using SPSS17.0. The main results are as follows. First, R-square value of developed models were analyzed to be 0.851(3-leg) and 0.689(4-leg), respectively. Second, the independent variables in the 3-legged roundabout accident model were analyzed to be the traffic volume and number of crosswalk, and the variables in the 4-legged roundabouts were evaluated to be the traffic volume and signal. Finally, the paired t-test shows that the predicted values and observed values are not statistically different.

• Journal of KSNVE
• /
• v.6 no.2
• /
• pp.253-259
• /
• 1996

Neighboring buildings which are sufficiently close to both sides of an urban street reflect sound back to the road and sound energy is increased by thses reflectors. Therefore, this study is forcussed on the prediction modeling for road traffic noise under reflective conditions. A part of a block in urban road is regared as a box. The sound energy density in the box is employed to establish prediction formulas in terms of independent variables. The variables. The validity of the proposed prediction method has been experimentally confirmed by applying it to actually measured road traffic noise data. On the whole, the agreement between measured and predicted noise levels appeared to be satisfactory.

• Journal of Korean Society of Transportation
• /
• v.14 no.2
• /
• pp.7-29
• /
• 1996

Traffic flow characteristics is analysed on eight multi-lane roads which are unsignalized in urban areas. Data of traffic flow rates by classification and average speed were gathered every ten minutes interval for twenty-four hours. Machine (NC-90A) was used to acquire the field data. The major purpose of this study is to build up speed-density models on urban arterial roads. Five different kinds of models were tested. Those models are Greenshields' model, Greenberg's model, modified Greenberg's model, Underwood's model and Drake's model. The modified Greenberg's model fits best at six points and the Greenshield's model fits best two points out of eight points. The breakpoint(Kb) of modified Greenberg's model is between 10 and 32 pcphpl. Capacity drawn from speed-volume relationships were appeared to be arround 2,000 and 2,200 pcphpl at the Hannam Bridge and the Hannam Overpass and 1,100 and 1,700 pcphpl at Namsan Tunnel(No1) and the beginning point of Gyeong-Bu Expressway.

• Korean Journal of Remote Sensing
• /
• v.18 no.5
• /
• pp.263-271
• /
• 2002

Recently, spatial information technologies using remotely sensed imagery and functionality of GIS (Geographic Information Systems) have been widely utilized to various types of transportation-related applications. In this study, extraction programs of some practical indices, to be effectively used in transportation reference planning problem, were designed and implemented as prototyped extensions in GIS development environment: traffic flow estimation (TFL/TFB), urban rural index (URI), and accessibility index (AI). In TFL/TFB, user can obtain quantitative results on traffic flow estimation at link/block using high-resolution satellite imagery. Whereas, URI extension provides urban-rural characteristics related to road system, being considered one of important factors in transportation planning. Lastly, AI extension helps to obtain accessibility index between nodes of road segments and surrounding district areas touched or intersected with the road network system, and it also provides useful information for transportation planning problems. This approach is regarded as one of RS-T (Remote Sensing in Transportation), and it is expected to expand as new application of remotely sensed imagery.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2023.11a
• /
• pp.259-260
• /
• 2023

The rapid urbanization and modernization observed in countries like Myanmar have led to significant concerns regarding traffic congestion, especially in urban areas. This study focuses on the analysis and revitalization of urban transport in selected areas of Myanmar. The core of urban transportation planning lies in travel forecasting, which employs models to predict future traffic patterns and guide decisions related to road capacity, transit services, and land use policies. Travel demand modeling involves a series of mathematical models that simulate traveler behavior and decision-making within a transportation system, including highways, transit options, and policies. The paper offers an overview of the traditional four-step transportation modeling system, utilizing a simplified transport network in the context of Mandalay City, Myanmar.

• Journal of Korean Society of Transportation
• /
• v.27 no.3
• /
• pp.29-38
• /
• 2009

In Korea, large.scale housing complexes and residential areas began to appear in urban regions through urban plan projects from the 1970s. In addition, with the increase in the percentage of apartments in developed areas, road traffic noise at roadside apartments was raised as a new problem. Furthermore, since the late 1980s, apartments, which had been no taller than 15 stories, have grown higher to 20-30 stories and recently 40.story or higher apartments are being constructed, and as a result, residences are growing denser and road traffic noise is increasing in urban areas. Thus, the present study made a noise map using variables 'traffic volume' and 'mean spot speed' among factors influencing roadside apartments, and examined the noise reduction efficiency of the variables. According to the results, traffic volume and speed limit were found to have an effect on a limited space, and the median bus lane system was found to have a slight effect on the roadside.