• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.25 no.5
• /
• pp.1-13
• /
• 2022

The damages caused by landslides are increasing worldwide due to climate change. In Korea, damages from landslides occur frequently, making it necessary to develop the effective response strategies. In particular, there is a lack of countermeasures against landslides in cultural heritage areas. The purpose of this study was to spatially analyze the relationship between Buyeo-gun's cultural heritage and landslide susceptible areas in Buyeo-gun, Chungcheongnam-do, which has a long history. Nine spatial distribution models were used to evaluate the landslide susceptibility, and the ensemble method was applied to reduce the uncertainty of individual model. There were 17 cultural heritages belonging to the landslide susceptible area. As a result of calculating the area ratio of the landslide susceptible area for cultural heritages, the cultural heritages with 100% of the area included in the landslide susceptible area were "Standing statue of Maae in Hongsan Sangcheon-ri" and "Statue of King Seonjo." More than 35% of "Jeungsanseong", "Garimseong", and "Standing stone statue of Maitreya Bodhisattva in Daejosa Temple" belonged to landslide susceptible areas. In order to effectively prevent landslide damage, the application of landslide prevention measures should be prioritized according to the proportion belonging to the landslide susceptible area. Since it is very difficult to restore cultural properties once destroyed, preventive measures are required before landslide damage occurs. The approach and results of this study provide basic data and guidelines for disaster response plans to prevent landslides in Buyeo-gun.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.11
• /
• pp.19-24
• /
• 2023

Ground anchor has been widely used specially for maintaining stability on reinforced cut slope in expressway. While the durability of the ground anchors should be ensured over the service life. However, the long-term loss of tensile force has occurred in most of field-installed anchors. Main causes are not clearly identified and very few studies have been made for analyzing long-term behavior of ground anchor in slopes. In this study, full-scale model tests and long-term measurements were made to obtain the load-displacement data and identified the causes of the long-term behaviors of ground anchor. As a result, the bond strength decreases exponentially with increasing water-binder ratio. Especially, groundwater is the most influencing factor to the bond strength. In the long-term behavior, the load decreases sharply until the initial settlement stabilized, and thereafter the tension force decreases constantly.

• International Journal of High-Rise Buildings
• /
• v.4 no.1
• /
• pp.45-55
• /
• 2015

The rotation capacity of the moment connections could significantly influence on the seismic performance of steel moment resisting frames. Current seismic provisions require that beam-to-column connections in Intermediate Moment Frames (IMF) should have a drift capacity as large as 0.02 radian. The objective of this study was to evaluate the effect of the rotation capacity of moment connections on the seismic performance of high-rise IMFs. For this purpose, thirty- and forty-story high-rise IMFs were designed according to the current seismic design provisions. The seismic performance of designed model frames was evaluated according to FEMA P695. This study showed that the forty-story IMF satisfied the seismic performance objective specified in FEMA P695 when the rotation capacity of the connections was larger than 0.02. However, thirty-story IMFs satisfied the performance objective when the connection rotation capacity is larger than 0.03.

• Journal of Korean Society on Water Environment
• /
• v.24 no.2
• /
• pp.180-184
• /
• 2008

A distributed hydrologic model of an urban drainage area on Bugok drainage area in Oncheon stream was developed and combined with a optimization method to determine the optimal location and number of best management practices (BMPs) for storm water runoff reduction. This model is based on the SCS-CN method and integrated with a distributed hydrologic network model of the drainage area using system of 4,211 hydrologic response units (HRUs). Optimal location is found by locating HRU combination that leads to a maximum reduction in peak flow at the drainage outlet in this model. The results of this study indicate the optimal locations and numbers of BMPs, however, for more exact application of this model, project cost and SCS-CN reduction rate of structural facilities such infiltration trench and pervious pavement will have to be considered.

• Journal of Environmental Impact Assessment
• /
• v.15 no.6
• /
• pp.435-441
• /
• 2006

For the calibration of rainfall-runoff model, automatic calibration methods are used instead of manual calibration to obtain the reliable modeling results. When mathematical programming techniques such as linear programming and nonlinear programming are applied, there is a possibility to arrive at the local optimum. To solve this problem, genetic algorithm is introduced in this study. It is very simple and easy to understand but also applicable to any complicated mathematical problem, and it can find out the global optimum solution effectively. The objective of this study is to develope a parameter optimization program that integrate a genetic algorithm and a rainfall-runoff model. The program can calibrate the various parameters related to the runoff process automatically. As a rainfall-runoff model, SWMM is applied. The automatic calibration program developed in this study is applied to the Jangcheon watershed flowing into the Youngrang Lake that is in the eutrophic state. Runoff surveys were carried out for two storm events on the Jangcheon watershed. The peak flow and runoff volume estimated by the calibrated model with the survey data shows good agreement with the observed values.

• Geomechanics and Engineering
• /
• v.8 no.6
• /
• pp.769-781
• /
• 2015

The skin friction of a pile foundation is important and essential for its design and analysis. More attention has been given to the softening behaviour of skin friction of a pile. In this study, to investigate the load-transfer mechanism in such a case, an analytical solution using a nonlinear softening model was derived. Subsequently, a load test on the pile was performed to verify the newly developed analytical solution. The comparison between the analytical solution and test results showed a good agreement in terms of the axial force of the pile and the stress-strain relationship of the pile-soil interface. The softening behaviour of the skin friction can be simulated well when the pile is subjected to large loads; however, such behaviour is generally ignored by most existing analytical solutions. Finally, the effects of the initial shear modulus and the ratio of the residual skin friction to peak skin friction on the load-settlement curve of a pile were investigated by a parametric analysis.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1433-1437
• /
• 2008

본 연구에서는 타당성조사 수준의 재해저감시설 계획을 위한 지역구분을 시행할 때 지형자료 등 최소한의 자료만으로 객관성이 높고, 수문학적으로 의미있는 지역구분이 설정될 수 있도록 기준을 정립하고 그에 따른 근거를 설정하고자 하였다. 내배수 침수재해와 관련하여 기존의 치수계획이 빗물펌프장 등 일부 구조물에만 한정되어 해당 홍수방어시설에 과도한 부담을 주고 있으므로 유역내 저류지, 빗물 탱크, 침투시설 등의 다양한 내배수 홍수분담시설의 설치 및 그에 따른 효과를 종합적으로 고려한 계획수립이 필요하다. 또한 지속적으로 피해가 커지고 있고 피해원인 및 양상이 다양해지는 도시유역의 내배수 재해에 대한 대책으로 피해지역의 확인 및 관련 저감대책 수립을 위한 지역구분의 방안에 대한 연구가 최근들어 강조되고 있다. 내배수 재해에 대응하기 위해서 전체유역을 지형특성 및 재해저감 시설의 입지조건을 종합적으로 고려하여 보수, 유수, 저지지역의 구분 방안을 검토하였다. 저지지역 설정을 위한 기준으로 평균침수심을 활용하였고, 아울러 유수지역과 보수지역을 구분하기 위해서는 습윤지수를 활용한 지표의 포화여부와 한계경사를 활용하였다. 이러한 지역구분 결과는 내배수 재해저감시설의 설치를 위한 기초자료로써 활용 방안을 검토하였다.

• Geomechanics and Engineering
• /
• v.6 no.1
• /
• pp.17-31
• /
• 2014

This paper investigates the development of failure surfaces induced by an embankment on soft marine clay deposits and the characteristics of such surfaces through numerical simulations and its comparative study with monitoring results. It is well known that the factor of safety of embankment slopes is closely related to the vertical loading, including the height of the embankment. That is, an increase in the embankment height reduces the factor of safety. However, few studies have examined the relationship between the lateral movement of soft soil beneath the embankment and the factor of safety. In addition, no study has investigated the distribution of the pore pressure coefficient B value along the failure surface. This paper conducts a continuum analysis using finite difference methods to characterize the development of failure surfaces during embankment construction on soft marine clay deposits. The results of the continuum analysis for failure surfaces, stress, displacement, and the factor of safety can be used for the management of embankment construction. In failure mechanism, it has been validated that a large shear displacement causes change of stress and pore pressure along the failure surface. In addition, the pore pressure coefficient B value decreases along the failure surface as the embankment height increases. This means that the rate of change in stress is higher than that in pore pressure.

• KIEAE Journal
• /
• v.16 no.3
• /
• pp.95-101
• /
• 2016

Purpose: Recently, high-rise buildings are popular in korea due to high rate of land usage and cost performance in urban area. However, high-rise building causes several problems such as safety issues, cooling/heating load, stack effect, disaster prevention etc. The stack effect is one of the representative problems. Even though there are many researches on stack effect, there are few studies on design guideline considering local condition. Method: This study focuses on the change of pressure distribution according to the design factors which affects the airflow in high-rise residential buildings by simulation analysis. In this study, city, building floor, stairwell door leakage area, elevator door leakage area and changes of layout were considered ad the design factor. Result: The simulation results indicate that building height and ambient air temperature are significant design factor for stack effect.

• Fire Science and Engineering
• /
• v.33 no.3
• /
• pp.98-104
• /
• 2019

This study examined the efficient management of a fire protection system using spatial information, and basic data for the development of related firefighting industry were obtained. To overcome the problems of malfunction and management failure, which are the major issues of fire protection system management, this study analyzed the related laws and regulations on building spatial information of a fire protection system to introduce spatial information to the fire protection system field. For efficient management of the fire protection system, it is necessary to revise the related laws of the fire protection system, such as protection system-related laws including space information technology, and maintain the standardization, effectiveness, and consistency of fire protection system spatial information.