• Nuclear Engineering and Technology
• /
• v.55 no.3
• /
• pp.1097-1104
• /
• 2023

A preliminary criticality analysis for novel pyrochemical apparatuses for the reprocessing of mixed uranium-plutonium nitride spent nuclear fuel from the BREST-OD-300 reactor was performed. High-temperature processing apparatuses, "metallization" electrolyzer, refinery remelting apparatus, refining electrolyzer, and "soft" chlorination apparatus are considered in this work. Computational models of apparatuses for two neutron radiation transport codes (MCU-FR and MCNP) were developed and calculations for criticality were completed using the Monte Carlo method. The criticality analysis was performed for different loads of fissile material into the apparatuses including overloading conditions. Various emergency situations were considered, in particular, those associated with water ingress into the chamber of the refinery remelting apparatus. It was revealed that for all the considered computational models nuclear safety rules are satisfied.

• Journal of the Korean Society of Radiology
• /
• v.15 no.1
• /
• pp.37-43
• /
• 2021

Republic of Korea has many nuclear facilities in the country, and Democratic People's Republic of Korea(North Korea) locates in the surrounding country. Therefore, it is necessary to construct the target facility's nuclear forensic data in a preemptive response to the changing international situation. For this reason, this study suggests "signature" materials used to understand the origins and sources of nuclear and other radioactive materials, taking into account domestic nuclear facilities and the nuclear fuel cycle. In domestic, pressurized light water reactors and pressurized heavy water reactors are in operation, and enriched and natural uranium are used as fuels. In the front-end fuel cycle, the signature materials can be nature uranium and UF6 in the uranium enrichment process. The domestic back-end fuel cycle adopts a non-circulating cycle excluding the reprocessing process, and the primary signature material is spent nuclear fuel. According to IAEA recommendation, the importance of these materials as the signature and characteristic contents are suggested in this study. To prove the integrity of nuclear material and build a national nuclear forensics library, it is necessary to grasp the signature material and acquire the characteristic data considering the domestic nuclear facilities and the nuclear fuel cycle.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.2
• /
• pp.113-122
• /
• 2007

In this study, uranium migration experiments have been performed using a natural groundwater and a granite core with natural fractures in a glove-box constructed to simulate an appropriate subsurface environment. Groundwater flow experiments using the non-sorbing anionic tracer Br were carried out to analyze the flow properties of groundwater through the fracture of the granite core. The result of the uranium migration experiment showed a breakthrough curve similar to that of the non-sorting Br. This result may imply that uranium migrates as anionic complexes through the rock fracture since uranium can form carbonate complexes at a given groundwater condition. The distribution coefficient $K_d$ of the uranium between the groundwater and the fracture filling material was obtained as low as 2.7 mL/g from a batch sorption experiment. This result agrees well with the result from the migration experiment, showing a faster elution of the uranium through the rock fracture. In order to analyze retardation properties of the uranium through the rock fracture, the retardation factor $R_d({\sim}16.2)$ was obtained by using the $K_d$ obtained from the batch sorption experiment and it was compared with the $R_d({\sim}14.3)$ obtained by using the result from the uranium migration experiment. The values obtained from the both experiments were very similar to each other. This reveals that the retardation of the uranium is mainly occurred by the fracture filling material when the uranium migrates through the fracture of a granite core.

• Korean Journal of Metals and Materials
• /
• v.49 no.7
• /
• pp.549-556
• /
• 2011

This study aimed to evaluate the performance of diffusion barriers in order to prevent fuel-cladding chemical interaction (FCCI) between the metallic fuels and the cladding materials, a potential hazard for nuclear fuel in sodium-cooled fast reactors. In order to prevent FCCI, Zr or V metal is deposited on the ferritic-martensitic stainless steel surface by physical vapor deposition with a thickness up to $5{\mu}m$. The diffusion couple tests using uranium alloy (U-10Zr) and a rare earth metal such as Ce-La alloy and Nd were performed at temperatures between 660~800$^{\circ}C$. Microstructural analysis using SEM was carried out over the coupled specimen. The results show that significant interdiffusion and an associated eutectic reaction ocurred in the specimen without a diffusion barrier. However, with the exception of the local dissolution of the Zr layer in the Ce-La alloy, the specimens deposited with Zr and V exhibited superior eutectic resistance to the uranium alloy and rare earth metal.

• Nuclear Engineering and Technology
• /
• v.27 no.5
• /
• pp.721-729
• /
• 1995

The Korean optimal nuclear fuel cycle strategy from the year 2000 to 2030 is derived using linear programming. The fuel cycle cost, the cost uncertainty, and the natural uranium consumption are used as the criteria for the optimization. These objectives are compromised by fuzzy decision-making technique which maximizes the minimum degree of satisfaction among the three objectives. The options for the back-end fuel cycle are direct disposal, reprocessing, and DUPIC. The optimal fuel cycle strategy of Korea is to start reprocessing in around 2010 and increase its capacity with the maximum of 800 tHM in around 2025, and to star DUPIC processing in 2025. The cot uncertainty and the natural uranium consumption of the optimal fuel cycle strategy are reduced by 7.1％ and 6.1％, respectively, at the cost penalty of 5.4％ compared with the cost-only optimal solution.

• Nuclear Engineering and Technology
• /
• v.41 no.5
• /
• pp.715-722
• /
• 2009

A model to predict failure of designed-to-fail (dtf) fuel particles is discussed. The dtf fuel under study consisted of a uranium oxycarbide kernel coated with a single pyrocarbon seal coat. Coating failure was assumed to be due to fission gas recoil and knockout mechanisms and direct diffusive release of fission gas from the kernel, which acted to increase pressure and stress in the pyrocarbon layer until it ruptured. Predictions of dtf fuel failure using General Atomics' particle fuel performance code for HRB-17/18 and HFR-B1 irradiation tests were reasonably accurate; however, the model could not predict the failure for COMEDIE BD-1. This was most likely due to insufficient information on reported particle fuel failure at the beginning.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.247-250
• /
• 1998

The scattering of plane ultrasonic waves by the nuclear fuel pin of liquid metal reactor in sodium is studied. According to the internal composition in the cladding tube, the fuel pin has three cross sections, i.e. helium gas plenum, sodium-filled section, and fuel insertion section. The scattering spectra for each section of the fuel pin are different. The circumnavigating ultrasonic waves of each section are analyzed by the resonance scattering method. The whispering gallery wave modes are generated in the sodium-filled plenum section and the fuel rod insertion section with a sodium-gap. The circumferential wave modes are propagated in the cladding tube of the helium gas plenum section. The annular gap between the cladding tube and metal uranium pellet rod affects the scattering spectra. The different propagation characteristics can be utilized for the nondestructive method of detecting the unbonded area and measuring the level of the sodium-filled section of the fuel pin.

• Journal of Radiation Protection and Research
• /
• v.28 no.4
• /
• pp.361-368
• /
• 2003

The economic and environmental friendliness analysis of the nuclear fuel cycle options that can be expected in Korea were performed. Options considered are direct disposal, reprocessing and DUPIC (Direct Use of Spent PWR Fuel In CANDU Reactors). By considering the result of calculation of the annual uranium requirement and nuclear spent fuel generation by analysis of nuclear fuel material flows in the nuclear fuel cycle options, we decided the time of back-end nuclear fuel cycle processes and the volume. Then we can analyze the economic and environmental friendliness by applying the unit cost and unit value of each process, respectively.

• Nuclear Engineering and Technology
• /
• v.12 no.3
• /
• pp.194-213
• /
• 1980

The paper describes and quantifies the wastes arising in the nuclear fuel cycle for Light Water Reactors, Heavy Water Reactors and Fast Breeder Reactors. The management and disposal technologies are indicated, together with their environmental impacts. Both once-through and uranium-plutonium recycle systems are evaluated, and comparisons are made on the basis of tingle reference technologies for waste management, and for one gigawatt/year of electricity generation. Environmental impacts are assessed, particularly that of health and safety, and a reference costing system is applied purely as a basis for comparing the fuel cycles. From this study it call be concluded generally that the relative differences of the impacts of waste management and disposal between the selected fuel cycles are not decisive factors in choosing a fuel cycle. Employing the technologies assumed, the radioactive wastes from any of the fuel cycles studied can be managed and disposed of with a high degree of safety and without undue risk to man or the environment. The cost of waste management and disposal is only a few percent of the value of the electricity generated and does not vary greatly between fuel cycles.

• Nuclear Engineering and Technology
• /
• v.55 no.9
• /
• pp.3464-3471
• /
• 2023

The Uranium/Molybdenum metallic fuel has been proposed as promising advanced fuel concept especially in the dispersed fuel geometry. The fuel is manufactured in the form of small fuel droplets (particles) placed in a fuel pin covered by a matrix. In addition to fuel particles, the pin contains voids necessary to compensate material swelling and release of fission gases from the fuel particles. When investigating this advanced fuel design, two important questions were raised. Can the dispersed fuel performance be analyzed using homogenization without significant inaccuracy and what size of fuel drops should be used for the fuel design to achieve optimal utilization? To answer, 2D burnup calculations of fuel assemblies with different fuel particle sizes were performed. The analysis was supported by an additional 3D fuel pin calculation with the dispersed fuel particle size variations. The results show a significant difference in the multiplication factor between the homogenized calculation and the detailed calculation with precise fuel particle geometry. The recommended fuel particle size depends on the final burnup to be achieved. As shown in the results, for lower burnup levels, larger fuel drops offer better multiplication factor. However, when higher burnup levels are required, then smaller fuel drops perform better.