• 제목/요약/키워드: Upper-Bound

검색결과 971건 처리시간 0.023초

인간언어공학에의 활용을 위한 이종 개념체계 간 사상 - 세종의미부류와 KorLexNoun 1.5 - (Mapping Heterogenous Ontologies for the HLP Applications - Sejong Semantic Classes and KorLexNoun 1.5 -)

  • 배선미;임경업;윤애선
    • 인지과학
    • /
    • 제21권1호
    • /
    • pp.95-126
    • /
    • 2010
  • 본 연구에서는 인간언어공학에서의 활용을 위해 매우 이질적인 세종전자사전의 의미부류(SJSC)와 KorLexNoun 1.5(KLN)의 상위노드 간의 사상을 목표로, '의미 입자(sense grain)가 작은 개념체계(fine-grained ontology)' 간 귀납적이며 상향적인 수동 사상 방법론을 제안하였다. 동시에 이종 자원 간의 사상에 있어 각 의미체계의 이질성 때문에 발생하는 여러 가지 문제점을 살펴보고, 그 해결방안도 제안하였다. 두 이종 개념체계 간의 사상 방법은 SJSC의 단말 노드와 KLN의 Least Upper Bound(LUB)를 기본단위로 하여, 첫째, 어휘 분포를 이용하여 사상 후보군을 결정하고, 둘째, 계층 관계와 정의문과 용례를 이용하여 후보군들 간의 정확한 의미구분을 하며, 셋째, 상 하위-자매노드에 SJSC의 적정술어 및 정의문을 적용하여 LUB의 단계를 결정하고, 넷째, 양 의미체계의 계층관계를 비교함으로써 SJSC의 단말 노드와의 사상 여부를 판단하며, 마지막으로 KLN의 오류 및 전문용어 후보군은 사상에서 제외하였다. 이와같이 본 연구에서는 단계별 사상 준거의 설정에 있어 각 의미체계에 기술되어 있는 다양한 언어정보를 적극 이용하였는데, 이는 세밀한 수동 사상의 장점이라 할 수 있다. 본 연구에서 제안한 방법으로 사상한 결과, SJSC의 474개의 단말 및 비단말 노드와 KLN의 신셋(synset) 간에는 중복을 제외하고 6,487개의 LUB가 사상되었으며, 각 LUB의 하위노드를 포함해서는 모두 88,255개의 KLN 신셋이 사상되어 전체적으로는 97.91%가 사상되었다. 본 연구의 결과는 정교한 한국어 통사 및 의미 분석에 활용될 수 있을 것이다.

  • PDF

동북(東北)아시아 유의 기원(起源)과 그 교류(交流)에 관(關)한 연구(硏究) -$4{\sim}8$세기(世紀)를 중심(中心)으로- (A study on the origination and Transmission of Yu in Northeast Asia. -from the 4th Century to the 8th Century-)

  • 박경자;조선희
    • 복식
    • /
    • 제17권
    • /
    • pp.29-43
    • /
    • 1991
  • Yu was a type of dress worn on the upper part of the body which was commonly used in Northeast Asia. It was originally used by the Northern race for the need of courtesy as well as protecting cold. It was believed that Yu in Northeast Asia, which was called Kaftan, was came from Scythai lived in North Eurasian land around the Black sea. Scythians were the first-formed horse-riding race in the world and their civilization influenced those of far Asiatic sector along the steppe route. As their power expanded, their costume culture transmitted to the East(China, Korea, Japan). The upper garment, Yu, was characterized by the left-sided collars, narrow sleeves belted at the waist to the length of the hip line and the tight trouser on the lower part, which we commonly called HoBok(胡服) style. 1. Yu in Northeast Asia was originated from the Eurasians, Scythian Culture. Being exchanged, active style costumes were widely used among Chinese, Koreans and Japanese throughout centuries' including $4{\sim}8$ century. 2. Chinese Yu had a style of wide-sleeves and right-sided collars. The traditional costumes of Han race are consisted of wide-sleeved Yu on the upper and long-skirt on the lower part of the body. Before the adoptation of HoBok during reign of King Jo Mooryung in 307. B.C., HoBok style had already found in the remains since the Sang period. There were various names among Yu during the Han period. Seup, Sean Eui, Kye, Kyu were one of the styles and several names were meant for collar and sleeves. During $4{\sim}8$ centuries, clothes of right-sided collar were found, superior to that of left-sided and narrow sleeves were widely used both the royal and the humble. Various styles of decoration were seen in Yu around neck, back and sleeves comparing other nations. 3. Yu, in Korea, was typical style of Northern-bound HoBok. Both men and women had similarity in Yu style, narrow sleeves, left-sided collar, belted at the waist and to the length of hip line. Influenced by Han race, in the $4th{\sim}8th$ centuries, dual system of collar was found. But we cannot see major change in Yu and finally was connected to the present. 4. The original design of the Japanese costumes was not similar to that of Northern nomadic hunting race, which was suitable for horse-riding activities. Owing to the climates along the island, we could see various conditions ranging from the cold and to the warm. Influenced by the climates, pulling over the neck(Pancho style) were major design in Japan. As Korea was advanced earlier than Japan, Korean landed Japanese territory showing clothes. So primitive costumes had changes in style. During the $4th{\sim}8th$ period. The Korean mode was found in Haniwa (which was built to make sacrifices to the dead King) and costumes in Jeong Chang Won. Among the costumes in Jeong Chang Won, we put 3 or more costumes to the category of Yu characterizing elements of Korea and Tang period. From the $4th{\sim}8th$ century, China, Korea, Japan fell into the same cultural category, Scythai. Styles in Yu among three nations, we saw little differences, basically along times. Originated from the West Asia, Yu was transmitted to the far East changing Chinese costumes, Koreans melted it into the traditional elements and then influenced Japan.

  • PDF

온산공업지역 산성 토양 프로화일 내에서의 점토광물의 생성과 중금속 이온의 거동에 관한 광물학적 연구 (Mineralogical Study on the Clay Formation and Heavy Metal Speciation in the Acidified Soil Profile of the Onsan Industrial Area)

  • 이상수;김수진
    • 한국광물학회지
    • /
    • 제15권1호
    • /
    • pp.1-10
    • /
    • 2002
  • 이 논문은 온산공업단지 내 화강암의 풍화 및 토양화 과정, 그리고 토양 내 중금속 오염과 토양 광물간의 관계에 관한 연구이다. 프로화일 연구를 위해 각 깊이별로 토양시료를 채취하여 각 샘플에 대한 실험분석을 실시하였다. X선 회절분석 결과 주 구성 점토광물은 캐올린 광물과 버미큘라이트, 그리고 미량의 일라이트이다. 포름아마이드 처리를 통해 프로화일 내 토양 중의 캐올린 광물의 종류에 대해 분석한 결과 프로화일 하부에 존재하는 캐올린 광물은 대부분 할로이사이트 임이 밝혀졌으며, 지표면으로 갈수록 상대적으로 캐올리나이트에 대한 할로이사이트의 양이 감소하는 경향을 보이는데, 이는 상부로 갈수록 할로이사이트에서 캐올리나이트로의 전환이 이루어지고 있음을 의미한다. $110^{\circ}C,\;300^{\circ}C,\;550^{\circ}C$ 열처리를 한 결과 X선회절분석 그래프 상의 $10\;{\AA}에서\;14\;{\AA}$ 사이의 피크가 분화된 형태를 보여주는 것이 관찰된다. 이는 시료상에 수산화알루미늄 혼합층 버미큘라이트가 존재함을 지시한다. 이것은 구연산나트륨 처리실험을 통해 버미큘라이트 층간 불순 알루미늄 이온을 추출하여 원형상으로 전환시킴으로써 열처리시 $14\;{\AA}$피크가 다시 $10\;{\AA}$으로 변화하는 것을 관찰함으로써 재확인하였다. 토양의 수소이온농도 분포 양상이 하부에서 3.9, 상부에서 3.6으로 상부로 갈수록 산성화경향이 심해지는 경향을 보여주는데, 이는 산성화된 토양에서 안정적으로 나타나는 수산화알루미늄 혼합층 버미큘라이트의 존재를 뒷받침하고 있다. 토양 내 중금속 이온의 존재양상에 대한 연구를 위해 연속추출실험을 실시하였다. 그 결과 상대적으로 많은 양의 중금속 이온이 프로화일의 상부의 철/망간 산화물과 유기물에 흡착되어 있으며 점토광물에는 적은 양만이 흡착되어 있는 것으로 밝혀졌다. 이러한 결과는 대부분의 중금속 오염물들이 상부 토양에 농집되어 있고 점토광물에는 낮은 중금속 함량을 보여주는 것은 산성화된 토양을 이루고 있는 주 점토광물인 캐올린광물과 수산화알루미늄 혼합층 버미큘라이트가 낮은 흡착능력을 가지고 있기 때문인 것으로 판단한다.

양방향 비대칭 채널에서 네트워크 부호화를 위한 변조 방식 (Modulation Scheme for Network-coded Bi-directional Relaying over an Asymmetric Channel)

  • 류현석;강충구
    • 한국통신학회논문지
    • /
    • 제37권2B호
    • /
    • pp.97-109
    • /
    • 2012
  • 본 논문에서는 기지국(base station: BS)과 릴레이(relay station: RS), 그리고 단말(mobile station: MS) 사이의 릴레이 채널과 액세스 채널의 품질이 서로 다른 양방향 비대칭 채널에서 네트워크 부호화 기법을 위한 변조 방식을 제안한다. 제안하는 변조 방식은 이중 성상도를 기반으로 하고 있으며, RS는 네트워크 부호화된 심볼을 연속된 두 심볼 구간 동안 서로 다른 성상도를 이용하여 BS와 MS로 방송한다. 레일리 페이딩 채널에서 제안하는 변조 방식의 비트 오류율 성능에 대한 상한 식을 수학적으로 유도하고, 기존에 양방향 비대칭 채널에서 네트워크 부호화 기반의 양방향 통신 기법을 위해 제안되었던 혼합 성상도 기반의 변조 방식과 성능을 비교 분석한다. 또한 제안하는 변조 방식을 사용하는 네트워크 부호화 기반의 양방향 통신 기법과 기존의 양방향 통신 기법들의 총 채널 사용 횟수를 비교 분석한다. 모의실험을 통해 제안하는 변조 방식이 양방향 비대칭 채널에서 기존 기법들과 동일한 대역 효율성을 유지하면서도 목표 비트 오류율 $10^{-2}$에서 3.5~4dB의 $E_b/N_0$ 이득이 있음을 보인다.

변두께를 갖는 두꺼운 반구형 쉘과 반구헝체의 3차원적 진동해석 (Three-Dimensional Vibration Analysis of Solid and Hollow Hemispheres Having Varying Thickness)

  • 심현주;장경호;강재훈
    • 한국전산구조공학회논문집
    • /
    • 제16권2호
    • /
    • pp.197-206
    • /
    • 2003
  • 임의의 경계조건과 변두께를 갖는 축대칭 반구형 쉘과 반구형체의 진동수와 모우드형상을 결정하는 3차원적 해석법이 소개되었다. 수학적으로 2차원적인 전통적인 쉘이론과는 달리 본 연구의 해석법은 3차원 동적 탄성방정식을 사용하였다 자오선방향 (Φ), 법선방향(z), 원주방향(θ)으로의 변위성분인 μ/sub Φ/, μ/sub z/, μ/sub θ/는 시간에 대해서는 정현적으로, θ에 대해서는 주기적으로, 와 z 방향에 대해서는 대수다항식으로 표현될 수 있다. 축대칭 반구형 쉘의 변형률 에너지와 운동 에너지를 정식화하고, 리츠법으로 고유치문제를 계산하였다. 진동수의 최소화과정을 통해 엄밀해의 상위 경계치 진동수를 구하였으며, 이 때, 다항식의 차수를 증가시키면 진동수는 엄밀해에 수렴하게 된다. 자오선방향으로 선형적으로 꿩 두께가 변하는 반구형 쉘과 반구형체치 3차원적 진동수를 최초로 계산하였으며, 축방향으로 난 조그만 원추형 구멍이 진동수에 미치는 영향도 분석하였다. 상두께와 자유경계조건을 갖는 두꺼운 축대칭 반구형 쉘에 대한 3차원적 리츠해와 3차원적 유한요소법에 의한 진동수를 서로 비교하였다.

와이어로프로 외부 보강된 철근콘크리트 연속 T형 보의 전단내력 (Shear Capacity of Reinforced Concrete Continuous T-Beams Externally Strengthened with Wire Rope Units)

  • 양근혁;심재일;변항용
    • 콘크리트학회논문집
    • /
    • 제19권6호
    • /
    • pp.773-783
    • /
    • 2007
  • 와이어로프 단위를 이용한 단순한 비 부착형 전단보강 기술이 개발되었다. 제안된 보강 기술에 의해 보강된 연속 T형 보 6개와 동일한 무 보강 시험체가 실험되었다. 고려된 주요 변수는 와이어로프의 양과 프리스트레스이다. 모든 시험체의 기하학적 특성 및 철근 배근을 동일하다. 와이어로프의 프리스트레스로 인한 콘크리트 복부에서의 수직응력 분포가 보의 경사균열 전단내력 및 최대 전단내력에 미치는 영향이 또한 제시되었다. 본 연구의 실험 결과로부터 제안된 보강 기술을 이용하여 철근콘크리트 보의 전단내력 향상 및 연성을 확보하기 위해서는 와이어로프 비는 ACI 기준에서 제시하는 최소 전단철근비의 2.5배 이상, 그리고 프리스트레스는 와이어로프 인장강도의 0.6배 이하로 있어야 함이 제안될 수 있었다. 와이어로프 단위로 보강된 연속 T형 보의 전단내력을 평가하기 위하여 상계치 이론을 이용한 수치해석 모델이 제시되었다. 제시된 수치해석 모델은 ACI 318-05의 전단내력 식에 비해 실험 결과와 잘 일치하였다.

고해상도 SAR 영상처리 고속화를 위한 병렬 성능 최적화 기법 연구 (A Study on Parallel Performance Optimization Method for Acceleration of High Resolution SAR Image Processing)

  • 이규범;김규빈;안솔보름;조진연;임병균;김동현;김정호
    • 한국항공우주학회지
    • /
    • 제46권6호
    • /
    • pp.503-512
    • /
    • 2018
  • SAR(Synthetic Aperture Radar)는 레이더를 이용하여 얻은 신호를 처리해 영상을 획득하는 기술로서, SAR 영상의 활용도와 고해상도 영상에 대한 요구가 증가하고 있는 상황이다. 따라서 본 연구에서는 고해상도 영상 데이터의 고속 처리를 위해 SAR 영상처리 알고리즘을 다중코어 기반의 컴퓨터 구조에서 최적의 성능을 낼 수 있도록 구현하기 위한 연구를 수행했다. 고해상도 영상에 따른 방대한 양의 입출력에 의한 성능 저하를 개선시키기 위해 메모리를 최대한 활용하는 성능 최적화 기법을 적용하고 OpenMP의 동적 스케쥴링 기법과 중첩 병렬성(nested parallelism)을 사용해 코드의 병렬화 비율을 높였다. 그 결과 전체 계산시간을 줄일 뿐만 아니라 병렬 성능의 최대 한계치를 크게 높일 수 있었으며, 제안된 기법을 10개 코어를 가진 다중코어 시스템에 적용한 결과 기존 대비 8배 이상의 성능 향상이 있었다. 본 연구 결과는 대용량 메모리를 가진 다중코어 시스템을 대상으로 하는 고해상도 SAR 영상처리 소프트웨어 개발에 효과적으로 활용될 수 있을 것으로 기대된다.

2차 혼합물 반응표면 모형에서의 강건한 실험 설계 (Robust Designs of the Second Order Response Surface Model in a Mixture)

  • 임용빈
    • 응용통계연구
    • /
    • 제20권2호
    • /
    • pp.267-280
    • /
    • 2007
  • 혼합물 성분들의 비율의 상한과 하한에 대한제한조건이 부과된 제한된 혼합물 실험 공간 R에서의 혼합물 실험을 위한 최적 설계를 찾는 데에 D-, G-, V- 최적기준 등과 같은 다양한 최적 설계 기준이 사용된다. 각각의 실험 설계는 선택된 최적 기준에 대해서는 최적이지만, 제한된 혼합물 실험 공간에서의 예측력에 대해서는 만족스럽지 못하다는 것은 잘 알려진 사실이다. (Vining 등, 1993; Khuri 등, 1999). 우리의 관심사는 2차 혼합물 반응표면모형을 가정한 경우에 제한된 혼합물 공간에서의 효율적인 실험 설계를 찾는 것이다. 이 논문에서는 꼭지점, 선중심점, 면중심점, 중앙점과 내부점으로 구성된 확장된 후보 실험점 그룹을 구성한 다음에, D-최적기준, G-최적기준, V-최적기준과 실험점들 간의 거리에 근거한 U-최적기준에 강건한 실험 설계를 제안한다. Khuri 등(1999)에서 분석된 비료 혼합물 실험과Vining과 Cornell(1993)이 분석한 조명탄 혼합물 실험의 사례에서 강건한 실험설계들과 두 논문에서 추천된 실험 설계들에 대한 예측치의 표준화된 분산의 분위수의 그림(SVPQP)을 비교한 결과 강건한 설계가 상대적으로 우월함이 판명되었다.

옻칠한지의 제조 및 특성 (The Characteristics of Hanji Prepared with Lacquer)

  • 조현진;이상극;노정관
    • 한국펄프종이공학회:학술대회논문집
    • /
    • 한국펄프종이공학회 2007년도 춘계학술대회논문집
    • /
    • pp.380-390
    • /
    • 2007
  • The purpose of this study is to make a functional Hanji treated with an oriental lacquer which has various functionalities. The raw oriental lacquer produced in China was used in this study This lacquer was diluted with ethanol and terpene in different solvent ratios. The diluted lacquer in the solvents had two layers. The upper layer was solvent soluble and the lower contained precipitates. Hanji was treated with the solvent solubles and the mixture containing precipitates, and then properties of the Hanji were evaluated. The oriental lacquer consisted of 25.04% of water, 60% of urushiol, 3.13% of nitrogen-containing compounds, and 5.66% of gum. The pH of oriental lacquer was 5.3 and the viscosity was 1680 cP. The average weight, thickness, and density of Hanji treated with oriental lacquer tended to gradually decreased as the lower concentration of lacquer was used and as the solvent soluble was treated. Tensile strength of the treated Hanji decreased when the diluted lacquer was used and Hanji treated with terpene dilutes at the ratio of lacquer to solvent of 1:5 (v/v) showed higher tensile strength than ones treated with ethanol dilutes. The folding endurance decreased as the less concentrated lacquer was used and the highest value was obtained when 1:40 (v/v) of lacquer to solvent ratio in both ethanol and terpene mixture. Absorption ratio was higher in the Hanji treated with ethanol mixture, treated with the lacquer in higher concentration, and treated with ethanol mixture. Hanji treated with ethanol dilutes at 1:20 (v/v) and the lower ratio of lacquer to solvent showed a hydrophobic property. Amount of the bound dye materials tended to be decreasing as the concentration of lacquer becomes lower and it was higher in Hanji treated with ethanol mixture than with terpene mixture. Color of Hanji treated with the solvent diluted mixture was Y to YR-type, whereas that of Hanji treated with raw oriental lacquer was Y-type, terpene

  • PDF

장기관측자료를 이용한 DOAS와 점측정 분석시스템의 바이어스 구조에 대한 평가 (Compatibility of DOAS and Conventional Point Monitoring System Through an Evaluation of Bias Structures Using Long-term Measurement Data in Seoul)

  • 김기현;김민영
    • 한국대기환경학회지
    • /
    • 제17권5호
    • /
    • pp.395-405
    • /
    • 2001
  • To make an assessment of the compatibility between DOAS and conventional point monitoring system (MCSAM-2: MS2), we investigated the concentrations of three criteria pollutants which include S $O_2$, N $O_2$, and $O_3$from a national monitoring station in Seoul during the periods of June 1999~August 2000. The average concentration values for the whole study period derived from hourly concentration data sets of those three species indicated that the mean differences between the two methods can be approximated as 18%. When the bias structure of two systems was evaluated through the computation of percent difference(PD) between the two such as ( $C_{DOAS}$- $C_{conventional}$ $C_{DOAS}$*100, differences between the two systems appeared to be quite systematic among different compounds. While the mode of bias peaked at 0~20% or 20~40% in terms of PD values, the cause of such positive bias mainly arised from generally enhanced concentration values of DOAS system. The structure of bias among different species was further assessed through linear regression analysis. Results of the analysis indicated that the dominant portions of differences observed from two monitoring systems can be accounted for by the systematic differences in their spanning and zeroing systems. S $O_2$(MS2)=0.6385 S $O_2$(DOAS)+2.0985($r^2$=0.7894) N $O_2$(MS2)=0.6548 N $O_2$(DOAS)+7.437($r^2$=0.7687) $O_3$(MS2)=1.0359 $O_3$(DOAS)-7.7885($r^2$=0.7944) The findings of slope values at around 0.64~0.65 from two species suggest that DOAS should respond more sensitively in upper bound concentration range. The offset values apart from zero indicate that more deliberate comparison needs to be made between these monitoring systems. However, based on the existence of strong correlations from at least 8,000 data points for each species of comparison, we were able to conclude that the compatibility of two monitoring systems is highly significant. With the improvement of calibration techniques for the DOAS system. its applicability for routine monitoring of airborne pollutant species is expected to be quite extendable.

  • PDF