• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.412-417
• /
• 2015

The IMO MEPC has been increasingly strengthening the emission standard for marine environment protection. In particular, nitrogen oxide (NOx) emissions of all ocean-going ships built from 2016 will be required to comply with the Tier-III regulation. In this study, a vanadia based SCR (Selective Catalytic Reduction) system developed for ship application was installed on a diesel engine for power generation of the training ship T/S SAENURI in Mokpo National Maritime University. For the present study, the exhaust pipeline of the generator diesel engine was modified to fit the urea SCR system. This study investigated the NOx reduction performance according to the two kind of injection method of urea solution (40%): Auto mode through the PLC (Programable Logic Control) and Manual mode. We were able to find the ammonia slip conditions when in manual mode method. So, the optimal urea injection quantity can be controlled at each engine load (25, 35, 50%) condition. It was achieved 80% reduction on nitrogen oxide. Furthermore, we found that the NOx reduction performance was better with the load up-down (while down to 25% from 50%) than the load down-up (while up to 50% from 25%) test.

• Journal of KIISE:Information Networking
• /
• v.28 no.4
• /
• pp.611-620
• /
• 2001

To meet the requirements of reliable service for various applications, a Reliable Multicast Transport Protocol should be implemented over IP Multicast where currently best-effort service is provided. Among the current researches, hierarchical tree-based mechanism has been proposed and actively studied. This mechanism is known to provide high scalability as well as reliability, but needs an additional tree configuring mechanism for building an efficient logical tree in transport layer. Bottom-up approach has been used for creating such a tree. This method has benefits from parallel tree construction for receivers, while it has some drawbacks such that it does not guarantee a loop-free tree and brings heavy message overhead during tree creation process. Therefore, this paper proposes a top-down based mechanism for constructing a control tree, which can guarantee loop-freeness by step-wise mannered tree building. From experimental simulations, it shows that the proposed mechanism has less message overhead. It is recommended that the bottom-up and the proposed top-down will be selectively used in real networks, according to the requirements of the concerned multicast applications.

• Journal of Korean society of Dental Hygiene
• /
• v.8 no.3
• /
• pp.107-114
• /
• 2008

The purpose of this study was to examine the awareness of adult patients visiting dental clinics about periodontal diseases. The subjects in this study were 204 patients who paid a visit to five dental clinics and a dental hospital in the region of Jeonju. After a survey was conducted, the results were obtained as follows: 1. With regard to toothbrushing method, the most of the male patients(43.8%) brushed their teeth by rolling the toothbrushes up and down, and the most of the female patients(46.1%) did that both up and down and right and left. As to the influence of smoking, the largest number of the smokers(50.0%) and nonsmokers(40.4%) brushed their teeth both up and down and right and left. statistically significant differences were shown by gender and smoking(p<0.05). 2. As for knowledge acquisition route on periodontal diseases by gender, there was no way for the men(38.2%) to get the information, and the largest number of the women (43.4%) acquired the information through the internet. With respect to smoking, the largest numbers of the smokers(38.2%) and nonsmokers(37.5%) got the information by the internet, and statistically significant differences were found (p<0.05). 3. Concerning treatment method of periodontal diseases provided by the dental clinic, the largest number of the men(33.7%) got their teeth scaled, and the greatest group of the women(29.6%) had their gums treated. The treatment method made statistically significant differences by gender (p<0.05). Regarding smoking, the largest group of the smokers(32.4%) had their teeth scaled, and the largest number of the nonsmokers(28.7%) got their gums treated. significant differences were made statistically by smoking (p<0.05). 4. As to instruction on the prevention of periodontal diseases, the largest group(63.2%) intended to take that. The second (23.0%) was eager to do it, and the third(13.8%) was unwilling to do it.

• Computers and Concrete
• /
• v.24 no.2
• /
• pp.159-172
• /
• 2019

This paper presents an investigation into the flexural behavior of reinforced concrete (RC) beams retrofitted by ultra-high performance fiber-reinforced concrete (UHPFRC) layers. The experimental study has been conducted in two parts. In the first part, four methods of retrofitting with UHPFRC layers in both the up and down sides of the beams have been proposed and their efficiency in the bonding of the normal concrete and ultra-high performance fiber-reinforced concrete has been discussed. The results showed that using the grooving method and the pre-casted UHPFRC layers in comparison with the sandblasting method and the cast-in-place UHPFRC layers leads to increase the load carrying capacity and the energy absorption capacity and causes high bond strength between two concretes. In the second part of the experimental study, the tests have been conducted on the beams with single UHPFRC layer in the down side and in the up side, using the effective retrofitting method chosen from the first part. The results are compared with those of non-retrofitted beam and the results of the first part of experimental study. The results showed that the retrofitted beam with two UHPFRC layers in the up and down sides has the highest energy absorption and load carrying capacity. A finite element analysis was applied to prediction the flexural behavior of the composite beams. A good agreement was achieved between the finite element and experimental results. Finally, a parametric study was carried out on full-scale retrofitted beams. The results indicated that in all retrofitted beams with UHPFRC in single and two sides, increasing of the UHPFRC layer thickness causes the load carrying capacity to be increased. Also, increases of the normal concrete compressive strength improved the cracking load of the beams.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.3
• /
• pp.43-50
• /
• 2021

On the construction of new roads, the cut slope is inevitable and thus has been widely applied in the mountainous area. Particularly, the retaining wall with the precast concrete panel is often selected for its higher stability and mostly constructed in bottom-up method. However, the bottom-up method results in steeper slope as 1:0.05 before constructiong retaining wall and thus causes poor compaction at backfill which may induce instability during or after the construction. To overcome this problem, precast concrete panel retaining wall was attached in-situ ground (so called top-down). This paper presents the evaluation of drainage capacity of top-down method which has impermeable layer between panel and mortar being used to increase the ability of attachment of the precast concrete panel.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.9
• /
• pp.2366-2377
• /
• 1997

An Adaptive Usage Parameter Control(UPC) mechanism using a Variable Token Pool(VTP) which is kind of preventive traffic control in the Asynchronous Transfer Mode(ATM) networks is described. The VTP mechanism can monitor violations of the average bit rate and burst duration as well as peak bit rate for the ON-OFF type traffic. The VTP can vary the token pool size by monitoring burst duration and silence duration for a long term. It also improves the sensitivity against the violation of burst duration and average bit rate and enables to response for the violating traffic situation quickly. The variable token pool size is varied in step size by every burst duration and silence duration. Two important parameters for controlling token pool size are Down_size and Up_size. We compare the performance of LB and JW mechanism with the proposed VTP mechanism by computer simulations. We have known that the proposed method is more effective than the previous mechanisms. It is shown that the cell loss rate of the VTP quite depends on the value of Down_size and Up_size. The two parameters should be decided as a propr value according to traffic situations.

• Journal of Yeungnam Medical Science
• /
• v.40 no.2
• /
• pp.187-192
• /
• 2023

Background: This study aimed to present the short- and midterm outcomes after complete atrioventricular canal defect (CAVC) repair using a single-patch technique. Methods: This study included 30 children who underwent surgical correction of the CAVC using a single-patch technique. Results: The median age of the patients was 5.7 months (interquartile range [IQR], 5.0-7.5 months), and 23 patients (76.7%) had type A CAVC. Fourteen patients (46.7%) were female and 17 (56.7%) had been diagnosed with Down syndrome. The in-hospital mortality rate was 0%. No deaths were observed during a median follow-up of 4 years (IQR, 3.5-5.0 years). Patients without Down syndrome were associated with late moderate mitral regurgitation (MR) (p=0.02). Late MR less than moderate degree was observed in 96.6%, 78.5%, and 50% of patients after 2, 4, and 5 years of follow-up, respectively, while late tricuspid valve regurgitation less than moderate degree was observed in 96.7%, 85.9%, and 59.0% of patients after 2, 4, and 6 years of follow-up, respectively. After a median follow-up of 4 years, only one patient had required surgical repair of a left ventricular outflow tract obstruction, which occurred 26 months after the first operation. Multivariable logistic regression analysis adjusted for the type of CAVC, sex, Down syndrome, age, and weight revealed that the absence of Down syndrome was a risk factor for late moderate MR (MR-2) (odds ratio, 0.05; 95% confidence interval, 0.006-0.50; p=0.01). Conclusion: A single-patch technique for CAVC surgical repair is a safe method with acceptable short- and midterm results.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.16 no.5
• /
• pp.209-214
• /
• 2021

Panoptic segmentation, which is now widely used in computer vision such as medical image analysis, and autonomous driving, helps understanding an image with holistic view. It identifies each pixel by assigning a unique class ID, and an instance ID. Specifically, it can classify 'thing' from 'stuff', and provide pixel-wise results of semantic prediction and object detection. As a result, it can solve both semantic segmentation and instance segmentation tasks through a unified single model, producing two different contexts for two segmentation tasks. Semantic segmentation task focuses on how to obtain multi-scale features from large receptive field, without losing low-level features. On the other hand, instance segmentation task focuses on how to separate 'thing' from 'stuff' and how to produce the representation of detected objects. With the advances of both segmentation techniques, several panoptic segmentation models have been proposed. Many researchers try to solve discrepancy problems between results of two segmentation branches that can be caused on the boundary of the object. In this survey paper, we will introduce the concept of panoptic segmentation, categorize the existing method into two representative methods and explain how it is operated on two methods: top-down method and bottom-up method. Then, we will analyze the performance of various methods with experimental results.

• Journal of KIISE:Databases
• /
• v.29 no.5
• /
• pp.367-380
• /
• 2002

Due to recent increase in applications requiring huge amount of data such as spatial data analysis and image analysis, clustering on large databases has been actively studied. In a hierarchical clustering method, a tree representing hierarchical decomposition of the database is first created, and then, used for efficient clustering. Existing hierarchical clustering methods mainly adopted the bottom-up approach, which creates a tree from the bottom to the topmost level of the hierarchy. These bottom-up methods require at least one scan over the entire database in order to build the tree and need to search most nodes of the tree since the clustering algorithm starts from the leaf level. In this paper, we propose a novel top-down hierarchical clustering method that uses multidimensional indexes that are already maintained in most database applications. Generally, multidimensional indexes have the clustering property storing similar objects in the same (or adjacent) data pares. Using this property we can find adjacent objects without calculating distances among them. We first formally define the cluster based on the density of objects. For the definition, we propose the concept of the region contrast partition based on the density of the region. To speed up the clustering algorithm, we use the branch-and-bound algorithm. We propose the bounds and formally prove their correctness. Experimental results show that the proposed method is at least as effective in quality of clustering as BIRCH, a bottom-up hierarchical clustering method, while reducing the number of page accesses by up to 26～187 times depending on the size of the database. As a result, we believe that the proposed method significantly improves the clustering performance in large databases and is practically usable in various database applications.

• Journal of the Korea Computer Graphics Society
• /
• v.17 no.1
• /
• pp.39-44
• /
• 2011

In this paper, we introduce a novel method to reduce image to a small size, such that the quality of the image is improved when it is up-scaled. Recent hardwares including cameras and display devices allow us to capture and display high-resolution images. However, it is not always realistic to store and transmit those high-resolution images due to limitation of storage and network bandwidth. Therefore, high-resolution images are often down-scaled to be stored and transmitted, and then up-scaled back for display. To improve final image quality in this scenario, we first formulate selected up-scale methods as linear transformations. The optimal reduction methods are obtained as its inverse transformation. Based on this basic idea, we develop down-scale kernel that is optimized for each up-scale method. In our experiment, the proposed method could improve the quality of the up-scaled image noticeable.