• The Research Journal of the Costume Culture
• /
• v.3 no.2
• /
• pp.425-448
• /
• 1995

The purpose of this study was to compare fur clothing preferences of Korean and Russian women, and then to provide a beneficial data to Koran fur manufacturers who is working in Korea and advancing into Russia. 346 subjects were gather in Seoul and Moscow through convenience sampling method, and frequency, percentage, mean, x²-test, t-test were conducted for data analysis. The results were as follows: 1. Korean and Russian women's fur clothing buying motives, information sources, important factors on purchasing, purchasing, influences ere generally examined. 2. Russian women's fur clothing possession rate as well as fur clothing purchasing intention in the future were higher than Korean women's. 3. Fur clothing item, material, color, style, length which Korean and Russian women prefer were compared. 4. In case of shilhouette, Russia women showed high preference on swinger shilhouette, relatively Korean women preferred H-line. 5. In case of collar design, Russian women showed high preference on stand collar, relatively Korean women preferred notch collar or shawl collar. 6. In case of sleeve design, Russian women showed high preference on turn back cuffs sleeve, relatively Korean women preferred push-up sleeve.

• Journal of Environmental Science International
• /
• v.8 no.2
• /
• pp.197-204
• /
• 1999

The extent of heavy metal pollution in agricultural in soils near the abandoned mine land site was investigated using their concentrations from the 47 sampling sites in B mine. Samples were prepared using 0.1N HCI - Korean Standard Methods - and then analysed for Cd, Cu, Pb, As and Cr by Inductively Coupled Plasma Spectrometer. In addition, soil and mine tailing samples were sequentially extracted to investigate the chemical speciation of heavy metals in them. The soils in the vicinity of mining area are highly contaminated by heavy metals ranging up to 5.96mg Cd/kg, 253.3mg Cu/kg, 76.7mg Pb/kg, and 15.45 mg As/kg, according to the analysis of Korean Standard Methods. The heavy metal levels by the sequential extraction are much higher than its level by Korean Standard Methods, and little correlated with each other. Based on the results, it is suggested that the As pollution in agricultural soils near the AMLS should be dealt as of prior significance in establishing reclamation strategies for the area.

• Preventive Nutrition and Food Science
• /
• v.3 no.3
• /
• pp.230-233
• /
• 1998

Acetic acid producing bacteria were isolated from deastringent persimmon vinegar and the major bacterium was identified using morphological and biochemical tests. Acetobacter sp. AH-1 was motile, gram negative rod with catalase positive and oxidase negative. The strain can grow up to 5 % ethanol and 2% NaCl as well as 25% glucose. Optimum temperature and pH for growth were 3$0^{\circ}C$ and 5.0, respectively. Volatile constituents of persimmon vinegar were analyzed by purge and trap sampling . Acetic acid adn alcohol were the largest volatile compounds quantitiatively in persimmon vinegar. Among alcohols, 20methyl-1-propanol, isoamyl alcohol and amyl alcohol were detected. Isovaleradehyde and benzaldehyde for aldehyde, isoamyl acteate, ethyl formate, propyl aceetate, and ethyl acetate for esters were likely to contribute to persimmon vivegar flavor.

• Journal of the Korea Institute of Building Construction
• /
• v.5 no.4 s.18
• /
• pp.131-137
• /
• 2005

Lately Construction industry has been depressing by hard construction market circumstance. Construction company, especial at this time, makes more rationalize the management of inside Company and Construction field. In this study we are to present the method of calculation reasonable duration at Reinforced Concrete Work. For the study first make up a question at field workers, then sampling the Form workers based the question. Second, We are using Work Analysis Method analysing the worker's work-method and Time. And then using the result of analysis, measure the Productivity of Form work. The productivity of Form work is used the basic data of duration at Reinforced Concrete Work

• Journal of Korean Society on Water Environment
• /
• v.24 no.2
• /
• pp.214-220
• /
• 2008

Nitrifying bacteria were detected by fluorescent in situ hybridization (FISH) method at 6 sampling sites with different eutrophication degree in the Nak-Dong River and their tributaries. And conventional physico-chemical parameters including $NH_4-N$, $NO_3-N$, and TN were determined concurrently. In rainy period (July), there was no noticeable difference between the number of ammonia/nitrite-oxidizing bacteria detected at each site except Sang-Ju and the ratio of nitrifying bacteria to total counts stained by DAPI varied in 6~33%. By contrast, in the dry period (October), both of bacterial population was increased differently and the ratio of nitrifying bacteria to total counts ranged more widely from 6% in heavily polluted water zone, Hwa-Won to 60% in upper tributary with high agricultural land use. Byung-Sung-Chun. In January, the numbers of ammonia-oxidizing bacteria was reduced up to one tenth, while those of nitrite-oxidizing bacteria was apparently increased maybe due to high DO and low DOC.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.550-553
• /
• 2005

To acquire radar target signature, various kinds of target are necessary. Measurement is one of the data acquiring method, but much time and high cost is required to get the target data from the real targets. Even if we can afford that, the targets we can access are very limited. To obtain target signatures avoiding these problems, we build the target CAD (Computer Aided Design) model for the calculation of target signatures. To speed up RCS calculation, we applied adaptive super-sampling and tested quite complex tank CAD model which is 1.4 hundred of thousands facet. We use calculated RCS data for ID range profile and 2D ISAR (Inverse Synthetic Aperture Radar) image formation. We adopted IFFT (Inverse Fast Fourier Transform) algorithm combined with polar formatting algorithm for the ISAR imaging. We could confirm the possibility of the construction of database from the images of CAD models for target classification applications.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.1041-1044
• /
• 1992

A solar cell should be operated at the maximum output point on the I-V characteristic curve with constant current and constant voltage in order that the solar energy be fully utilized. According to, in this paper, we describes a controller which can track the maximum power point of a solar arry using current and voltage ripple variation of step up chopper system. The control circuit is desinged such that actual current and voltage are sensed directly from the solar cell array. These two signal are then holded sampling and multiplies by a single chip multiplier.

• International Journal of Precision Engineering and Manufacturing
• /
• v.4 no.1
• /
• pp.9-14
• /
• 2003

In this study we suggest real-time simulator that could describe rent system without ordinary DSP card. This simulator is composed of 80196kc-16bit ordinary microprocessor, which is widely used up to now and personal computer. DSP card that has calculated complex numerical equation is replaced by personal computer and 80196kc generates control signals independently out of the personal computer. In all process personal computer is synchronized with one-board microprocessor (80196kc) within sampling time in the closed loop system. This makes it possible to be described in hydraulic servo system in real time.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.11
• /
• pp.91-100
• /
• 2007

Many manufacturing devices must execute motions as quickly as possible to achieve profitable high-volume production. Most of them have devices having flexibility and a time delay of one sampling is added to the plants when they are controlled by fast discrete controllers, which brings about non-minimum phase zeros. This paper develops a control strategy that combines feedforward and feedback control with command shaping for such devices. First, the feedback controller is designed to increase damping and eliminate steady-state error. Next, the feedforward controller is designed to speed up the transient response. Finally, an appropriate reference profile is generated using command-shaping techniques to ensure fast point-to-point motions with minimum residual vibration. The particular focus of the paper is to understand the interactions between these individual control components. The resulting control strategy is demonstrated on a model of a high-speed semiconductor manufacturing machine.

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.2
• /
• pp.151-157
• /
• 1996

Vehicle occupant exposure to volatile organic compounds (VOCs) continues to be the subject of active research because of higher levels of VOCs in vehicles than in the surrounding ambient atmosphere and because of potential health risk. This study identified in-auto and in-bus exposures to 6 selected aromatic VOCs during rush-hour driving. A bus service route was selected to include an urban route (Taegu) and a suburban route (Hayang-Up) to satisfy the specified criteria of this study. The most abundant VOC concentration measured in this study was toluene. In-vehicle target Voc concentrations of the urban route were significantly different from those of the suburban segment. On the sum of average of the target VOCs, in-auto VOC concentration was about 1.5 times higher than in-bus VOC concentration. Based on the sum of average, in-automobile target VOC concentrations of this study were within the range of previous studies conducted in several cities of the United States, while in-bus VOC concentrations of this study were much lower than those of Taipei in Taiwan. In-vehicle VOC concentrations of present study significantly varied with sampling days, while they did not varied with driving period.