• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.12
• /
• pp.57-63
• /
• 2002

In this paper, the feedforward control with least mean square (LMS) adaptive algorithm is proposed and examined to reduce rotating error by runout of an active magnetic bearing system. Using eddy-current type gap sensor fur control, the electrical runout caused by non-uniform material properties of sensor target produces rotational error amplified in feedback control loop, so this runout should be eliminated to increase rotating accuracy. The adaptive feedforward controller is designed and examined its tracking and stability performances numerically with established frequency response function. The tested grinding spindle system is manufactured with a 5.5 ㎾ internal motor and 5-axis active magnetic bearing system including 5 eddy current gap sensors which have approximately 15 ~ 30 ${\mu}{\textrm}{m}$ of electrical runout. According to the experimental analysis, the error signal in radial bearings is reduced to less than 5 ${\mu}{\textrm}{m}$ when it is rotating up to 50,000 rpm due to applying the feedforward control for first order harmonic frequency, and vibration of the spindle base is also reduced about same frequency.

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.10 no.1
• /
• pp.13-19
• /
• 2010

Bruxism is nonfunctional jaw movement that includes clenching, grinding and gnashing of teeth. It usually occurs during sleep, but with functional abnormality of brain, it can be seen during consciousness. Oromandibular dystonia (OMD) can involve the masticatory, lower facial, and tongue muscles and may result in trismus, bruxism, involuntary jaw opening or closure, and involuntary tongue movement. Its prevalence in the general population is 21%, but its incidence after brain injury is unknown, Untreated, bruxism and OMD cause masseter hypertrophy, headache, temporomandibular joint destruction and total dental wear. We report a case of successful treatment of bruxism and OMD after brain injury treated with botulinum toxin A and occlusal appliance. The patient was a 59-year-old man with operation history of frontal craniotomy and removal of malformed vessel secondary to cerebral arteriovenous malfomation. We injected with a total 60 units of botulinum toxin A each masseteric muscle and took impression for occlusal appliance fabrication under general anesthesia. On follow up 2 weeks and 2 months, the patient remained almost free of bruxism. We propose that botulinum toxin A and occlusal appliances be considered as a treatment for bruxism and OMD after brain injury.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.2
• /
• pp.19-25
• /
• 2005

In this paper, the feedforward control with least mean square (LMS) adaptive algorithm is proposed and examined to reduce rotating error by runout of an active magnetic bearing system. Using eddy-current type gap sensors for control, the electrical runout caused by non-uniform material properties of sensor target produces rotational error amplified in feedback control loop, so this runout should be eliminated to increase rotating accuracy. The adaptive feedforward controller is designed and examined its tracking performances and stability numerically with established frequency response function. The designed feedforward controller was applied to a grinding spindle system which is manufactured with a 5.5 kW internal motor and 5-axis active magnetic bearing system including 5 eddy current gap sensors which have approximately 15∼30㎛ of electrical runout. According to the experimental results, the error signal in radial bearings is reduced to less than 5 ,Urn when it is rotating up to 50,000 rpm due to applying the feedforward control for first order harmonic frequency, and corresponding vibration of the spindle is also removed.

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.413-415
• /
• 2000

Piezoelectric ceramics of PZT have been developed to apply for transformers in notebook. Use of piezoelectric ceramics in applications like piezoelectric transformers was made possible by the development of new materials with high electromechanical coupling coefficients and high mechanical quality factor. "Hard" ferroelectiric ceramics of complex composition based on lead zirconate titanate with Mn additive have been prepared. The perovskitic phase reaction of the oxides. The crucial role played by the intermediate mixing and grinding procedures in the assessment of the final properties of the material was investigated. Densification up to approximately the theoretical density value was achieved. The polarization was obtained by subjecting the samples at $30kVcm^{-1}$ poling electric field, in a silicon oil bath heated at $110^{\circ}C$. Their microstructural and morphological properties were checked by X-ray diffraction analysis and scanning electron microscopy. The optimized samples presented very high qualify and electromechanical coupling factors, together with small dielectric loss.

• Korean Journal of Materials Research
• /
• v.19 no.12
• /
• pp.661-666
• /
• 2009

Froth flotation has been carried out in order to produce roasting-molybdenite concentrate from molybdenite ore in the Shin-yeomi mine. In our study, roasting-molybdenite (Mo 0.43%) from Shin-yeomi mine was recovered by varying the conditions of regrinding time, dosage of collector and alkalinity. Liberation and flotation efficiency more were effective at regrinding time of six minutes than at single grinding. Mo recovery curves increased considerably as dosage of kerosene increased, whereas Mo grade curves decreased gradually. The separation efficiency of molybdenite was effective when the dosage of collector (kerosene) was adjusted to 300 g/t. The molybdenite concentrate was agglomerated in the range of pH 5-7 and its separation efficiency increased to pH 9-10. The concentrate of 49.5% Mo grade ($MoS_2$, 82.6%) with 81.5% recovery from Shin-yeomi molybdenite ores was obtained under conditions of 20% pulp concentration, 300 g/t kerosene 325 g/t frother (AF65), 2.5 kg/t depressant ($Na_2SiO_3$), pH 9-10 and four cleaning times. In the future, a trial run that can separate up to 50% Mo grade from Shin-yeomi molybdenite ores will be performed.

• Clinical and Experimental Pediatrics
• /
• v.48 no.4
• /
• pp.433-437
• /
• 2005

Bezoars are concretions commonly found in the stomach and small bowel, and four types of bezoars have been described based on their composition : trichobezoar, phytobezoar, lactorbezoar, and miscellaneous. Bezoars most often develop after gastric operations that alter the motility, emptying, and grinding of food in the stomach. Trichobezoars are most common in female children with normal gastrointestinal function and are usually associated with pica, mental retardation, and psychiatric disorders. Although uncommon, bezoars are a well-recognized cause of chronic abdominal complaints which, when undiagnosed, can result in serious complications including gastric ulceration, bleeding, perforation, intussusception and small bowel obstruction. Mortality rates of up to 30 percent have been reported in adults. Trichotillomania is behaviors surrounding hair-pulling, including stroking and playing with hair before pulling, or biting and swallowing the hair after it has been pulled(trichophagia). The most notorious of the medical sequelae of trichotillomania is the trichobezoar. We experienced a case of trichobezoar in an 11-year-old girl who frequently swallowed her hairs from age 4 years up to age 7 years, resulting in intermittent abdominal pain, nausea, and vomiting.

• Korean Journal of Food Science and Technology
• /
• v.23 no.6
• /
• pp.732-738
• /
• 1991

Corsoy 79 soybeans were ground into 8-(coarse) and 24-mesh (fine) full-fat soy flours. From the particle size analysis, the 8-mesh full-fat soy flours were found to have larger values for geometric mean diameter and geometric standard deviation. However, the distribution moduli of coarse and fine soy flours were similar and indicated soybeans were nearly 'brittle'. Development of hydrolytic and oxidative rancidities of coarsely and finely ground full-fat soy flours were followed from grinding to 24 hrs later. No increases in peroxide value and conjugated dienes in the oil and hexanal content in the headspace of the flour were observed when the moisture was 10.7% or less. At 14.9% moisture and above, lipid oxidation increased with increased moisture content and storage time. Free fatty acid contents increased slightly at all moisture contents. However, hydrolysis did not exceed 0.06% over the moisture range of 4 to 18%, which is of little practical significance. Fine grinding increased oxidative and hydrolytic rancidities, especially at 14.9% moisture and above. these findings indicate that raw soybeans can be ground to full-fat soy flours and stored up to 24 hrs without undergoing significant lipid and flavor deterioration if the moisture content is 11% or less.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.7
• /
• pp.343-352
• /
• 2016

Effects of grinding time and chemicals dosage in arsenic removal from contaminated paddy soil in China were investigated using lab scale attrition and froth flotation combining process. Arsenic concentration in the field soil was 76.51 mg/kg, exceeding Korean and Chinese standards, and predominant arsenic compounds fraction in sequential extraction was "residual" (over 80%). After wet sieving, soil with >2 mm and < 0.038 mm showed concentration lower than 'Warning Level' in Korea. Soil with 0.038-0.075 mm, showing the highest concentration, was discarded since it occupied minor weight fraction (10.1%). Thus soil between 0.075 and 2 mm was only used in the combining process. The highest Arsenic concentration in progeny fragments smaller than 0.038 mm reached up to 981.66 mg/kg after 5 min of attrition. Optimal dosage of collector ($C_5H_{11}OCS_2K$) and modifier ($Na_2S$ and $CuSO_4$) in froth flotation process for the selective separation of the chipped progeny particles from the parent fragments were determined both as 200 g/ton. Arsenic removal efficiency in froth flotation process was 38.47% and it was increased to 72.74% in additional flotation process, scavenging. Average arsenic concentration after overall process - wet sieving, attrition and froth flotation - was estimated to 16.45 mg/kg.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.356-364
• /
• 2007

The purpose of this study was to assess the background color-interceptive ability ana opacity of opaque shade composites (Universal composite, Filtek Z350, Charisma, Clearfil ST, Palpaque Estelite, Esthet-X, and Metafil Flo). Twenty four background specimens (diameter 5.5 mm, thickness 3.0 mm) with Root dentin Mustard (Bisco, Schaumburg, IL, USA) were made. The CIE $L^*a^*b^*$ value of background specimens was measured by a spectrophotometer (Spectrolino, GretagMacbeth, Regensdorf, Switzerland). Three specimens in every group were filled on the background specimens. The surface color of samples was measured by a spectrophotometer in 3.0 mm and every thickness to 0.5 mm while grinding. The color difference in the background color along with 3.0 mm specimen gauged the masking effect in each thickness while grinding and polishing. The opacity was calculated in 1 mm thick specimens. The opacity was in the decreasing order of Clearfil ST, Metafil Flo, Filtek Z350, Palpaque Estelite, Universal composite, Charisma, and Esthet-X (p < 0.05). As the thickness get reduced, $L^*$ value showed decreasing, $a^*$ increasing tendency. The surface color difference between pair of the 3.0 mm thick specimen and after grinding in same opaque resin was above 3.3 except Clearfil ST and Metafil Flo. The color difference (${\Delta}E^*$) between pair of background specimen and opaque resin built-up specimen showed more than 10.0 regardless kinds and thickness. The variance in opacity characteristics and color of the opaque composites is dependent upon manufacturer. When using the opaque resin, the optical properties of each material must be considered as well as cavity.

• Journal of Environmental Health Sciences
• /
• v.41 no.5
• /
• pp.327-334
• /
• 2015

Objectives: In order to review both the effects of sewage sludge dewaterability and deodorizing ability in the existing advanced sewage treatment process, BIO-CLOD (a solidified mixture of 10% Bacillus concentrate and inorganics) was used as an inorganic conditioner effective for deodorization treatment in addition to the removal of organic matter and nutritive salts. Methods: Sludge dewaterability was evaluated using specific resistance to filtration (SRF) experiments with six agitators and two types of commercially available BIO-CLOD; one that is made by grinding solid matter (powdered BIO-CLOD) and one that has been obtained by sieving a separation with a particle diameter of 100 mesh (100 mesh BIO-CLOD). For deodorization odor treatment experiments, 20 g of commercially available solid BIO-CLOD was submerged in four liters of sewage sludge and mixed and agitated for 45 days. Results: When BIO-CLOD was injected into sewage sludge to experimentally compare specific resistance to filtration (SRF), the optimum amount of BIO-CLOD to be injected was shown to be 2% w/v and the SRF value in this case was $1.35{\times}10^{12}m/kg$. pH changes following BIO-CLOD injection were within 6.5-7.0. By 14 days after submerging BIO-CLOD into the sewage sludge to evaluate its deodorizing ability, $H_2S$ decreased by 68% and methyl mercaptan decreased by 74%. By 45 days after the submergal, both items decreased by 100%, indicating deodorizing ability. Conclusion: To compare the levels of dewaterablity of sewage sludge at different particle sizes of inorganic conditioner, powdered BIO-CLOD, particle size 100 mesh BIO-CLOD, and bentonite were tested. It could be seen that as the powdered BIO-CLOD increased, the precipitability increased up to 62% in 30 minutes. As an inorganic conditioner, BIO-CLOD was identified as a stable sludge conditioner that does not affect pH.