• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.4
• /
• pp.227-234
• /
• 2009

Using a finite volume ocean circulation model based on an unstructured grid (FVCOM), we studied the structure of a fresh water bulge that influences on the Region Of Freshwater Influence. Fresh water discharged a river forms a coastal boundary current to the righthand side and a cyclonically circulation freshwater bulge that grows with time. In the middle of the bulge, vertical motions bring fresh water to the bottom. When tidal motions are included, the bulge disappears while the boundary currents becomes wider. Through a simple comparison of areas occupied low salinity water we quantified vertical and horizontal mixing due to the tide and showed that the tidal motion enhances the vertical mixing. During the first few tidal cycles right after the onset of the river discharge, due to tidal excursion the horizontal mixing becomes stronger. The vertical mixing by the tide mixes the fresh water After a certain time the water around the river mouth is well mixed and the horizontal excursion of the fresh water near the river mouth does not have much effect on the horizontal mixing. When there is no tidal motion horizontal mixing is mainly by the inertial instability at the surface and the horizontal mixing becomes stronger over time.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1634-1638
• /
• 2008

하천의 2차원 흐름 해석, 유사이동 해석, 오염확산 해석을 위한 유체의 수치해석법에는 유한요소법, 유한차분법, 유한차분법의 변형인 유한체적법, 경계적분법 등이 있다. 유체에 대한 수치해석 기법으로 전통적으로 가장 많이 사용되고 있는 방법은 유한차분법이지만, 비구조적 요소망(unstructured mesh)을 이용하여 복잡한 형상을 표현하기가 상대적으로 용이한 유한요소법이 다양한 형태의 하천 해석에는 더욱 적합할 것이다. 본 연구에서는 비구조적 요소망을 advanced front method를 이용하여 생성해 보았다. Advanced front method는 해석하고자 하는 영역에 적절한 절점들을 생성한 후 삼각 요소망을 구성하는 grid based advanced front method와 절점들을 생성하지 않고 해석 영역에 삼각 요소를 바로 구성하는 element based advanced front method로 나눌 수 있다. Grid based advanced front method에서 해석 영역에 적절한 절점을 생성하는 방법으로는 일반적인 격자 구조의 절점 생성 방법을 적용하였으며 경계와의 거리가 가까운 절점은 생성되지 않으며, 삼각 요소를 구성할 때에는 두 개의 인접 절점을 비교하여 최적의 삼각 요소를 구성하게 된다. 단 두 개의 인접 절점만을 비교함으로서 비교적 빠른 시간 안에 최적의 삼각 요소망을 구성할 수 있다. 삼각 요소망을 생성한 후에는 Laplacian smoothing을 이용하여 삼각 요소망의 형질을 개선하였다. Element based advanced front method는 외부 경계에서부터 시작된 Front가 내부 영역으로 확대되어지며 각 Front에서 적절한 절점을 직접 생성하여 바로 삼각 요소를 구성하게 된다. Front에서 생성된 절점은 인접 절점들이 있는지 검색하여 인접 절점이 있다면 생성된 절점은 삭제되어지며 인접 절점이 삼각 요소를 위한 나머지 한 점으로 채택되어진다. Front는 외부 경계와 교차되어지지 않아야 하며 또한 연속된 Front를 효율적으로 관리하기 위해 list 자료 구조를 활용하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.3
• /
• pp.233-240
• /
• 2017

The flowfield around transonic wing-body configuration was simulated using in-house CFD code and compared with the experimental data to understand the influence of several features of CFD(Computational Fluid Dynamics) ; grid dependency, turbulence models, spatial discretization, and viscosity. The wing-body configuration consists of a simple planform RAE Wing 'A' with an RAE 101 airfoil section and an axisymmetric body. The in-house CFD code is a compressible Euler/Navier-Stokes solver based on unstructured grid. For the turbulence model, the $k-{\omega}$ model, the Spalart-Allmaras model, and the $k-{\omega}$ SST model were applied. For the spatial discretization method, the central differencing scheme with Jameson's artificial viscosity and Roe's upwind differencing scheme were applied. The results calculated were generally in good agreement with experimental data. However, it was shown that the pressure distribution and shock-wave position were slightly affected by the turbulence models and the spatial discretization methods. It was known that the turbulent viscous effect should be considered in order to predict the accurate shock wave position.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.70.2-70.2
• /
• 2014

We developed a three-dimensional (3D) magnetohydrodynamic (MHD) simulation code to reproduce the structure of a solar wind and the propagation of a coronal mass ejection (CME) through it. This code is constructed by a finite volume method based on a total variation diminishing (TVD) scheme using an unstructured grid system (Tanaka 1994). The grid system can avoid the singularity arising in the spherical coordinate system. In this study, we made an improvement of the code focused on the propagation of a CME through a solar wind, which extends a previous work done by Nakamizo et al. (2009). We first reconstructed a solar wind in a steady state from physical values obtained at 50 solar radii away from the Sun via an MHD tomography applied to interplanetary scintillation (IPS) data (Hayashi et al. 2003). We selected CR2057 and inserted a spheromak-type CME (Kataoka et al. 2009) into a reconstructed solar wind. As a result, we found that our simulation well captures the velocity, temperature and density profiles of an observed solar wind. Furthermore, we successfully reproduce the general characteristics of an interplanetary coronal mass ejection (ICME) obtained by the Helios 1/2 spacecraft (R. J. FORSYTH et al. 2006).

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06d
• /
• pp.208-210
• /
• 2006

그리드 환경에서는 원격의 이질적인 자원들을 서로 공유하며 상호 접근이 가능하도록 하여 사용자의 작업을 처리 할 수 있는 메커니즘을 제공한다. 하지만 각 노드들은 그리드에 자유롭게 참여 및 탈퇴가 가능하다는 점에서 P2P 네트워크 구조와 매우 유사하기 때문에 기존의 병렬처리 컴퓨터에서의 부하 균형문제와는 다른 특징을 갖게 된다. 본 논문에서는 동적인 자원 구성의 특징을 갖는 그리드 컴퓨팅 환경에서 발생할 수 있는 부하 균형 문제를 정의하고 이를 해결하기 위해 조정 노드(coordinating node)라고 불리는 부하 탐지 모듈을 설계 및 구현한다. 본 논문에서 제안된 조정 노드는 동적으로 변화하는 그리드 자원들의 상태를 실시간으에 탐지하게 되며 각 노드들이 네트워크에 새롭게 참여/탈퇴하여 네트워크 위상이 변화하는 경우에도 부하 균형을 달성 하게 된다.

• Journal of computational fluids engineering
• /
• v.15 no.1
• /
• pp.81-87
• /
• 2010

In this study, we conducted resistance and propulsion performance test of ship composed of the Resistance Test, Propeller Open Water Test and Self Propulsion Test using the CFD(Computational Fluid Dynamics). We used commercial RANS(Reynolds Averaged Navier Stokes equation) solver, as a calculating tool. The unstructured grids were used in a bow and stern of ship, having complex shape, for a convenience of generating grids, and the structured grids were adopted in a central hull and rest of hull having a relatively simple shape which is called hybrid grid method. In addition, The sliding mesh method was adopted to rotate a propeller directly in the Propeller Open Water and Self Propulsion Test. The Resistance Test and Self Propulsion Test were calculated using Volume of Fluid (VOF) model and considering a free surface. And all The three cases were applied realizable k-epsilon model as the turbulence model. The results of calculations were verified for the suitability of calculations by comparing MOERI's EFD results.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.2
• /
• pp.147-154
• /
• 2003

A three-dimensional numerical analysis of the flow and heat transfer characteristic of wood-flour-filled polypropylene melt in an extrusion die was carried out. Used for this analysis were Finite Concept Method based on FVM, unstructured grid and non-Newtonian fluid viscosity model. Temperature and flow fields are closely coupled through temperature dependent viscosity and viscous dissipation. With large Peclet, Nahme, Brinkman numbers, viscous heating caused high temperature belt near die housing. Changing taper plate thickness and examining some predefined parameters at die exit investigated the effect of taper plate on velocity and temperature uniformities. In the presence of taper plate, uniformity at die exit could be improved and there existed an optimum thickness to maximize it.

• Journal of computational fluids engineering
• /
• v.5 no.1
• /
• pp.1-7
• /
• 2000

In general, FDM(finite difference method) and FVM(finite volume method) are used for analyzing the fluid flow numerically. However it is difficult to apply them to problems involving complex geometries, multi-connected domains, and complex boundary conditions. On the contrary, FEM(finite element method) with coordinates transformation for the unstructured grid is effective for the complex geometries. Most of previous studies have used commercial codes such as KIVA or STAR-CD for the flow analyses in the engine cylinder, and these codes are mostly based on the FVM. In the present study, using the FEM for three-dimensional, unsteady, and incompressible Navier-Stokes equation, the velocity and pressure fields in the engine cylinder have been numerically analyzed. As a numerical algorithm, 4-step time-splitting method is used and ALE(arbitrary Lagrangian Eulerian) method is adopted for moving grids. In the Piston-Cylinder, the calculated results show good agreement in comparison with those by the FVM and the experimental results by the LDA.

• Journal of computational fluids engineering
• /
• v.20 no.4
• /
• pp.28-35
• /
• 2015

BARAM system that means 'wind' in Korean has been established as a virtual wind tunnel system for aircraft design. Its aim is to provide researchers with easy-to-use, production-level environment for all stages of CFD simulation. To cope with this goal an integrated environment with a set of CFD solvers is developed and coupled with an highly-efficient visualization software. BARAM has three improvements comparing with previous CFD simulation environments. First, it provides a new automatic mesh generation method for structured and unstructured grid. Second, it also provides real-time visualization for massive CFD data set. Third, it includes more high-fidelity CFD solvers than commercial solvers.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.1
• /
• pp.68-75
• /
• 2005

By utilizing a semi-empirical soot model, the applicability of the laminar flamelet concept fur simulating the formation and oxidation of soot in the laminar diffusion flame has been studied. The source terms for two transport equations of the soot formation and oxidation are calculated in the mixture fraction/scalar dissipation rate space for laminar flamelets and stored in a library. In this study, emphasis is given to the interaction associated with radiation and soot formation. The radiative heat loss is obtained by solving the radiative transfer equation using the unstructured grid finite volume method with the WSGGM. The calculated temperatures and soot volume fractions agree relatively well with the experimental data and the previous numerical results of Kaplan et al. using the detailed chemistry.