• 한국콘텐츠학회논문지
• /
• 제12권1호
• /
• pp.400-408
• /
• 2012

일부지역 치과위생사를 대상으로 일반적 특성 및 근무특성, 직무스트레스, 사회심리 스트레스와의 관련성을 파악하기 위해 치과위생사 219명을 대상으로 최종분석결과 치과위생사의 직무스트레스 총점은 $47.41{\pm}7.46$이었고, 사회심리적 스트레스의 총점은 $23.05{\pm}7.49$이었다. 연령이 낮을수록 직위가 낮을수록 미혼일수록 물리환경, 직무자율성, 부상부적절에 대한 직무스트레스가 높았고, 수입, 학력이 낮을수록 직무경력기간이 짧을수록 직무자율에 대한 스트레스가 높게 나타났다. 일평균근무시간이 길수록 물리환경, 직무요구에 대한 스트레스가 높았다. 물리환경, 직무요구, 직무자율성, 직무불안정, 보상부적절, 직장문화에 대한 직무스트레스가 높을수록 사회심리 스트레스가 높아지는 양의 상관관계를 가졌다. 직무불안정, 조직체계, 보상부적절, 직급이 높을수록 물리환경 스트레스가 많을수록 사회심리 스트레스에 영향을 미치는 것으로 나타났다.

• 한국병원경영학회지
• /
• 제24권2호
• /
• pp.1-11
• /
• 2019

Purpose: The purpose of this study is to identify relationship between work unstability and personal medical expenditure ratio focusing on wage workers' contract period. Method: This study analyzed 2015 yearly data beta version of Korea Health Panel, co-managed by Korea Institute for Health and Social Affairs and National Insurance Corporation for data analysis. When executing linear regression, Household income was applied with equivalized income, and the proportion of personal medical expenditure was naturally logged to perform linear regression and the demographic and socioeconomic factors were taken into account. The demographic and socio-economic factors were also considered. Findings: As a result of reviewing the used factors, it was found that the more unstable work status, the higher personal medical expenditure ratio. This result corresponds to 'The Theory of Fundamental Causes' by Link & Phelan. Conclusion : It indicates that policy efforts should be made to improve the working environment and health level of socially unstable workers.

• 지질공학
• /
• 제29권3호
• /
• pp.251-264
• /
• 2019

본 연구에서는 설악산국립공원 천불동 계곡에 위치한 암반사면의 낙석 위험블록을 대상으로 지상 LiDAR를 이용하여 변위 모니터링을 수행하였다. 모니터링 지점은 기존에 낙석이 발생되었거나 낙석발생이 예상되는 귀면암 인근 및 오련폭포 인근 암반사면을 선정하였다. 대상 지점의 암반사면 위험블록에 대한 모니터링은 지상 LiDAR를 이용하여 약 7개월 동안 5차례 촬영을 진행하였다. 지상 LiDAR 촬영 결과 토대로 변위량을 분석한 결과 폐색영역의 보간을 통해 발생한 오차와 식생 활력도의 차이에 의한 오차가 분석결과에 크게 영향을 미치는 것으로 확인되었다. 이와 같은 외부영향을 최소화하기 위해서는 실제 촬영지점을 대상으로 변위량을 탐지하여야 한다. 대상구간 암반사면 위험블록에서 지상 LiDAR 촬영 및 변위량을 분석한 결과 변위량이 매우 작게 발생하였으며, 대부분 오차범위 아래의 변위량을 보이므로 실제 변위가 발생하였다고 판단하기 어렵다. 한편, 지상 LiDAR를 이용하여 암반사면 위험블록 모니터링을 수행하기 위해서는 식생이 없는 구간을 선정하는 것이 중요하며, 식생이 존재하는 구간의 PountCloud 제거 및 Mesh Model 분석은 데이터 신뢰성 확보에 가장 중요한 항목임을 알 수 있다.

• Nuclear Engineering and Technology
• /
• 제52권8호
• /
• pp.1669-1676
• /
• 2020

The IAEA held the IAEA Robotics Challenge 2017 (IRC2017) to protect workers during inspections of spent nuclear fuel and to improve work efficiency and accuracy rates. To this end, we developed an unmanned surface vehicle (USV) system called the spent fuel check vehicle (SCV). The SCV extracts and tracks the target through image processing, and it is necessary to find suitable parameters for the SNF storage environment in advance. This preliminary work takes time. It is also difficult to prepare the environment in which the work will proceed. In addition, if the preliminary work does not proceed as planned, the system will not move at the proper speed and will become unstable, with yawing and overshoot. To solve this problem, we developed a controller with a camera that can extract the depth at which the target is stored and allow distance-adaptive control. This controller is able to attenuate system instability factors such as yawing and overshoot better than existing controllers by continuously changing system operation parameters according to the depth. In addition, the time required for preliminary work during inspections can be shortened.

• Asian Journal of Atmospheric Environment
• /
• 제12권1호
• /
• pp.47-58
• /
• 2018

The aim of this work is to investigate the effect of atmospheric stability on near-field pollutant dispersion from rooftop emissions of a single cubic building using computational fluid dynamics (CFD). This paper used the shear stress transport (here after SST) k-${\omega}$ model for predicting the flow and pollutant dispersion around an isolated cubic building. CFD simulations were performed with two emission rates and six atmospheric stability conditions. The results of the simulations were compared with the data from wind tunnel experiments and the result of simulations obtained by previous studies in neutral atmospheric condition. The results indicate that the reattachment length on the roof ($X_R$) obtained by computations show good agreement with the experimental results. However, the reattachment length of the rooftop of the building ($X_F$) is greatly overestimated compared to the findings of wind tunnel test. The result also shows that the general distribution of dimensionless concentration given by SST k-${\omega}$ at the side and leeward wall surfaces is similar to that of the experiment. In unstable conditions, the length of the rooftop cavity was decreased. In stable conditions, the horizontal velocity in the lower part around the building was increased and the vertical velocity around the building was decreased. Stratification increased the horizontal cavity length and width near surface and unstable stratification decreased the horizontal cavity length and width near surface. Maintained stability increases the lateral spread of the plume on the leeward surface. The concentration levels close to the ground's surface under stable conditions were higher than under unstable and neutral conditions.

• 한국정보통신학회논문지
• /
• 제18권11호
• /
• pp.2771-2778
• /
• 2014

본 논문은 Delay Tolerant Network(DTN)에서 예측기반 라우팅을 사용할 때 효율적인 중계 노드를 선택할 수 있도록 노드 속성을 분석하는 알고리즘을 제안한다. 기존 예측기반 DTN 라우팅 알고리즘은 노드의 정보를 분석하여 목적 노드로 접근하는 노드를 예측하여 중계 노드로 선택하는데, DTN의 특성상 전체적인 네트워크의 상황을 파악하기 힘들어 불규칙하게 변화하는 네트워크에서는 지연시간이 증가하고 전송률이 감소하는 단점이 있었다. 이를 해결하기 위해 제안하는 알고리즘은 노드의 속도, 방향, 위치 등의 속성 정보와 네트워크의 환경에 적응적으로 변화하는 가중치를 사용해 불분명한 네트워크 환경에서 더 효율적인 노드를 선택할 수 있도록 한다. 본 논문은 모의실험을 통해 제안하는 알고리즘을 사용한 라우팅 프로토콜이 기존 라우팅 프로토콜에 비해 전송률, 지연시간, 오버헤드 측면에서 향상됨을 검증한다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.186-188
• /
• 2003

Rail Route Alignment in hilly terrain is a difficult task to implement as several natural constraints poses threat to the safety and stability of the alignment. The conventional methods followed to find out the final location survey or the feasibility analysis for alignment is time taking consuming. Some times, due to inaccessibility of the terrain it becomes impossible to carry out such works. The construction works in hilly terrain, which are associated with the proposed alignment, are not same as carried out in plane areas due to a vast contrast between the two areas. Different geological structures such as faults, thrusts, synclines and anticlines are a big problem to carry out normal construction practices. Thus for a safe and stable railway route in the unstable hilly areas, it is required to carry out the feasibility analysis of the proposed alignment to assist the policy makers for a successful implementation of the alignment. In the present work Remote Sensing and GIS has been successfully used to carry out geological feasibility and slope stability analysis for rail route alignment work.

• 드라이브 ㆍ 컨트롤
• /
• 제19권1호
• /
• pp.1-7
• /
• 2022

Recently, a re-painting robot was developed to semi-automatically conduct blasting work in bridge spaces to improve work productivity and worker safety. In this study, a vision sensor-based monitoring module was developed to automatically move the re-painting robot along the path. The monitoring module provides direction information to the robot by analyzing the boundary between the painting surface and the metal surface. To stably measure images in unstable environments, various techniques for improving image visibility were applied in this study. Then, the driving performance was verified in a similar environment.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.308-311
• /
• 2005

[ $^{222}Rn\;and\;^{226}Ra$ ] in groundwater were determined simultaneously using a gamma-spectroscopy. A nitrogen flushing equipment has been used for elimination and stabilization of high and unstable background activity due to the radon and its progenies in counting shield and room. The aim of present work was to control the background activity for simultaneous measurement of radium$(^{226}Ra)$ and radon$(^{222}Rn)$ in groundwater using a gamma-spectrometry. Background activity was about 1.0dps and the standard deviation was about 50%, The background activity could be minimized using nitrogen flushing equipment in the range of 0.1 to 0.5 and the RSD was about 5% at the experimental condition. The detection limit of $^{222}Rn\;and\;^{226}Ra$ in groundwater was 0.5dps/L in the background control method. In most groundwater used in the work, radon activity was more than the detection limit. However, radium activity in some groundwater was less than the detection limit. If the low level radium in groundwater must be measured, preconcentration process such as concentration should be performed before measuring the groundwater.

• 유통과학연구
• /
• 제14권3호
• /
• pp.55-62
• /
• 2016

Purpose - Average using time of smart-phone for Korean people is 3 hours 39 minutes and most people who are using a computer at home and their workplace can be affected over force to neck and shoulder due to unstable body posture. musculoskeletal disorders which caused by unstable body posture can affect strongly to decrease work efficiency. So this research is designed to measure the effect of using computer & smart-phone on decreased work efficiency due to musculoskeletal disorders and mediating effect between decreased work efficiency and musculoskeletal disorders. Research Design, Data, and Methodology - The author has developed a questionnaire with 6 hypothesis on the basis of previous research result with 5 constructs. The questionnaires were also made by interview and E-mail. 300 copies of questionnaires were distributed and 282 questionnaire were used for the analysis as valid data responses. SPSS ver.21.0 were used and made Cronbach's α and reliability test, correlation, Baron & Kenny 3 step mediated regression analysis. Result - Cronbach's α shows 0.770~0.954 and C.R. is 0.963~0.997 which is higher than 0.7. and AVE was 0.867~0.933. So the data are all acceptable condition. Using for a long time of a computer & smart-phone has a positive effect on musculoskeletal disorders. This means, it can cause musculoskeletal disorders if people use a computer & smart-phone for a long time due to unstable body posture. And musculoskeletal disorders can effect strongly decrease work efficiency. This study also found out that a long time of using computer can cause musculoskeletal disorders rather than using smart-phone a long time. To check mediate effect of musculoskeletal disorders between using a computer & smart-phone and Decreased Work Efficiency, author used 3-step mediated regression analysis of Baron & Kenny (1986). Using a computer for a long time mediate partially and using a smart-phone for a long time mediate completely. This means that using a smart-phone a long time is not the actual reason to decrease work efficiency. But using level of smart-phone is increasing rapidly day by day. So we need to make additional research about this matter seriously. Conclusion - Nowadays, people can not live on without a computer & smart-phone even a moment. But, using a computer for a long time will affect to cause musculoskeletal disorders and it will effect strongly to decrease work efficiency. Before, we thought over that musculoskeletal disorders were diseases of elder people. But, we found out from this study that musculoskeletal disorders can be happen to any people, even children, or workers in heavy industry or engaged in brain work. So we need to be careful when we use a computer for a long time. People also need to be careful to keep correct body posture when using both a computer and smart-phone since a smart-phone became more popular and using time level became longer. Due to increased income and living standard of people, physical growth of young people is so rapid. But the physical environment of society is not suitable for them since it can not follow up the speed of growth. Suitable work table is very important to prevent musculoskeletal disorder which can affect decrease work efficiency. For a person, a society or country, increased productivity is very important since it can directly connected to the job satisfaction. Education and reeducation for the people is also important, but to teach them how to keep good condition of health will be more important since it can increase the quality of work efficiency and quality of life. Computer and Smart-phone is one the best invention of modern society, but it can cause mental and physical disease which can affect decrease work efficiency and productivity. So it is necessary to observe attentively for the situation continually.