• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.459-465
• /
• 1996

This paper is about unstable behavior in concrete during the localized deformation and the crack growths in concrete. By modeling the strain localization phenomenon of concrete, the stability condition of the localization is obtained and analyzed. And the stability and bifurcation condition of crack growths in two parallel cracks under different loading conditions are derived and discussed.

• 대한토목학회논문집
• /
• 제7권1호
• /
• pp.75-82
• /
• 1987

본(本) 연구(硏究)는 소규모강복범위(小規模降伏範圍)를 벗어나는 대규모강복조건하(大規模降伏條件下)에서 구조안정성(構造安定性)에 관(關)한 중요(重要)한 문제(問題)인 불안정연성파괴(不安定延性破壞)를 평가(評價)할 수 있는 파괴역학인자(破壞力學因子)로서의 J 적분(積分)을 수치해(數値解)로서 구하는데 그 목적(目的)을 두었다. 이를 위해 균열재(龜裂材)의 균열선단요소(龜裂先端要素)로 8절점등방특이요소(節點等方特異要素)를 사용(使用)하고, 균열발생(發生)은 파괴인성(破壞靭性) $J_{IC}$를 초과할 때 일어나도록 하였으며, 그리고 균열성장(成長)의 취급(取級)은 균열개구각(龜裂開口角)을 이용(利用)했다. 본(本) 연구(硏究)에 의해 해석(解析)된 J 적분치(積分値)를 사용(使用)하여 균열재의 균열발생 과 안정성장(安定成長), 불안정(不安定) 발생점(發生點)을 찾은 결과(結果) 다른 연구결과(硏究結果)와 잘 일치(一致)하고 있어 탄소성(彈塑性)을 고려(考慮)한 J 적분치(積分値)가 균열의 안정성장(安定成長) 및 불안정연성파괴(不安定延性破壞) 문제(問題)를 다루는 파괴역학인자(破壞力學因子)로서 직접(直接) 이용(利用)될 수 있음을 보였다.

• Computers and Concrete
• /
• 제18권3호
• /
• pp.337-354
• /
• 2016

To study the influence on fracture properties of reinforced concrete wedge splitting test specimens by the addition of reinforcement, and the restriction of steel bars on crack propagation, 7 groups reinforced concrete specimens of different reinforcement position and 1 group plain concrete specimens with the same size factors were designed and constructed for the tests. Based on the double-K fracture criterion and tests, fracture toughness calculation model which was suitable for reinforced concrete wedge splitting tensile specimens has been obtained. The results show that: the value of initial craking load Pini and unstable fracture load Pun decreases gradually with the distance of reinforcement away from specimens's top. Compared with plain concrete specimens, addition of steel bar can reduce the value of initial fracture toughness KIini, but significantly increase the value of the critical effective crack length ac and unstable fracture toughness KIun. For tensional concrete member, the effect of anti-cracking by reinforcement was mainly acted after cracking, the best function of preventing fracture initiation was when the steel bar was placed in the middle of the crack, and when the reinforcement was across the crack and located away from crack tip, it plays the best role in inhibiting the extension of crack.

• 대한토목학회논문집
• /
• 제11권3호
• /
• pp.29-36
• /
• 1991

본 연구에서는 ASTM E561-80에서 제안한 방법과는 달리, 반복하중시 측정된 각각의 compliance를 상호비교인자로 활용하여 증가 균열길이를 간접적으로 구하고, 이 값들을 균혈성장 동안에 흡수된 비탄성 에너지를 고려한 변형에너지 해방율개념에 적용하여 구한 저항곡선의 해석으로부터 콘크리트의 불안정 균열성장 개시점을 구하였으며, 또한 굵은골재 최대수치와 시편의 두께변화가 임계파괴인성치에 미치는 영향 등을 고찰하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.61-61
• /
• 2010

The purpose of this study is to prevent the unstable fracture at the FCA butt weldment of hatch coaming deck in the ultra large containership during service life. In order to do it, the behavior of the embedded crack at the weldment under design loading conditions was evaluated in accordance with BS7910. Here, the level of primary stress induced by ship motion was evaluated by the design code of classification society and FEA. The level of residual stress as secondary stress was calculated in consideration of the restraint degree of weldment and welding heat input by using the predictive equation proposed by authors in the previous study. The fatigue crack growth rate at the weldment was evaluated using CT specimen in accordance with ASTM E647. According to the results, although the allowable defect for embedded crack specified in the classification society exists at the weldment, the occurrence possibility of unstable fracture at the weldment could not be negligible, regardless of CTOD value given in this study. So, in this study, the effect of initial defect size, welding heat input, restraint degree and CTOD on the fracture mechanical characteristics of embedded crack at the weldment was evaluated by the comprehensive fracture assessment. Based on the results, the design criteria including allowable defect, residual stress level and CTOD value was established to prevent the unstable fracture at the FCA butt weldment of hatch coaming deck in an ultra large containership during service life of 20years.

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2005년도 춘계학술발표회 및 정기총회 2권1호(통권2호)
• /
• pp.89-98
• /
• 2005

Membrane structures, a kind of lightweight soft structural system, are used for spatial structures. The material property of the membrane has strong axial stiffness, but little bending stiffness. Therefore membrane structures arc unstable structures initially. These soft structures need to be introduced initial stresses first because of its initial unstable state, and it happens large deformation phenomenon. To find the structural shape after large deformation caused by initial stiffness introduced, we need the shape analysis considering geometric nonlinearity in structural design procedure. In this study, we investigate into the stress concentration at crack of membrane structures. Therefore, using the nonlinear analysis program that NASS (Nonlinear Analysis for Spatial Structures) perform nonlinear analysis, and stress distribution for creak length investigate for using linear elastic fracture mechanics.

• 한국기계가공학회지
• /
• 제4권2호
• /
• pp.43-49
• /
• 2005

The purpose of a fatigue crack arrest design is to prevent a fatigue fracture of machine and structure resulted from unstable crack growth. In all cases of load transfer to second elements such as stringers, doublers or flanges, crack arrest is possible; arrest occurring when the fatigue crack reaches the second element. In the present work, a numerical analysis was carried out to estimate the effect of shape parameters on fatigue crack growth and arrest behavior of integrally stiffened panels. Based on these results, a set of fatigue crack arrest design chart is presented as "non-dimensional arrest load - thickness ratio" relationship.

• 비파괴검사학회지
• /
• 제18권4호
• /
• pp.278-291
• /
• 1998

연속섬유강화 복합재료의 경우 보강섬유의 파괴, 모재의 파괴, 섬유와 모재의 분리, 층간파괴 등의 복합적인 파괴현상이 동반되고 특히 균열성장과 균열성장 정지가 균열가교 현상 때문에 반복되므로 안정성장과 불안정성장이 불규칙하게 반복된다. 따라서 주균열 성장의 개시점과 불안정 파괴점에서의 파괴인성치를 정확하게 결정한다는 것은 매우 어려운 것이다. 본 연구에서는 CFRP에 대하여 파괴인성 실험과 병행하여 실시간으로 결함을 검출하는 새로운 방법인 AE분석법 및 비디오 마이크로 스코프를 이용하여 파괴과정을 기록하여 검토, 분석함으로서 손상의 정도와 파괴기구를 규명하였을 뿐만 아니라 주균열 성장의 개시점, 균열가교 역할을 하는 섬유다발의 파단점, 균열의 불안정 파괴 개시점을 찾아 이를 기초로 균열진전 저항곡선에 의한 파괴인성치를 평가하여 신뢰성 있는 파괴인성 측정법을 제시하였다.

• 한국정밀공학회지
• /
• 제6권3호
• /
• pp.78-89
• /
• 1989

Applicability of tearing modulus based on J-integral proposed by Paris et al is investigated using compact tension specimens of strutural alloy steel (SCM4). Both general fracture test and instability fracture test are performed. The applied tearing modulus, ( $T_{j}$)app estimated from the real load vs. crack growth curve measured from experiments are compared with that estimated from the limit load vs. crack growth curve. The results are : (1) the $T_{j}$parameter could be applied to predict crack growth instability : (2) The use of ( $T_{j}$)app estimated from the load vs. crack growth curve, proposed in this study could be well predicted crack growth instability instead of that estimated form the limit load vs. crack growth curve.e.

• Corrosion Science and Technology
• /
• 제3권1호
• /
• pp.14-19
• /
• 2004

Crack growth rate and threshold stress intensity factor for stress corrosion cracking(SCC), $K_{ISCC}$ were measured for type 403 stainless steel in 3,5% NaCl solution at room temperature and SCC was monitored by electrochemical noise technique during $K_{ISCC}$ testing. In rising load test, pits were formed at the tip of pre-crack for the pre-cracked compact tension specimen unlike in smooth round specimen in which only unstable pits were observed and hence immune to SCC. Micro-cracks were found to initiate from the pits in the former specimen, and initiation of micro-crack as well as macro-crack was detected by electrochemical noise technique in rising load $K_{ISCC}$ tests. Crack growth rate increased with increasing either displacement rate or stress intensity factor at crack initiation and was higher in rising load $K_{ISCC}$ test compared to constant load $K_{ISCC}$ test at given stress intensities.