• The Journal of Engineering Geology
• /
• v.26 no.3
• /
• pp.413-422
• /
• 2016

With the rapidly increasing population density and development of infrastructure, the loss of life and property damage caused by landslides has increased gradually in urban area. Especially, Because Busan has high percentage of mountainous terrain among the metropolitan in Korea, it is unavoidable to develop mountainous region excessively. The objective of this evaluation is to study on landslide hazard possibility for Mt. Hwangryeong in Busan Metropolitan City using the infinite slope model considering the groundwater level. All data related to creating the thematic maps was carried out using ArcGIS 10.0. The results show that FS (Factor of Safety) for landslide is inversely proportional to groundwater level change as expected. Most area indicates stable state in dry condition, and unstable area increase due to high pore water pressure when the groundwater level rise. However, several places in high lineament density area where landslide has been previously occurred, are more stable than other places according to the analysis. This inconsistency between real situation and analysis results indicates that additional analytical method would be necessary to solve the problem. Therefore, we suggest that development of new infiltration theory for unsaturated zone would be helpful to evaluate groundwater level distribution as time goes by.

• Korean Journal of Human Ecology
• /
• v.18 no.4
• /
• pp.841-855
• /
• 2009

The main objective of this study is to examine the situations of group-homes for the elderly and clarify the problems of them. This study investigates the present conditions of welfare facilities and supply conditions. 4 group-homes were surveyed in Jeonju and Kwangju cities. Data was collected through various ways including the survey conducted by facility operators, the measurement of living space, and photo-takings. The major results of this study are as follows: 1) With the introduction of nursing care insurance in 2008, the increase of the demand and supply to group-home will be expected, due to less cost for recuperation. The care of elderly in homelike atmosphere is effective to the elderly suffering from dementia. Therefore, it is proper that the supply of group-homes for dementia will be needed. 2) Group-homes for the elderly are being supplied under the standards of welfare facilities in the present. Separate supply standards, however, are needed because they are not suitable for small scale group-homes. 3) To supply Group-homes for the elderly on a one-unit basis would cause various problems such as economical unreality, personnel distribution and so on. It is necessary to supply more than two units for more efficient management. 4) The management of group-homes for the elderly is financially unstable because the operating funds heavily depend on the users or people who are connected with the facilities through private networks. Therefore, additional support is needed to settle the financial problem. It would be helpful to build the public networking that provides information about the group-home for the elderly for the public. 5) In case of the increase in the supply of the group-home in a residential area, it could be helpful to promote the group-home to the public. 6) The operators state that the main problems of group homes for the elderly lie in financial difficulties and the shortage of professionals and volunteers. The financial, personnel, and material support for personnel and the supervision of management are required for the transparency and effectiveness of the facility management. In addition, the closer network and cooperation system with the community is required. 7) The present living environments for group-homes for the elderly leave much room for improvement, considering the physical condition of the elderly. The more careful selections in the color, shape, material, and equipment of the facilities should be made for the convenience of the elderly users.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.4
• /
• pp.287-298
• /
• 2000

The charge of distance and the change of tack between paired boats were measured by ship's distance measuring system fixed MCS in the main boat and MS in the following boat. The operating depth of the anchovy boat seine was recorded and analysed by self memory temperature/depth sensor in order to compare the relationship between the distance between towing boats and geometry of the anchovy boat seine net. The results are as follow, (1) When distance between paired boat was 5m, the fishing net was spreaded down deeply and unstably in accordance with bag net and flapper may be help to pass out anchovy school. (2) When distance between paired boat was 100m, vertical opening of the net was gradually increased with higher slope of towing depth in the square, bosom and flapper. Therefore, fishing efficiency could be decreased by preventing the entering of anchovy due to unstable shape of the bag net. (3) When distance between paired boat was 200m, the geometry of the anchovy seine was stable condition with the end of bag net was up while flapper was down and it may cause bad effect in fishing efficiency. (4) When distance between paired boat was 300m, the shape from wing net to bag net was gradually slow down and stable enough as well as good shape in bag net and flapper. (5) The ship's distance measuring system could be used for measurement and accurate control of distance between paired boat in accordance of anchovy recordings by fish finder in order to get higher fishing efficiency in anchory boat seine operation.

• Fire Science and Engineering
• /
• v.30 no.3
• /
• pp.138-147
• /
• 2016

As services for citizens' security and protection offered at the national and social levels become more widely recognized across society, the more frequent use of ambulances by patients with both minor and major injuries is being observed. However, the number of safety accidents during transport by ambulances, which are responsible for the prompt transport of patients, has been rising in tandem with the increase in their use. This is due not only to their inconspicuousness both on the road and in other environments where these vehicles are exposed, but also to the high chance of secondary accidents, putting the lives of both patients and emergency responders at risk. It is important to study and develop designs that guarantee protection against safety accidents, noting that ambulances are completely exposed and unprotected on the road on cloudy days and at night-time. In addition, by identifying colors and design motives that enhance the conspicuity of ambulances from a distance and increase their security, emergency responders and patients can be safely protected, the identity of the ambulances can be reinforced and modernized, and the sense oppression which can be visually imposed on patients in a psychologically unstable condition can be eased. Against this backdrop, this study presents the process involved in deriving the exteriors of ambulances in Korea, including their colors and patterns, by examining the established global best practices and identifying the need for more studies into colors, even unconventional ones, that improve their safety.

• Korean Journal of Microbiology
• /
• v.40 no.4
• /
• pp.320-327
• /
• 2004

Three hundreds thirty two bacterial colonies which were able to degrade crude oil were isolated from soil sam­ples that were contaminated with oil in Daejeon area. Among them, one bacterial strain was selected for this study based on its higher oil degrading ability, and this selected bacterial strain was identified as Acinetobactor sp. B2 through physiological-biochemical tests and analysis of its 16S rRNA sequence. Acinetobactor sp. B2 was able to utilize various carbohydrates but did not utilize trehalose and mannitol as a sole carbon source. Acinetobactor sp. B2 showed a weak resistance to antibiotics such as kanamycin, streptomycin, tetracycline and spectinomycin, but showed a high resistance up to mg/ml unit to heavy metals such as Ba, Li, Mn, AI, Cr and Pb. The optimal growth temperature of Acinetobactor sp. B2 was $30^{\circ}C.$ The lipase produced by Acinetobactor sp. B2 was purified by ammonium sulfate precipitation, DEAE-Toyopearl 650M ion exchange chromatography and Sephadex gel filtration chromatography. Its molecular mass was about 60 kDa and condition for the optimal activity was observed at $40^{\circ}C$ and pH 10, respectively. The activation energy of lipase for the hydrolysis of p­nitrophenyl palmitate was 2.7 kcal/mol in the temperature range of 4 to $37^{\circ}C,$ and the enzyme was unstable at the temperature higher than $60^{\circ}C.$ The Michaelis constant $(K_m)\;and\;V_{max}$ for p-nitrophenyl palmitate were 21.8 uM and $270.3\;{\mu}M\;min^{-1}mg^{-1},$ respectively. This enzyme was strongly inhibited by 10 mM $Cd^{2+},\;Co^{2+},\;Fe^{2+},\;Hg^{2+},$ EDTA and 2-Mercaptoethalol.

• Journal of Conservation Science
• /
• v.26 no.2
• /
• pp.149-156
• /
• 2010

One of resins, V-Flon is useful as a coating material because YK-D80, which is a solvent for V-Flon, is not highly volatile. However, it can not completely harden and can flow out when metal artifacts are joined and restored in the process of the treatment. Therefore, after the impregnation process in order to accelerate the hardening speed of a coating material, usually a dry oven was adopted. This study focused on finding the problems on the dry oven which is employed to increase the speed and investigating the most effective solvent and its composition by checking any change occurred depending on the concentration of solvents. Six different types of solvents were selected and samples were prepared in a manner that they were impregnated with solvents in three concentrations respectively (10%, 20%, 30%). To determine the condition of the samples, the stability evaluation was performed by measuring the change of color and the gloss, the thickness of coated layers, the corrosion after coating, the water resistance by contact angles. Through the comparative experiments between the natural drying and the artificial drying using a dry oven, it was found that when the dry oven is used, some problems are identified on the point of forming a uniform and stable layer because of the unstable data collected from the forced artificial dry. The experiments performed using 3 different concentration rates (10%, 20%, 30%) presented that in the case of 10% V-Flon in Xylene (using as a solvent), its layer was thin as well as it showed the high water-barrier property, which allows it to form the stably coated layer with the lower gloss and color change.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2391-2400
• /
• 2015

Weather proof steels are used for steel bridges due to its high corrosion resistance under atmospheric conditions. However, instead of forming stabilized rust layers, general rust occurs on weather proof steels under high humidity condition close to seawater or shady places. In Japan, therefore, they perform rust stabilization treatment instead of unpainted treatment due to severe atmospheric conditions. However, most of domestic weather proof steels were constructed unpainted in the form of closed box-girder, which makes the periodical repetition of dry and wet hard to occur. For the steel bridges constructed on the Han river, the evaporation of water, dew condensation due to temperature change, and stagnant water due to rain affect harmfully on the formation of passive film on weather proof steels. Thus, in this research, in order to analyze corrosion properties inside the closed box-girder for the unpainted weather proof steel bridge in the waterworks safety zone, multiple ways of analysis such as observation with eyes, cellophane-tape test, steel thickness measurement, surface corrosion potential measurement, electron microscope analysis, and X-ray diffraction analysis of the rust were performed. As a result, unstable rust layer was observed inside the closed box-girder, and severe corrosion was observed on the top and bottom of the flanges due to the effects of stagnant water caused by rain, dew condensation, and de-icing materials.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.588-596
• /
• 1996

The optimum conditions of the 1st and 2nd distillation had been investigated to obtaine a high quality monomeric MDI and fire reactive polymeric MDI by purification of crude MDI. Effect of additives on the monomeric MDI's color change, dimerization and the reactivity of polymeric MDI with standard polyol system has been tested. When the monomeric MDI yield is approximately 32%, 4,4'-MDI content is above 98% in the monomeric MDI at the 1st distillation. When the separation ratio of initial portion and residue percentage, reflux ratio are set at respectively, approximately 20wt%, 9wt%, above 2 in order to minimize the content of 2,4'-MDI in monomeric MDI, the freezing point of final distilled monomeric MDI is above $38.4^{\circ}C$. Since the monomeric MDI is inherently unstable in the room condition, monomeric MDI easily changes it's color and conducts self-polymerization reaction. To increase the stability of monomeric MDI, the composition of antioxidant, which is composed of phenolic 1st antioxidant, phosphorus 2nd antioxidant, UV absorbent and Hindered amine light stabilizer are used, and benzoyl chloride as antipolymerization agent test are that APHA color is less than 20, dimer content is remained less than 0.36wt% after 45 days storage of monomeric MDI.

• KSBB Journal
• /
• v.20 no.5 s.94
• /
• pp.359-362
• /
• 2005

Bacillus licheniformis was an useful material for improvement of fecal microflora. The stability of Bacillus licheniformis in low pH (pH 2, 3, 4, 6, 7), artificial bile acid, high concentration of salt (0, 5, 10, 20, $30\%$), and ethanol (0, 4, 8, 16, $32\%$) was investigated in this study. The viability of Bacillus licheniformis was stable for pH 3, 4, 6, 7 Final viability of Bacillus licheniformis was confirmed below $25\%$, in the bile acid. In high concentration of salt, Bacillus licheniformis showed optimal viability in $10\%$ of salt. The viability of Bacillus licheniformis was over $95\%$ in condition of ethanol concentration $4\%,\;8\%,16\%,\;32\%$ contrast with uncontained ethanol at $37^{\circ}C$ for 4h. It was verified that Bacillus licheniformis was stable for pH 4, 6, 7, high concentration of salt and ethanol but was unstable in pH 2 and bile acid.

• Journal of Korea Game Society
• /
• v.8 no.1
• /
• pp.15-27
• /
• 2008

Games can be divided into different genres such as action, adventure, role playing, simulation and etc based on the types of the play provided to a player. And each genre has various kinds of balancing system. Fighting games are classified as one of the action genres. They seem to have a simple structure but there is a variety of complex balancing factors. Because there are quite a number of the fighting games that were developed in a relatively short period, it is possible to identify diverse balancing systems in the fighting games from unstable ones in the early stage to the recent ones in a stable condition. The balancing system allows players to use all the contents offered in the game by eliminating the imbalance created among the various components. It helps players maintain their interest during the procedure. Furthermore, it gives the justification, increases the efficiency of controlling, and develops the empathy in the process. Therefore, the balancing system plays a crucial role in the games when it comes to getting an evaluation and building popularity, which can determine its lifespan. In this study, we researched on the possibilities of expanding an application to the other genres by understanding the established balancing model developed from the case study of the fighting games.