• 지구물리와물리탐사
• /
• 제21권3호
• /
• pp.150-161
• /
• 2018

최근의 정보통신기술 발전에 기반한 무인 항공 전자탐사는 효율적인 광역 탐사가 가능하다는 장점으로 인해 다양한 활용이 시도되고 있다. 이 연구에서는 무인 항공 전자탐사의 실제 적용을 위한 이론 연구의 일환으로 한국지질자원연구원에서 개발된 무인 비행선 전자탐사 시스템에 대한 고찰을 수행하였다. 이 시스템은 기존의 항공 전자탐사 시스템들과는 다른 송수신루프의 배치로 인해 측정되는 자기장을 해석하기 위한 새로운 기술이 필요하다. 따라서, 임의의 모양을 갖는 송신원에 의한 전자기장 반응을 계산할 수 있는 방법을 제안하였으며 원형루프에 의한 이론해와의 비교 검증을 통해 그 타당성을 확인하였다. 또한, 3차원적으로 분포한 지하의 전도성 이상체에 의한 자기장 반응을 모사하기 위하여 변유한요소법 기반의 3차원 주파수영역 전자탐사 모델링 알고리듬과 결합하였다. 개발된 알고리듬을 바탕으로 지하 이상체에 의한 자기장 반응분석을 수행한 결과, 기존 항공 전자탐사 시스템들과 마찬가지로 탐사고도가 높아지거나 이상체의 심도가 깊어짐에 따라 이상체에 의한 반응이 줄어듦을 알 수 있었고 이상체의 전기비저항이 증가함에 따라서도 반응이 작아지는 것을 확인하였다. 그러나, 이상체의 심도 및 전기전도도와 사용 주파수에 따라 이상성분의 반응양상이 비선형적인 경향을 나타내는 구간이 존재하여, 자료해석 시 반응의 크기를 통한 단순 해석이 어려워지며 겉보기 비저항 계산 시에도 해의 비유일성을 야기시킬 수 있다는 것을 확인하였다. 따라서 실제로 시스템을 활용하여 탐사를 수행할 시, 탐사목적 및 현장 조건을 고려한 사전 모델링을 통해 적합한 주파수 대역 및 탐사고도를 설정하여 탐사를 수행하는 것이 선행되어야 한다.

• 한국항공운항학회지
• /
• 제30권1호
• /
• pp.38-43
• /
• 2022

As the use of unmanned aerial vehicles increases, in order to expand the operability of the unmanned aerial vehicle, it is essential to develop an unmanned aerial vehicle traffic management system, and to establish the system, it is necessary to analyze the integrated navigation performance of the unmanned aerial vehicle to be operated. Integrated navigation performance is affected by various factors such as the type of unmanned aerial vehicle, flight environment, and guidance law algorithm. In addition, since a large amount of flight data is required to obtain high-reliability analysis results, efficient and consistent flight scenarios are required. In this paper, a flight scenario that satisfies the requirements for integrated navigation performance analysis of rotary and fixed-wing unmanned aerial vehicles was designed and verified through flight experiments.

• 한국항공우주학회지
• /
• 제34권5호
• /
• pp.46-55
• /
• 2006

비행체의 궤적 최적화를 위해서는 비행체의 특성을 반영한 3차원 운동방정식이 유도되어야 하며, 비행선과 같이 공기보다 가벼운 비행체의 경우는 일반 고정익 항공기와는 다른 특성들을 반영하여야 한다. 본 연구에서는 중고도 무인비행선의 궤적 최적화를 위해 비행선의 운동방정식을 유도하고, 이를 이용한 최소시간 문제를 다루었다. 최적 궤적을 얻기 위하여 최적 궤적 문제를 제어입력 파라미터화를 이용한 비선형 프로그래밍 문제로 변환한 후 연속 2차 계획법을 이용하여 궤적을 산출하였으며, 이에 대한 수치결과를 나타내었다.

• 한국항공운항학회지
• /
• 제22권4호
• /
• pp.65-74
• /
• 2014

Unmanned aerial vehicles(UAVs) refer to the aircraft which carries no human pilot and is operated under remote control or in autonomous operational mode. As the UAVs can perform the dull, dangerous and difficult missions, various kinds of UAVs with different sizes and weights have been developed and operated for both civil and military application. As the avionics and communication technology related to the UAVs are matured, the demand for the UAVs is dramatically increased. Therefore, It is important to develope airworthiness process and regulations of the UAVs to minimize related risk to the man and environment. This paper describes related regulations and classification of the small UAVs for different international airworthiness authorities. The analysis of the CS-LURS verses Stanag 4702 and Stanag 4703 can provide guidelines for the generation of the airworthiness certification criteria for the small UAVs in civil sector. This paper conducted kinetic impact energy analysis of the loss of the small UAVs control scenarios and of the very small UAVs under 66 joules. Based on the analysis, the energy impact analysis can be considered before the design certification approval for the small UAVs.

• International Journal of Control, Automation, and Systems
• /
• 제4권6호
• /
• pp.782-787
• /
• 2006

The role of Unmanned Aircraft Vehicles(UAVs) has been increasing significantly in both military and civilian operations. Many complex systems, such as UAVs, are difficult to model accurately because they exhibit nonlinearity and show variations with time. Therefore, the control system must address the issues of uncertainty, nonlinearity, and complexity. Hence, identification of the mathematical model is an important process in controller design. In this paper, attitude dynamics identification of UAV is investigated. Using the flight data, nonlinear state space model for attitude dynamics of UAV is derived and verified. Real time simulation results show that the model dynamics match experimental data.

• International Journal of Advanced Culture Technology
• /
• 제8권1호
• /
• pp.173-181
• /
• 2020

This study examines whether unmanned aircraft systems (UAS) operated in the context of UAS traffic management (UTM) can be properly operated in its flight environment. In detail, this study examines the influencing navigation factors affecting UASs during flight and examines factors affecting the navigation of UASs under UTM. After deriving various factors affecting navigation, their importance are determined by applying the analytic hierarchy process technique, and the important influencing factors are examined. For low-altitude UAS navigation, errors are classified into navigation-system and flight-technical errors, and a hierarchy is constructed for their sub-factors affecting the influencers. Through this, influencing factors for precise navigation of low-altitude UAS are analyzed, and high importance items are identified.

• 항공우주시스템공학회지
• /
• 제4권4호
• /
• pp.18-27
• /
• 2010

Quadrotor is an aircraft which is possible in Vertical Take-off and Landing(VTOL). This aircraft can not only be created as an Unmanned Aerial Vehicle(UAV), but also can be easily used in various fields because of its simplicity of construction. This study is mainly conducted with two main purposes. The first goal is designing the quadrotor focusing on the lightweight and protecting the airframe. The second purpose is stabilizing the quadrotor's attitude by using the PID controller. MATLAB simulation is performed for obtaining PID gain based on equations of motion. We used the compensation filter technique for the calibration of sensor data. PID gain has been drawn out based on the MATLAB simulation. The efficiency of the attitude control is improved by calibration of sensor data.

• 한국항공운항학회지
• /
• 제30권3호
• /
• pp.109-116
• /
• 2022

A modular platform development technique was proposed to minimize development cost and development period by utilizing the already developed unmanned Aerial target AVT, which has been operated and verified for many years. New Mission Profile was designed and structural analysis was performed through finite element analysis (FEA) by analyzing mission requirements for visual short-range, non-visible mid-range, and long-range targets. The targets are used for guided missile anti-aircraft training. In addition, avionics systems including flight control computers for autonomous flights were developed to verify their conformance by performing launcher take-off tests with rapid acceleration changes and autonomous flight tests at a maximum speed of 300km per hour.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.85-86
• /
• 2022

Traditionally, the facility inspection was visually conducted by the managers, and consequently the result can be subjective because of different perspective and experience of them. To solve this problem, the studies on this topic has tried to integrate the UAS. However, it is still concerned to use in practice due to the lack of analysis of the performance factors affecting the UAS-based facility condition inspection. Hence, the purpose of this study is to identify the critical factors as well as their correlations by modeling causal loop diagram (CLD). A total of 20 variables were derived in four categorized groups, and the relationships were analyzed. Further study will develop a system dynamics (SD) model to simulate various scenarios based on stock-flow diagram through the defined relationships in this study.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.101-102
• /
• 2022

The current facility condition monitoring has disadvantages such as a slow inspection cycle, a risk of human casualties, and the need for a lot of time and money as the size of the structure is larger, because human access is required with limited use. Drones can reduce the risk of human casualties due to their good accessibility, and can compensate for the shortcomings of the current method by enabling monitoring on a wide scale. The goal of this study is to provide the current domestic monitoring process through benchmarking according to the recent research case of the US Department of Transportation (DOT) to suggest a process suitable for the domestic situation and the direction of future improvement measures.