• Journal of the Korean earth science society
• /
• v.39 no.1
• /
• pp.46-52
• /
• 2018

This paper is to study the development of three dimensional Digital Surface Model (DSM) using photogrammetry technique based on self-developed Drone (Unmanned Aerial Vehicle (UAV)). To develop DSM, we selected a study area in Jeju island and took 24 pictures from the drone. The three dimensional coordinates of the photos were made by Differential Global Positioning System (DGPS) surveying with 10 ground control points (GCP). From the calculated three dimensional coordinates, we produced orthographic image and DSM. The accuracy of DSM was calculated using three GCPs. The average accuracy of X and Y was from 8.8 to 14.7 cm, and the accuracy of Z was 0.8 to 12.4 cm. The accuracy was less than the reference accuracy of 1/1,000 digital map provided by National Geographic Information Institute (NGII). From the results, we found that the self-developed drone and the photogrammetry technique are a useful tool to make DSM and digital map of Jeju.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.3
• /
• pp.185-193
• /
• 2013

The plume infrared signature effects at various flight conditions of aircraft were investigated for the purpose of reducing infrared signature level. The nozzle of a virtual subsonic unmanned combat aerial vehicle was designed through a performance analysis. Nozzle and associated plume flowfields were first analyzed using a density-based CFD code and plume IR signature was then calculated on the basis of the narrow-band model. Finally, qualitative information for the plume infrared signature characteristics was obtained through the analysis of the IR signature effects at various flight conditions.

• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.473-483
• /
• 2015

This paper reports the single-input-single-output cascade control by using 1-axis attitude control test-bench for quad-rotor UAV. The test-bench was designed as a see-saw shape using 2 motors and propellers, and to enable changing the center of gravity with the center of gyration using ballast. The experiment was carried out by constructing a PID-PID controller having a cascade structure with the test-bench. The SIMC based PID gain tuning process, which makes PID gain tuning easy, was grafted to cascade control. To graft SIMC method, the system parameter estimation result was conducted with second order time delay model by using Matlab-Simulink. Gain tuning was conducted by simulating with estimated system parameter. In this paper, the conventional application of SIMC was conducted and improved application was proposed for improving stability at tuning process.

• Journal of Korea Multimedia Society
• /
• v.11 no.11
• /
• pp.1525-1535
• /
• 2008

High Altitude Platform (HAP) based networks deploy network infrastructures of Mobile Base Station (MBS) in a form of Unmanned Aerial Vehicle (UAV) at stratosphere in order to build network configuration. The ultimate goal of HAP based network is a wireless network service for wide area by deploying multiple MBS for such area. In this paper we assume multiple UAVs over designated area and solve the MBS placement and coverage problem by clustering the mobile ground nodes. For this study we assumed area around Cheju island and nearby naval area where multiple mobile and fixed nodes are deployed and requires HAP based networking service. By simulation, visual results of stratospheric MBS placement have been presented. These results include clustering, MBS placement and coverage as well as dynamic reclustering according to the movement of mobile ground nodes.

• Information and Communications Magazine
• /
• v.28 no.4
• /
• pp.41-50
• /
• 2011

미래 전에서는 정보의 중요성이 더욱 부각되고 있으며 정보의 수집 및 전파, 정확한 지휘결심 및 전파, 기동타격체계의 통제 등으로 이어지는 지휘통제의 전 과정을 유기적으로 연결하여, 그 성능을 극대화시키는 것이 네트워크 중심전(NCW: Net-Centric Warfare)의 개념이다. NCW 실현을 위해 개발중인 여러 체계 중 주목 받고 있는 것이 무인기(UAV: Unmanned Aerial Vehicle) 이다. 무인기는 감시정찰, 고정밀 타격, 그리고 전투피해평가 기능 등을 수행하며, 전술적인 상황인식이 가능하게 한다. 무인기가 이러한 임무를 수행하기 위해서는 비행체의 상태정보, 비행체의 조종통제정보, 그리고 임무 탑재체가 획득한 정보의 간단없고 정확한 전달이 요구된다. 이러한 정보를 전송하기 위한 비행체와 지상체간의 제반 통신을 데이터 링크(Data Link)라 하며, NCW 구현에 있어서 가장 핵심이 되는 요소이다. 세계 각국은 영상정보 수집자산으로서 무인기와 데이터링크의 개발에 박차를 가하고 있는 실정이며, 우리 군도 전력화가 계획된 각 제대별 무인기의 통합운용을 위한 영상정보 공용데이터 링크 (MPI-CDL: Multi-Platform Image and Intelligence Commom Data Link)를 개발중에 있으며 지속적인 영상정보 수집자산의 소요증가에 따른 주파수 획득문제와 사업별 독자적인 데이터 링크의 개발을 지양하고 기존체계와의 상호운용 및 단절없는 통신을 보장을 위해 개발과 동시에 국가적 차원에서의 기술구조 표준화가 추진되어야 한다. 이러한 시점에서 본고에서는 먼저 선진국의 (CDL : Commom Data Link) 표준화 동향을 알아보고, 상호운용성과 연동을 위한 한국형 MPI-CDL 기술 표준화방향을 제시하고자 한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.7
• /
• pp.531-538
• /
• 2017

A flush air data sensing system, which can predict flight speed, angle of attack, and angle of sideslip of the aircraft is designed and manufactured for a small UAV. Two kinds of flush pressure ports, four ports and five ports, are tapped at the same section of fuselage nose-cone. Calibration pressure data at flush ports are obtained through computations for the total aircraft by using Fluent code. Angle of attack, angle of sideslip, total pressure, and static pressure are represented with 4th-order polynomial function and calibration coefficient matrix is obtained using least square method with calibration pressure data. Flight test showed that flight speed, angle of attack, and sideslip angle predicted by four flush ports and five flush ports compared well with those by five-hole probe installed for data comparison. Especially four flush ports revealed nearly same results as those by five flush ports.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.8
• /
• pp.56-64
• /
• 2005

It is prerequisite that we have to fomulate the nonlinear mathematical modeling to design the guidance and control system of rotorcraft-based unmanned aerial vehicle using a small-scaled commercial helicopter. The small-scaled helicopters are very different from the full-scale helicopters in dynamic behavior such as high rotation speed and high frequency dynamic characteristics. In this paper, the formulation of the mathematical model of the small-scaled helicopter to minimize the complexity is presented by component and source build-up approach. It is linearized at the trim condition of hovering and forward flight and analyzed the flight modes. The results of this approach have general trends but a little difference. To verify this approach, it is necessary to compare this theoretical model with experimental results by system identification using flight test as a next research topic.

• The Journal of the Korea Contents Association
• /
• v.18 no.6
• /
• pp.303-313
• /
• 2018

The purpose of this study is digitalization of earthwork such as development of 3D terrain analysis platform using latest technologies including unmanned aerial vehicle and terrestrial laser scanner to ultimately achieve earthwork automation. It is necessary to develop related element technologies and to establish regulations so that it can be applied to the domestic construction projects. As a result of pilot project about the earthwork surveying automation technology, it was confirmed that information such as terrain coordinates, soil, boring, and excavation volume is acquired smoothly. In this paper, we investigate related regulations and manuals in Japan and propose the improvement plan of domestic regulation. We plan to study regulations from early to final construction stage, combine with the 'regulation for public surveying', and improve the regulations in detail.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.848-853
• /
• 2004

Regarding to the project SUAV (Smart Unmanned Aerial Vehicle) in KARI (Korea Aerospace Research Institute), several engine configurations has been evaluated. However it's not an easy task to collect all the necessary data of each engine for the analysis. Usually, some kind of modeling technique is required in order to determine the unknown data. In the present paper a qualitative method for reverse engineering is proposed, in order to identify some design patterns and relationships between parameters. The method can be used to estimate several parameters that usually are not provided by the manufacturer. The method consists of modeling an existing engine and through a simulation, compare its transient behavior with its operating envelope. In the simulation several parameters such as thermodynamics, performance, safety and mechanics concerning to the definition of operation-envelope, have been discussed qualitatively. With the model, all engine parameters can be estimated with acceptable accuracy, making possible the study of dependencies among different parameters such as power-turbine total inertia, TIT, take-off time and part load, in order to check if the engine transient performance is within the design criteria. For more realistic approach and more detailed design requirements, it will be necessary to enhance the compressor map first, and more realistic estimated values must be taken into account for intake-loss, bleed-air and auxiliary power extraction. The relative importance of these “unknown” parameters must be evaluated using sensitivity analysis in the future evaluation. Moreover, fluid dynamics, thermal analysis and stress analysis necessary for the resulting life assessment of en engine, will not be addressed here but in a future paper. With the methodology presented in the paper was possible to infer the relationships between operation-envelope and engine parameters.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.9
• /
• pp.833-841
• /
• 2016

The 200 W electrically powered unmanned aerial vehicle, which is studied in this research, uses solar cells, a fuel cell and batteries as the main power source simultaneously. The output of each power source performs power control for each power source by the active power control method so that an adequate capacity of the battery could be maintained while limiting the maximum output of the fuel cell. The output variation for each power source under the active power control method was identified through an integrated ground test. In addition, the effect of limiting the maximum output of the fuel cell on the output variation of the entire system was experimentally identified, and it was confirmed that the adequate maximum output value of the fuel cell for preventing the overdischarge of six series-connected, small size batteries for fuel cell systems is 150 W.