• Korean Journal of Metals and Materials
• /
• v.46 no.12
• /
• pp.780-787
• /
• 2008

For the advanced high strength steels (AHSS), high-manganese TWIP (twinning induced plasticity) steels exhibit high tensile strength (800-1000 MPa) and high elongation (50-60%). However, the TWIP steels need to be understood of delayed fracture following the cup drawing test. Among the factors to cause delayed fracture, i.e, martensite transformation, hydrogen embrittlement and residual stress, the effects of martensite transformation (${\gamma}{\rightarrow}{\varepsilon}$ or ${\gamma}{\rightarrow}{\alpha}^{\prime}$) were investigated on the delayed fracture phenomenon. Microstructural phase analysis was conducted for cold rolled (20, 60, 80% reduction ratio) steels and tensile deformed (20, 40, 60% strain) steels. For the Al-added TWIP steels, no martensite phase was found in the cold rolled and tensile deformed specimen. But, the TWIP steels with no Al addition indicated the martensite transformation. The cup drawing specimens showed the martensite transformation irrespective of the Al-addition to the TWIP steel. However, the TWIP steel with no Al exhibited the larger amount of martensite than the case of the TWIP steel with Al addition. For the reason, it was possible to conclude that the Al addition suppressed the martensite transformation in TWIP steels, therefore preventing the delayed fracture effectively. However, it was interesting to note that the mechanism of delayed fracture should be incorporated with hydrogen embrittlement and/or residual stress as well as the martensite transformation.

• Korean Journal of Ichthyology
• /
• v.19 no.2
• /
• pp.83-87
• /
• 2007

Edwardsiella tarda, a gram (-) pathogen causing edwardsiellosis in farmed fish, was transformed via electroporation with a plasmid expression vector driving the PhiX174 E-lysis gene under the transcriptional control by lambda PR regulatory sequence. The persistent maintenance of the plasmid vector in recombinant E. tarda was found in numerous subculture procedures over up to 6 months without any adverse effect on the original copy number of plasmids. Comparative examination based on semi-quantitative RT-PCR analysis on transcriptional efficiency of E-lysis gene between recombinant E. coli and E. tarda indicated that promoter strength and induction capacity of bacterial ghosts would be retarded in E. tarda as compared to the E. coli. However, the completeness of induction for bacterial ghosts in E. tarda was the same with E. coli, in which at least 99.99% of induction rate was possible and further the viability of recombinant bacteria was completely eliminated by a post-induction procedure including washing and freeze drying lyophilization.

• Journal of the Korean Society for Heat Treatment
• /
• v.13 no.4
• /
• pp.265-271
• /
• 2000

The microstructural change and transformation characteristics with cooling rate i.e. wheel speed were investigated in 82.8wt%Cu-12.8wt%Al-4.3wt%Ni SMA ribbons fabricated by melt-spinning. The thickness and width of ribbon were decreased with increasing wheel speed, while the uniformity of it was improved. At same wheel speed, the grain size of the contact surface of ribbon was smaller than that of free surface. The mean grain size was decreased with increasing wheel speed, resulted in obtaining grains with $3{\mu}m$ in mean diameter in the wheel speed of 30 m/s. However, micro-voids and cracks at grain boundary could be observed at higher wheel speed. $M_s$ and $A_s$ temperatures were decreased, and $M_s{\sim}M_f$ and $A_s{\sim}A_f$ temperature ranges were broadened with increasing wheel speed. All the ribbons were retained the ordered $D0_3$ due to rapid cooling, the volume fraction of it was increased with increasing wheel speed.

• International Journal of Ocean System Engineering
• /
• v.1 no.1
• /
• pp.28-31
• /
• 2011

An attempt was made to compute the free surface deformation due to the impact of a water droplet. The Cauchy Poisson, i.e. the initial value problem, was solved with the kinematic and dynamic free surface boundary conditions linearized. The zero order Hankel transformation and Laplace transform were applied to the related equations. The initial condition for the free surface profile was derived from a captured video image. The effect of the surface tension was not significant with the water mass used in this investigation. The computed and observed free surface deformations were compared.

• Journal of the Korean Society for Heat Treatment
• /
• v.5 no.3
• /
• pp.149-156
• /
• 1992

Transformation behavior and reversible shape memory effct of Ti-Ni-Cu alloys with various Cu content has been investigated by means of electrical resistivity measurement, differential scanning calorimetry. X-ray diffraction and strain gage sensor. The transformation sequence in Ti-Ni-Cu alloys substituted by Cu for Ni up to 5at.% occurs to $B2{\leftrightarrow}B19^{\prime}$ and it proceeds in two stages by addition of 10 at.%Cu. i.e. $B2{\leftrightarrow}B19{\leftrightarrow}B19^{\prime}$. But the content of Cu increases up to 20at.%, it has been transformed in one stage ; $B2{\leftrightarrow}B19$. The shape change of Ti-40Ni-10Cu alloy which was constrain aged in circular form bended in $B2{\leftrightarrow}B19$ transformation but it spreaded out in $B19{\leftrightarrow}B19^{\prime}$ transformation. The amount of reversible shape change (${\Delta}{\varepsilon}$) of Ti-47Ni-3Cu alloy constrain aged at $400^{\circ}C$ after solution treatment has a maximum value of about $5.6{\times}10^{-3}$, but that of cold rolled and constrain aged specimens exhibits a little value independent of Cu concentrations.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2008.11a
• /
• pp.191-192
• /
• 2008

• Proceedings of the CALSEC Conference
• /
• 2005.03a
• /
• pp.143-148
• /
• 2005

The purpose of this paper is to analyze pricing strategies between conventional offline retailers and Internet retailers and discuss which strategy is more profitable when a bricks-and-mortar firm transforms into a clicks-and-mortar firm.

• Archives of Pharmacal Research
• /
• v.4 no.1
• /
• pp.25-31
• /
• 1981

The ginsenosides of Korean ginseng decomposed profoundly to produce artifact products of prosapogenin $A_{1}$, $A_{2}$ and $A_{3}$ from ginsenoside Rg$_{1}$, prosapogenin $C_{1}$, $C_{2}$ and $C_{3}$ from ginsenoside Re, and prosapogenin E$_{1}$, E$_{2}$ and E$_{3}$ from ginsenoside Rb$_{1}$ by the acid treatment under physiological condition such as 37.deg.C incubation in 0.1 N HCI. 2. The chemical structures of the artifact substances were determined by the analysis CMR and mass spectra of TMS derivatives as following; table omitted.

• Natural Product Sciences
• /
• v.26 no.4
• /
• pp.283-288
• /
• 2020

Microbial transformation of a potent progestin, norethisterone (17��-hydroxy-19-nor-17α-pregn-4-en-20-yn-3-one) (1) was carried out by using two filamentous fungi Aspergillus niger and Penicillium citrinum. Biotransformation of 1 with A. niger yielded a hydroxylated transformed product 10��,17��-diydroxy-19-nor-17α-pregn-4-en-20-yn-3-one (2) whereas 11��,17��-diydroxy-19-nor-17α-pregn-4-en-20-yn-3-one (3) was obtained through microbial transformation of 1 by P. citrinum. It is the first report of their production from 1 by using A. niger and P. citrinum with complete 1H- and 13C-NMR assignment. The structures of both metabolites were characterized by various spectroscopic techniques and reported data.

• Journal of Korean Vacuum Science & Technology
• /
• v.5 no.2
• /
• pp.43-46
• /
• 2001

Fe-Au alloys are characterized by the complete solubility, and exhibit an fcc-bcc structural transformation at the Fe-rich side. The magneto-optical(equatorial Ken effect : EKE) and optical properties of Fe$\_$1-x/Aux (0 < x < 1) were investigated in the 0.5 - 5.0 eV energy range. The x-ray diffraction study shows the structural fcc-bcc transformation about 80 at. % of Fe. Noticeable changes in the optical properties caused by the fcc-bcc structural transformation was observed. The shape and intensity of the EKE spectra as well as the field dependence of the magneto-optical response were also significantly changed. It is thought that these changes are mainly comes from the induced magnetic moment in Au(and/or the emhanced magnetic moment of Fe). The nature of the prominent structure observed in the UV range of the magneto-optical Ken effect of Au/Fe multilayered films are disscussed in connection with the above results.