• 대한간호학회지
• /
• 제20권1호
• /
• pp.16-37
• /
• 1990

A cost analysis for hospitalized patients was carried out based upon Patient Classification System(PCS) in order to determine an appropriate nursing fee. The data were collected from 21 nursing units of three teaching hospitals from April 1 to June 30, 1989. first, all of the 22,056 inpatients were classified into mildly ill(Class Ⅰ), moderately ill(Class Ⅱ), acutely ill(Class Ⅲ), and critically ill(Class Ⅳ) by the PCS which had been carefully developed to be suitable for the Korean nursing units. Second. PCS cost accounting was applied to the above data. The distribution of inpatients, nursing costs, and nursing productivity were as follows : 1) Patient distribution ranged from 45% to class Ⅰ, 36% to class Ⅱ, 15% to class Ⅲ, and 4% to class Ⅳ, the proportion of class Ⅳ in ‘H’ Hospital was greater than that of the other two hospitals. 2) The proportion of Class Ⅲ and Ⅳ in the medical nursing units was greater than that of surgical nursing units. 3) The number of inpatients was greatest on Tuesdays, and least on Sundays. 4) The average nursing cost per hour was W 3,164 for ‘S’ hospital, W 3,511 for ‘H’ hospital and W 4,824 for ‘K’ hospital. The average nursing cost per patient per day was W 14,126 for ‘S’ Hospital, W 15,842 for ‘H’ hospital and W 21,525 for ‘K’ hospital. 5) The average nursing cost calculated by the PCS was W 13,232 for class Ⅰ, W 18,478 for class Ⅱ, W 23,000 for class Ⅲ, and W 25,469 for class Ⅳ. 6) The average nursing cost for the medical and surgical nursing units was W 13,180 and W 13,303 respetively for class Ⅰ, W 18,248 and W 18,707 for class Ⅱ, W 22,303 and W 23,696 for class Ⅲ, and W 24,331 and W 26,606 for class Ⅳ. 7) The nursing costs were composed of 85% for wages and fringe benefits, 3% for material supplies and 12% for overhead. The proportion of wages and fringe benefits among the three Hospitals ranged from 75%, 92% and 98% for the ‘S’, ‘H’, ‘K’ hospitals respectively These findings explain why the average nursing cost of ‘K’ hospital was higher than the others. 8) According to a multi- regression analysis, wages and fringe benefits, material supplies, and overhead had an equal influence on determining the nursing cost while the nursing hours had less influence. 9) The productivity of the medical nursing units were higher than the surgical nursing units, productivity of the D(TS) - nursing units was the lowest while the K(Med) - nursing unit was the highest in 'S' hospital. In ‘H’ hospital, productivity was related to the number of inpatients rather than to the characteristics of the nursing units. The ‘K’ hospital showed the same trend as ‘S’ hospital, that the productivity of the medical nursing unit was higher than the surgical nursing unit. The productivity of ‘S’ hospital was evaluated the highest followed by ‘H’ hospital and ‘K’ hospital. Future research on nursing costs should be extended to the other special nursing areas such as pediatric and psychiatric nursing units, and to ICU or operating rooms. Further, the PCS tool should be carefully evaluated for its appropriateness to all levels of institutions(primary, secondary, tertiary). This study took account only of the quantity of nursing services when developing the PCS tool for evaluating the productivity of nursing units. Future research should also consider the quality of nursing services including the appropriateness of nursing activities.

• Advances in materials Research
• /
• 제11권1호
• /
• pp.41-57
• /
• 2022

This paper is focused on delamination analysis of a multilayered inhomogeneous viscoelastic beam subjected to linear creep under constant applied stress. The viscoelastic model that is used to treat the creep consists of consecutively connected units. Each unit consists of one spring and two dashpots. The number of units in the model is arbitrary. The modulus of elasticity of the spring in each unit changes with time. Besides, the modulii of elasticity and the coefficients of viscosity change continuously along the thickness, width and length in each layer since the material is continuously inhomogeneous in each layer of the beam. A time-dependent solution to the strain energy release rate for the delamination is derived. A time-dependent solution to the J-integral is derived too. A parametric analysis of the strain energy release rate is carried-out by applying the solution derived. The influence of various factors such as creep, material inhomogeneity, the change of the modulii of elasticity with time and the number of units in the viscoelastic model on the strain energy release rate are clarified.

• East Asian mathematical journal
• /
• 제33권4호
• /
• pp.353-380
• /
• 2017

The purpose of this study is to analyze the multiplication units in the elementary school mathematics. In the 2015 revised curriculum, students learn multiplication in $2^{nd}$ grade. The multiplication units is divided into two: multiplication and multiplication facts. In these two units, we mainly analyze situations involving multiplication, models for teaching multiplication, and multiplication strategies for teaching multiplication facts in relation to Subject Matter Knowledge. We called these contents Multiplication Matter Knowledge. We examined the precedent study with regard to multiplication at the elementary mathematics. As results, we prepared an analysis framework for this study. This study was conducted according to qualitative research methods, expecially 'qualitative contents analysis'. The contents here refer to Multiplication Matter Knowledge that can be found in the elementary mathematics textbooks and working books etc. As results of analysis, We can confirm that various multiplication situations and multiplication models are presented in the textbooks. And it has been examined that various multiplication properties are presented in the textbook according to the multiplication strategy levels. We insist elementary school teachers should be aware of these Multiplication Matter Knowledge. This study aims to provide elementary school teachers with basic data in these contexts.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1105-1108
• /
• 2004

This paper describes the structural analysis result and load test result of accident EMU(Electric Multiple Units). Structural analysis and load test of EMU were performed for the criteria of safety assessment. Structural analysis using commercial I-DEAS software provided important information on the stress distribution and load transfer mechanisms as well as the amount of damages during rolling stock crash. The purpose of the load test is to evaluate a safety which carbody structure shall be considered fully sufficient rigidity so as to satisfy proper system function under maximum load and operating condition. The results have been used to provide the critical information for the criteria of safety assessment.

• 산업경영시스템학회지
• /
• 제44권3호
• /
• pp.39-49
• /
• 2021

The Korean Air-Force aircraft maintenance depot paints the exterior of various aircraft, including high-tech fighters. Aircraft exterior painting is a maintenance process for long-term life management by preventing damage to the aircraft surface due to corrosion. The de-painting process is essential to ensure the quality of aircraft exterior paints. However, because the Korean Air-Force's de-painting process is currently done with sanding or Plastic Media Blasting (PMB) method, it is exposed to harmful dust and harmful compounds and consumes a lot of manpower. This study compares the de-painting process currently applied by the ROK Air-Force and the more improved process of the US Air Force, and performs economic analysis for the introduction of advanced equipment. It aims to provide information that can determine the optimal time to introduce new facilities through Cost-Volume-Profit (CVP) analysis. As a result of the analysis, it was confirmed that the sanding method had the most economical efficiency up to 2 units per year, the PMB method from 3 to 21 units, and the laser method from 22 units or more. In addition, in a situation where the amount of de-painting work is expected to increase significantly due to the increase in fighters in future, BEP analysis was conducted on the expansion of the existing PMB method and the introduction of a new laser method. As a result of the analysis, it was confirmed that it is more economical to introduce the laser method when the amount of work exceeds the PMB work capacity(18 units per year). The paper would helpful to improve the productivity and quality of the Korean Air Force Aircraft maintenance depot through timely changes of facilities in the workplace in preparation for expansion.

• 한국콘텐츠학회논문지
• /
• 제20권6호
• /
• pp.256-266
• /
• 2020

산업의 공간적 입지에 대한 분포 패턴 분석은 관련된 공간정책 및 계획의 수립에 있어 매우 중요한 역할을 한다. 이러한 분석에 있어 먼저 고려되어야 하는 것은 어떠한 분석지표와 공간단위를 활용하는가에 있는데, 이는 지표와 공간단위에 따라 그 해석이 달라질 수 있기 때문이다. 이에 본 연구는 먼저 공간적 자기상관을 고려한 다양한 산업집적 지표들을 고찰하고 관련 지표에 따른 산업집적의 지역유형을 구분하며, 다음으로 개별입지, 그리드, 행정구역 등의 다양한 공간단위별 산업집적을 분석하는 방법론을 제시하여 뿌리산업에 대해 실증분석 하는 것을 목표로 한다. 실증분석 결과를 보면 공간단위에 있어서 그리드 단위가 행정구역 단위보다 세밀한 미시적 분석이 가능함을 알 수 있었고, 공간단위의 설정에 따라 발생할 수 있는 해석상의 차이와 같은 한계를 극복할 수 있는 것으로 기대된다. 지역유형 구분에 있어서는 울산광역시, 부산광역시, 창원시를 축으로 하는 동남권과 인천광역시, 화성시, 안산시를 축으로 하는 수도권 서부축이 뿌리산업의 산업집적 클러스터 지역유형으로 분석되었다.

• 한국초등과학교육학회지:초등과학교육
• /
• 제21권2호
• /
• pp.201-212
• /
• 2002

This paper aims to find out how did elementary students understand scientific units in science textbooks. The subjects were 191 students of the 6th grade from 7 elementary schools in 3 different areas, consisting of 70 from 4 village schools of, 64 from 2 town schools of Gyeongnam province, and 57 from one city school in Ulsan Metro City. A test was developed based on the analysis of scientific units in the science textbooks and teacher's manuals constructed according to the 6th and 7th National Science Curriculum. The understanding of elementary students' on the scientific units(Temperature, Length, Weight, Volume, Speed, Plane Angle) were surveyed. The result are as follows: Regarding the temperature unit, the students generally well understand why to measure and how to read temperature, but had some problem in recording it, in confusion with the plane angle sign. As for the length unit, they obtained high scores in understanding the purpose of measuring length as well as recording and reading it. Which indicates that they are well aware of and use the unit appropriately. With respect to the weight unit, they got high scores in reading and recording weight, which means most students have no problem using the unit. However, it was found that they do not understand why to use the plate balance scale. The volume unit was one in which the students got relatively lower scores. They do not perceive the object of using a scale cylinder and confuse it with a device of length measurement. The unit of speed is the most difficult one for children's of science to understand, presumably, because it is an derived unit from two basic units. It is also assumed that the students got the highest score in the plane angle unit because they studied the unit immediately before the test. From the children's understanding of science units above the teacher's understanding and teaching methods presumed to play a major role for children to understand and use the science units properly.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.416-421
• /
• 2010

The north and south panel of a geostationary satellite are used for radiator panels to reject internal heat dissipation of electronics units and utilize several heat pipe networks to control the temperatures of units and the satellite within proper ranges. The design of these panels is very important and essential at the conceptual design and preliminary design stage so several thousands of nodes of more are utilized in order to perform thermal analysis of panel. Generating a large number of nodes(meshes) of the panel takes time and is tedious work because the mesh can be easily changed and updated by locations of units and heat pipes. Also the detailed panel model can not be integrated into spacecraft thermal model due to its node size and limitation of commercial satellite thermal analysis program. Thus development of a program was required in order to generate detailed panel model, to perform thermal analysis and to make a reduced panel model for the integration to the satellite thermal model. This paper describes the development and the verification of panel thermal analysis program with ist main modules and its main functions.

• 한국재료학회지
• /
• 제15권12호
• /
• pp.786-790
• /
• 2005

We investigated the particularity of temperature and composition changes in $xNa_2O{\cdot}(52.5-x)B_2O_3{\cdot}47.5SiO_2$ glasses by use of FT-IR, $^{11}B$ NMR, Raman spectrometer. From FT-IR and $^{11}B$ NMR spectrometer, we thought that tetrahedral boron, $BO_4$ units are created $N_4$ increasing tendency generated near $600^{\circ}C$. It's expected that composition ana heat treatment directly contributed to structural changes, this changes are following to $Na_2O$ increasing or decreasing. caused by $N_4\;and\;BO_4$ units are caused by relatively increasing or decreasing in the glasses' structure. Particularly, $BO_4$ units are converted to $BO_3$ units after $600^{\circ}C$ heat treatment for 50h in the composition of $x<18(R<0.5,\;R=Na_2O/B_2O_3\;mol\%)$. On the order hand, $BO_3$ units are converted to, $BO_4$ units after $600^{\circ}C$ heat treatment for 50h in the composition of $x{\geq}18\;(R>0.5)$. This particularity of composition and temperature dependence of structural changes are similarly represented by Raman analysis results.

• 대한간호학회지
• /
• 제29권2호
• /
• pp.346-360
• /
• 1999

The purpose of this research was to identify nursing interventions performed by hospital nurses in Korea. The sample consisted of 311 nurses working in three hospitals. The Nursing Interventions Use Questionnaire developed by the Iowa Intervention Project team was used for data collection. The instrument was translated to Korean using the method of back-translation. Eighteen interventions were performed at least daily. Interventions in the Physiological : Basic domain were most frequently used at least daily. No interventions in the Family and Behavioral domains were used by nurses at least once a day. The most frequently used interventions was Documentation, followed by the interventions Medication : Parenteral, Intravenous(IV) Insertion, Temperature Control, and Shift Report. The intervention performed least often was Reproductive Technology Management. Nurses working in intensive care units on the whole performed interventions most often, while nurses working in obstetric, gynecological, and pediatric units performed them least often. The nurses working in intensive care unit, medical and surgical care units performed the interventions in the Physiological : Basic domain more often than the nurses working in obstetric, gynecological, and pediatric units. The nurses working in obstetric, gynecological, and pediatric units used the interventions in the Family domain more often than the nurses working in the other three units. This study contributes to the documentation of nursrs' work in Korea. Further study will be needed to validate nursing activities of each NIC intervention.