• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.5
• /
• pp.592-598
• /
• 2007

The fuel charge is getting higher in navigation cost. Therefore, shipowners try to find the method for reducing oil consumption. ESS(Energy Saving System) is one of he method. ESS is the system consisted with two inverters, ESS control unit and monitoring system. Two inverters control two main sea water cooling pumps. In the ESS control Unit, the control algorithm finds optimized point to decrease a power consumption of main sea water cooling pumps. Monitoring system observes ESS not to work improperly. ESS is experimented in the laboratory with real condition and analyzed in every view. After experiment, the result of the experiment shows that the control algorithm works correctly and safely. ESS has a plan to be operated in the ship soon. In that case, additional devices are needed to connect ESS with cooling system of the vessel. So the development of addition device is needed and being studied.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.3
• /
• pp.996-1006
• /
• 2017

Phasor Measurement Unit (PMU) placement is a crucial problem for State Estimation (SE) of the power system, which can ensure that the power network is fully observed. Further, the observation reliability problem of the system has been concerned in the operation conditions. In this paper, based on modified weighted adjacent matrix ($A_w$), an optimal placement method is proposed to solve simultaneously two problems involving the optimal PMU placement problem and the observation reliability enhancement problem of the system. The purpose of the proposed method is to achieve both the minimum total cost and the maximum observation reliability, with a focus on increasing the security of observability, strengthening the observation reliability of buses as well as enhancing the effectiveness of redundancy. Simulations on IEEE 14, 24, 30 and 57 bus test systems are presented to justify the methodology. The results of this study show that the proposed method is not only ensuring the power network having the observability effectively but also enhancing significantly the observation reliability. Therefore, it can be a useful tool for SE of the power system.

• Transactions of Materials Processing
• /
• v.21 no.4
• /
• pp.234-239
• /
• 2012

This study examines the forming properties and forming loads needed to increase the edge thickness on the external face of a plate using finite element analysis(FEA). Recently, forming optimization techniques within FEA are being extensively used in designing the optimal forming conditions for processes like forging, extrusion, rolling, and spinning. Most of these existing forming operations involve reducing the volume per unit length, but research for increasing volume per unit length is not very extensive. For this study we chose an automotive engine flywheel which is a welded assembly of a plate and a gear with each component having a different thickness. We considered a forming technique to increase the thickness in order to allow the machining of the gear directly on the external face of plate alleviating the need for a weld. To study various forming techniques, we used the finite element method with the flow stress of material and incremental forming steps. We conclude from this study that the analysis of forming properties and forming loads by using the finite element analysis and testing is useful as a method to increase the thickness per unit length.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.128-134
• /
• 2016

Estimating the repair and reinforcement (R&R) costs for each bridge member is essential for managing the life cycle of a bridge using a bridge management system (BMS). Representative members of a bridge were defined in this study, and detailed and representative R&R methods for each one were drawn in order to develop a systematic maintenance cost model that is applicable to the BMS. The unit cost for each detailed R&R method was established using the standard of estimate and historical cost data, and a systematic procedure is presented using an integration program to enable easy renewal of the R&R unit cost. Also, the average unit cost of the representative R&R methods was calculated in the form of a weighted average by considering the unit cost and application frequency of each detained R&R method. The appropriateness of the drawn average unit cost was reviewed by comparing and verifying it with the previous historical unit cost. The suggested average R&R unit cost can be used to review the validity of the required budget or the appropriateness of the R&R performance cost in the stage to establish the bridge maintenance plan. The results of this study are expected to improve the reliability of maintenance cost information and the rationality of decision making.

• Journal of Advanced Navigation Technology
• /
• v.18 no.1
• /
• pp.35-43
• /
• 2014

In this paper, it is about to non-contact wireless power transmission according to various conditions of self induction principle between the two planar coils at a transmission unit and a receiving unit based on the theory of wireless power transmission. The experiments are occurred in order to power transfer of noncontact method from designed wireless circuits in the primely coil and secondary coil, and the applying to Half Bridge Resonant converter transmission unit and receiving unit. and that were able to prepared circumstance to calculate of the output voltage and power source. The main power of the inductive coupling the resonant converter at the transmission unit is converted electrical energy using the solar cell module and artificial light source (halogen lamp) as a replace light and received 24 V power supply from solar power was used a input power source for the wireless power transmission device. Experimental results, to received of power is used to illuminate the lighting and to charge the battery in receiving circuit.And the wireless power transmission efficiency measured at the output side of the transmission unit is obtained about 70% to 89% compared to input power of receiving unit.In addition, efficiency were tested through ID verification method and comparing the phase difference between the voltage when foreign substances interfere with wireless power transmission.

• ETRI Journal
• /
• v.29 no.6
• /
• pp.794-807
• /
• 2007

In the mobile Internet, users generally work with handheld devices with limited computing power and small screens. Their access conditions also change frequently. In this paper, we present a novel method supporting intelligent content adaptation to better suit handheld devices. The underpinning is a unit of information (UOI)-based content adaptation method, which automatically detects semantic relationships among the components of Web contents and then reorganizes page layout to fit handheld devices based on identified UOIs. Experimental results demonstrate that our method enables more sensitive content adaptation.

• Journal of information and communication convergence engineering
• /
• v.8 no.3
• /
• pp.312-316
• /
• 2010

Conformal mapping has been a familiar tool of science and engineering for generations. The methods of numerical mapping are usually classified into those which construct the map from standard domain such as the unit disk onto the 'problem domain', and those which construct the map in the reverse direction. We treat numerical conformal mapping from the unit disk onto the Jordan regions as the problem domain in this paper. The traditional standard methods of this type are based on Theodorsen integral equation. Wegmann's method is well known as a Newton-like efficient one for solving Theodorsen equation. An improved method for convergence by applying low frequency pass filter to the Wegmann's method was proposed. In this paper we propose an effective algorithm for numerical conformal mapping based on the improved method. This algorithm is able to determine the discrete numbers and initial values automatically in accordance with the given region and the required accuracy. This results come from analyzing the shape of given domain as seen in the Fourier Transform.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1098-1100
• /
• 1999

This paper proposes a method of solving a unit commitment problem using tabu search (TS). The TS is efficient optimization method using meta-heuristic. To improve the diversification properties of TS, path relinking method is introduced. To show the usefulness of the proposed method, we performed an experiment for the system of 10 units. Numerical results show improvements in the generation cost and the computation time compared to previously obtained results.

• Journal of Environmental Science International
• /
• v.15 no.5
• /
• pp.493-501
• /
• 2006

The increase in environmental loads and energy consumptions has resulted in the need of developed new forms of energy for a sustainable use for the society. Recently, the viability of using unused energy has attracted a great deal of attention. From the view point of using unused energy, the most critical problem can be referred to as the distance between the heat source/sink and heat demand area. The water resource in the city water system was used to solve this distance problem with unused energy. The calculation method of the potential use unit was used to survey the potential of the water resource in the city water system. The amount of theoretical unused energy and energy savings in the model city were estimated using this method. It is estimated that the amounts of energy savings and $CO_2$ reduction correspond to 131.3 GWh and 29280[t-C], respectively, per annual basis.

• Speech Sciences
• /
• v.6
• /
• pp.83-101
• /
• 1999

The aim of this study is to provide a learning method of prosodic rhythm for Taegu North Kyungsang Korean speakers to learn French rhythm more effectively. The rhythmic properties of spoken French and Taegu North Kyungsang Korean dialect are different from each other. Therefore, we try to provide a basic rhythmic model of the two languages by dividing into three parts: syllable, rhythmic unit and accent, and intonation. To do so, we recorded French of Taegu Kyungsang Korean speakers, and then analysed and compared the rhythmic properties of Korean and French by spectrograph. We tried to find rhythmic mistakes in their French pronunciation, and then established a learning model to modify them. After training with the CSL Macro learning model, we observed the output result. However, although learners understand the method we have proposed, an effective method which is possible by repeating practice must be arranged to be actually used in direct verbal communications in a well-developed learning programme. Hence, this study may play an important role at the level of preparation in the setting of an effective rhythmic learning programme.