• Microbiology and Biotechnology Letters
• /
• v.30 no.1
• /
• pp.73-78
• /
• 2002

Four inorganic packing materials (zeocarbon, porous celite, porous glass, zeolite) and a earthworm cast were compared with regard to the removal of ammonia in a biofilter inoculated with earthworm cast. Physical adsorption of ammonia on packing materials were negligible except zeocarbon (23.5 g-$NH_3$/kg), and cell immobilization capacity have similar values irrespective of packing materials. Pressure drops of the packed bed were in order of earthworm cast zeocarbon zeolite porous glass porous. The maximum elimination capacity ($g-Nkg^{-1}$ $d^{-1}$ ) of ammonia, which were based on a unit volume of packing material, were in order of zeocarbon (526) earthworm cast (220) porous celite (93) > zeolite (68) > porous glass (53). By using kinetic analysis, the maximum removal rates ($V_{m}$ ) and the saturation constant ($K_{s}$ ) for ammonia were determined, and zeocarbon showed superior performance among the five materials.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.12
• /
• pp.2806-2818
• /
• 1997

It is generallyaccepted that broadband access technologies will play an important role in the National Information Infrastructure. However, the provision of direct fibers to residential and small business customers has always been considered a challenge. To accelerage the provision of Broadband Access Facilities, alternatibe paths could be identified and actaivated in parallel. In this paepr, we present an overview of the alternative access technologies focusing on xDSL, FTTx, HFC, HFR, and suggest the modeling of the access netetwork systems which is using of the technologies. Also to investigate the economics of each access systems, we derve the numerical equations which is summed up the al parameter including the labor cost of the model system. The proposed equation has a variable which is the cell size (or subsciber clusters) and calculate the real cost values which is normalized by the copper cable unit cost. From the numerical resutls, we conclude that the economic access method to provide these broadband capabilities is depended on the subscriber penetration, the patterns of subscriber distribution density and existing communication infrastructures. It can be expected that our analytical model and equations provides an elegant solution to choose the optimal broadband access technologies to residential and small business customers.

• Journal of the Korean Society of Safety
• /
• v.20 no.3 s.71
• /
• pp.134-142
• /
• 2005

This study is to find out how organic solvent will be propagated from painting inside the steel box girder of bridge. $2.9m{\times}3.0m$ of inside size of steel box girder is not suitable for painters to do his work comfortably and hygienically. Substance density(ppm)inside the space of the box unsatisfactory hygienical condition. Most of organic solvent(mainly toluene) came down to 0.5m in two minutes and 53sec. But personal protection for painter should be properly kept against flying this heavy organic solvent. longitudinally 27.1m in length is a cell unit of the whole length of bridge. Model XP-3l6A made in Japan is a main instrumentation adjusted to sense organic solvent especially toluene which can be measured up to 10,000ppm. Scenario analysis by computer program, safer release 2.0 has been performed first to estimate how the organic solvent will be propagated. And then actual test was done as a model. This has been measured for approximately five(5) minutes, with 30 sec interval. Actual measurement results showed much higher $10{\sim}20%$ than result analyzed by the computer program, meaning that this painting work can give worse effect to the worker who is painting inside the box girder of the bridge. The first meas urement level over the floor set up at 30cm height from the floor, because organic solvent was estimated to stay at the level. and then, they were measured at 1.0m, 1.5m level respectively, more.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.371-372
• /
• 2005

Supercapacitors are promising devices for delivering high power density. Digital communications, electric vehicles and other devices that require electrical energy at high power levels in relatively short pulses have prompted considerable research on supercapacitors. In recent years, solid electrolytes have been investigated for supercapacitors. Solid electrolytes are advantageous over liquid electrolytes in respect of easy handling and reliability without electrolyte leakage. In this preliminary study, an electrochemical supercapacitor in all solid configuration has been fabricated using CNF-DAAQ and poly-vinylidenefluoride(PVdF). A new type of Supercapacitor was constructed by using carbon nanofibers(CNFs) and DAAQ(l,5-diaminoanthraquinone) monomer. DAAQ was deposited on the carbon nanofibers by chemical polymerization with $(NH_4)_2S_2O_8$ as oxidant in the 0.1M $H_2SO_4$. Dried SPEEK powder was mixed with N-methyl pyrrolidone to make 10 wt.% solution in an ultrasonic bath, the slurry was cast over a glass substrate heated to $70^{\circ}C$ for solvent evaporation. And then we used solid electrolyte of SPEEK. The unit cell consist of DAAQ-CNF/electrolyte/Pt. From the analysis, it is clear that surface of carbon nanofibers was quite uniformly coated with DAAQ. The performance characteristics of the supercapacitors have been evaluated using Cyclic Voltammetry.

• Land and Housing Review
• /
• v.11 no.1
• /
• pp.109-116
• /
• 2020

This study aims to establish an approach to assess urban flood vulnerability by identifying social characteristics such as the road transportation and the vulnerable groups. Assessment procedures comprise three steps as: (1) composing the assessment criteria to reflect the urban characteristics; (2) calculating the weight; and (3) evaluating the vulnerability. The criteria were adopted by Delphi survey technique. Four criteria as land cover, residents, vulnerable areas, and disaster response were adopted in the current study. To determine the weight set of criteria, subjective and objective methods were combined. The weight set was determined using the combined method which reflects the Delphi method and Entropy analysis. In the process of data-based construction, GIS tools wwere used to extract administrative unit materials such as land cover, road status, and slope. Data on population and other social criteria were collected through the National Statistical Office and the Seoul Metropolitan statistical data. TOPSIS (Technique for Order of Preference by Similarity to Ideal Solution) technique, which uses materials from cell units in order to rank the closest distance to the best case and the farthest distance from the worst case by calculating the distances to the area of assessment, was applied to assess. The study area was the Dorimcheon basin, a flood special treatment area of Seoul city. The results from the current study indicates that the established urban flood vulnerability assessment approach is able to predict the inherent vulnerable factors in urban regions and to propose the area of priority control.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2246-2252
• /
• 2009

A new metamaterial antenna with dual resonant modes is presented using an asymmetrical periodic arrangement for orthogonal radiation patterns. The proposed antenna produces two orthogonal modes by the asymmetrical periodic unit-cell arrangement. The orthogonal resonant mode provides perpendicular radiation patterns without changing the antenna polarization at each resonant mode. The fabricated antenna shows good agreements with the theoretical analysis of the electric-field. The experimental results shows the orthogonal radiation patterns along x- and y-axises, and gains are 3.34 and 3.86 dBi at each radiating resonant mode, respectively. Additionally, slotted ground structures are embedded on the back side of the antenna in order to reduce the size and enhance the radiation efficiency of 12 % and 27 %, respectively.

• Geomechanics and Engineering
• /
• v.6 no.2
• /
• pp.173-194
• /
• 2014

Laboratory and field data showed that deep mixed (DM) columns accelerated the rate of consolidation of the soft foundations. Most analyses of consolidation of DM column-improved foundations so far have been based on the elastic theory. In reality, the DM columns may yield due to the stress concentration from the soft soil and its limited strength. The influence of column yielding on the degree of consolidation of the soft foundation improved by DM columns has not been well investigated. A three-dimensional mechanically and hydraulically-coupled numerical method was adopted in this study to investigate the degree of consolidation of the DM column foundation considering column yielding. A unit cell model was used, in which the soil was modeled as a linearly elastic material. For a comparison purpose, the DM column was modeled as an elastic or elastic-plastic material. This study examined the aspects of stress transfer, settlement, and degree of consolidation of the foundations without or with the consideration of the yielding of the DM column. A parametric study was conducted to investigate the influence of the column yielding on the stress concentration ratio, settlement, and average degree of consolidation of the DM column foundation. The stress concentration ratio increased and then decreased to reach a constant value with the increase of the column modulus and time. A simplified method was proposed to calculate the maximum stress concentration ratios under undrained and drained conditions considering the column yielding. The simplified method based on a composite foundation concept could conservatively estimate the consolidation settlement. An increase of the column modulus, area replacement ratio, and/or column permeability increased the rate of consolidation.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.12
• /
• pp.987-997
• /
• 2019

Walk score, walkablity index of built environmental condition, has developed and used in everyday life in United States. The purpose of this study is to produce walk score in Seoul, and to develop computer-based walk score system for improving it's usage. This study covers city of Seoul, and the unit of spatial analysis is 100m × 100m grid cell. This study uses same methodology with walk score in US, the Geographic Information Systems(GIS) is used for calculating the values of walk score(N=58,062). This study implemented Java-based system that utilizes walk score dataset(latitude, longitude, and walk score). This system provided search functions including both lat/long-based and address-based options. Meanwhile, this system was designed to provide the closest value of walk score in dataset if location did not match the certain points in dataset. This study has significance to provide walk score system being easily available to all.

• Animal Bioscience
• /
• v.34 no.6
• /
• pp.985-992
• /
• 2021

Objective: Artificial insemination plays an important role in genetic improvement in the goat farming system. The aim of this study was to investigate the effect of cervical application of hyaluronan (HA) on the fertility in goats after cervical artificial insemination using frozen-thawed (F-T) semen. Methods: After oestrous synchronisation with progesterone sponges and pregnant mare serum gonadotropin injection, both nulli- and multi-parous goats, were randomly allocated to 2 groups, and were inseminated with 0.25 mL of F-T semen (150×106 spermatozoa) twice at 52 h and 56 h after sponge removal. Prior to the insemination, goats in Group 1 only were given topical cervical HA application at 48 h after sponge removal. Site of insemination was recorded as os-cervix or intra-cervix or intra-uterus. Pregnancy was tested ultrasonographically 42 days after insemination. The data on pregnancy rates and percentage of animals according to the site of semen deposition were compared by Chi-square analysis. Results: The overall pregnancy rate was significantly (p<0.004) higher in goats with prior application to the cervix with HA (63.3%) than without (36.0%). Same pattern was observed in the pregnancy rates of nulli- and multi-parous goats in both the groups. Percentage of nulliparous goats according to the site of insemination in the HA group did not differ between first and the second insemination. However, in multiparous goats the percentage of animals inseminated intra-cervically was significantly increased (p≤0.05) between the first and the second inseminations. Conclusion: The results suggest that significantly higher fertility rate in the "HA goats" compared to the "without HA" group was because of deeper insemination facilitated by topical cervical application of HA. The deeper insemination into the cervical canal increase the rate of fertilisation when the cervical artificial insemination is performed.

• Journal of Technologic Dentistry
• /
• v.42 no.4
• /
• pp.355-361
• /
• 2020

Purpose: In this study, we added two kinds of photoinitiators (CQ and TPO) to prepare two kinds of denture base resins (Bis-GMA series and UDMA series) for three-dimensional (3D) printing to compare and analyze their mechanical and biological properties and to find the optimal composition. Methods: Control specimens were made using the mold made of polyvinyl siloxane of the same size. Light curing was performed twice for 20 seconds on both the upper and lower surfaces with LED (light emitting diode) light-curing unit (n=10). Experimental 3D printing dental resins were prepared, to which two photoinitiators were added. Digital light processing type 3D printer (EMBER, Autodesk, CA, USA) was used for 3D printing. The specimen size was 64 mm×10 mm×3.3 mm according to ISO 20795-1. The final specimens were tested for flexural strength and flexural modulus, and MTT test was performed. Furthermore, one-way analysis of variance was performed, and the post-test was analyzed by Duncan's test at α=0.05. Results: The flexural strength of both Bis-GMA+CQ (97.12±6.47 MPa) and UDMA+TPO (97.40±3.75 MPa) was significantly higher (p<0.05) in the experimental group. The flexural modulus in the experimental group of UDMA+TPO (2.56±0.06 GPa) was the highest (p<0.05). MTT test revealed that all the experimental groups showed more than 70% cell activity. Conclusion: The composition of UDMA+TPO showed excellent results in flexural strength, flexural modulus, and biocompatibility.