• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.5
• /
• pp.557-560
• /
• 2010

We have designed a digital variable-focal-length liquid lens by using 4-bit actuators. Each bit actuator consists of 1, 2, 4, and 8 unit actuators, squeezes discrete fluidic volume of $2^4$ different levels into the lens The 4-bit digital actuation mode ($b_4b_3b_2b_1$) affords $2_4$ different lens curvatures and focal lengths. The on/off control of the bit actuators helps in solving the main problem associated with analog liquid lenses, i.e., precise control of the pressure or volume of the fluid for changing the lens curvature and focal length. Experimentally, it has been found that the 4-bit actuators allow 0.074 nl (${\pm}0.02\;nl$) of the given fluid per bit to enter the lens and help in increasing the focal length from 3.63 mm to 38.6 mm in $2^4$ different levels; no high-cost controllers are required for precise control of the pressure or volume in this case. Therefore, the present digital liquid lens is more suitable to integrated optical systems by reducing additional component for pressure and volume control.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.3
• /
• pp.282-290
• /
• 2013

In this study, the adjustment range of mixture factor with replacement mineral admixture was reviewed to secure the mixture change data of high volume concrete compared to general concrete. When changing the concrete mix to high volume concrete within the universal concrete mixing, the adjustment range of mixture to ensure optimum quality is as follows. Unit-water content is $20{\sim}30kg/m^3$ downward. Fine aggregate ratio dropped by approximately 1% when W/B was reduced by 5%, and it is reduced by approximately 0.12% when there is a 5% increase in the total replacement rate. When the FA replacement rate was increased by 5%, the AE agent was approximately 20% to 30% higher compared with the conventional one. When the FA and BS replacement rate rose by 5%, W/B was reduced by about 1 to 4%.

• Horticultural Science & Technology
• /
• v.35 no.4
• /
• pp.439-445
• /
• 2017

Transplant production in a plant factory with artificial lighting provides several benefits; (1) rapid and uniform transplant production, (2) high production rate per unit area, and (3) production of disease free transplants production. To improve the growth of runner plants when strawberry transplants are produced in a plant factory, we conducted two experiments to investigate (1) the effect of different light intensity for stock and runner plants on the growth of runner plants, and (2) the effect of different container volume for runner plants on their growth. When the stock and runner plants were grown under nine different light conditions composed of three different light intensities (100, 200, and $400{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPF) for each stock and runner plants, increasing the light intensity for stock plants promoted the growth of runner plants, however, the growth of runner plants was not enhanced by increasing the light intensity for runner plants under same light intensity condition for stock plants. We also cultivated runner plants using plug trays with four different container volumes (21, 34, 73, and 150 mL) for 20 days after placing the stock plants, and found that using plug trays with lager container volume did not enhance the growth of runner plants. These results indicate that providing optimal condition for stock plants, rather than the runner plants, is more important for increasing the growth of the runner plants and that the efficiency of strawberry transplant production in a plant factory can be improved by decreasing light intensity or container volume for runner plants.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1219-1223
• /
• 2005

This study was accomplished to confirm the possibility of supplying stream minimum flow from detention storage which was determined to reduce peak flows of flood within developing planned district. The results analyzed was summarized as follows; Firstly, Sin-gil district situated in Ansan city was selected, of which watershed area has $0.56km^2$. And detention storage was determined to $5,370m^3$ from analyzing flood volume by the SCS unit hydrograph method. Secondly, using Visual Basic ver 6.0, a detention storage water balance model was developed, in which simulation was based on conditioning storage inflow and outflow according to streamflow volume or rate state. And streamflow was simulated using the DAWAST model. Thirdly, detention operation scenarios were consisted of the combinations with inflow referencing streamflow of 5mm/day, 10mm/day and outflow referencing streamflow of 1mm/day, 2mm/day. The developed detention storage water balance model was operated to simulate daily water storages of detention sized on flood by scenarios. Stream minimum flows were able to be supplied during 209 days to 237 days per a year, total volume of stream minimum flows supplied for this period was analyzed to reach 27 to $55\% of yearly streamflow volume. If inflow criteria of streamflows to detention was considered to be established on a theoretical condition, it is expected to supply stream minimum flows of 20 to $30\% of yearly streamflow from stream to detention. Also to maximize function of supplying urban stream minimum flow from detention storages, sewage waters within developing planned district have to be treated and entered to detention inflow together with streamflows to enrich function of detention planned to reduce flood volumes.

• Applied Biological Chemistry
• /
• v.33 no.1
• /
• pp.34-38
• /
• 1990

The molecular structural properties of amylopectins of Chunmabyeo(Japonica), Yongmunbyeo($Indica{\times}Japonica$) and Mahatma(Indica) rice were investigated. The intrinsic viscosity of Chunmabyeo, Yongmunbyeo and Mahatma amylopectin were 148.3 ml/g, 156.6 ml/g and 167.5 ml/g, and ${\beta}-amylolysis$ limit(%) were 54.6, 55.4 and 52.9 respectively. Average unit chain length(${\overline{CL}}$) and average inner chain length(${\overline{ICL}}$) of Mahatma amylopectin were longer than other varieties. Elution profiles by Sephadex G-50 chromatography of debranched amylopectins with ${\beta}-amylase$ showed two peaks (void volume, ${\overline{DP}}$3) and the elution profiles of debranched amylopectins with pullulanase showed three peaks(void volume, ${\overline{DP}}$35-45, ${\overline{DP}}$10-20). The ratio of Peak III(${\overline{DP}}$10-20) to Peak II (${\overline{DP}}$ 35-45) of Chunmbyeo, Yongmunbyeo and Mahatma amylopectin were 3.9, 3.4 and 3.3, respectively.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.8
• /
• pp.4025-4030
• /
• 2016

Background: Correlation between colorectal cancer (CRC) and abdominal obesity has been established, but there is a paucity of data on non-obese CRC patients. The aim of this study was to establish the characteristics of CRCs that occur in such patients. Materials and Methods: Consecutive CRC patients without cachexia were included. Unintended body weight loss, T4- or M1-staged CRCs, extensive lymph node involvement, or synchronous malignancy were classified as cachectic conditions. Abdominal fat volumes were measured using a multidetector CT unit with a software (Rapidia, INFINITT, Seoul, Korea). Results: Of the newly-diagnosed CRC patients, 258 non-cachectic and 88 cachectic patients were analyzed. The cancer size (p<0.001) and T stage (p<0.001) were inversely correlated with body mass index (BMI), visceral fat and subcutaneous fat volumes. Cancer size was the only independent factor related to BMI (p=0.016), visceral fat volume (p=0.002), and subcutaneous fat volume (p=0.027). In non-cachectic patients, a significant inverse correlation was found only between the cancer size and visceral fat volume (p=0.017). Conclusions: Non-obese CRC patients tend to have larger CRC lesions than their obese counterparts even under non-cachectic conditions. Such an inverse correlation between cancer size and visceral fat volume suggests that considerable CRCs are not correlated with abdominal obesity.

• Journal of Korea Port Economic Association
• /
• v.23 no.4
• /
• pp.159-175
• /
• 2007

The purpose of this study is to examine the causal relationship between trading volume of freight and industrial growth in Korea ports, and to induce policy implications. In order to test whether time series data is stationary and the model is fitness or not, we put in operation unit root test, cointegration test. And we apply Granger causality based on an error correction model, Hsiao(1981) method and variance decomposition. The results indicate that the extent of causality between trading volume of freight and industrial growth is strong in order of Incheon port, Busan port, Gwang Yang port, Ulsan port. We can infer policy suggestions as follows; The port policy of government must be focused on re-adjusting investment among Korea ports and raising competitive power of Korea ports

• Imaging Science in Dentistry
• /
• v.46 no.1
• /
• pp.9-16
• /
• 2016

Purpose: To evaluate the upper airway dimensions of obstructive sleep apnea (OSA) and control subjects using a cone-beam computed tomography (CBCT) unit commonly applied in clinical practice in order to assess airway dimensions in the same fashion as that routinely employed in a clinical setting. Materials and Methods: This was a retrospective analysis utilizing existing CBCT scans to evaluate the dimensions of the upper airway in OSA and control subjects. The CBCT data of sixteen OSA and sixteen control subjects were compared. The average area, average volume, total volume, and total length of the upper airway were computed. Width and anterior-posterior (AP) measurements were obtained on the smallest axial slice. Results: OSA subjects had a significantly smaller average airway area, average airway volume, total airway volume, and mean airway width. OSA subjects had a significantly larger airway length measurement. The mean A-P distance was not significantly different between groups. Conclusion: OSA subjects have a smaller upper airway compared to controls with the exception of airway length. The lack of a significant difference in the mean A-P distance may indicate that patient position during imaging (upright vs. supine) can affect this measurement. Comparison of this study with a future prospective study design will allow for validation of these results.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.7
• /
• pp.1066-1071
• /
• 2017

Recently high voltage impulse (HVI) technique has been extensively studied for desalting processes to control the $CaCO_3$ scale formation in industrial water practices such as power plant, boiler, and heat exchange operations. Investigation of the operational parameters for the HVI is important, however, those had not been reported yet. In this study, the effect of initial feed volume and contact time on reduction of calcium ion concentration by the HVI technique was investigated. Initial feed volumes of artificial hard water which contained 100 mg/L of $Ca^{2+}$, were set to 1, 2, and 3 L respectively. After 24hr of HVI contact with 12kV, $Ca^{2+}$ ion was reduced to 50, 29 and 19 % of their initial concentration, indicating that calcium removal increased as initial feed volume decreased. This implies the applied HVI pulse energy per unit mass of calcium is important parameter determining overall desalting efficiency. A series of extended operations of HVI up to 30 days verified the long term stability of the HVI system. The calcium ion declined to 40 mg/L after 2~3 days, and further reduction of calcium was not achieved, indicating that optimum operation time could be 2~3 days under these experimental conditions. Consequently, it was confirmed that the important operational parameter of HVI technique is initial feed volume and contact time as well as the applied voltage that was already proven in the previous study.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.1
• /
• pp.49-59
• /
• 2019

In this study, the durability of conical pick cutter was compared and analyzed by pre- and post-test visual inspection, measurement of weight loss and wear volume through field test on two types of conical pick cutters applied to rotary drum cutter. In the visual inspection, it was found that only 9 inserts were lost in the slim type conical pick cutter. This result show that the thickness of the head cover surrounding a insert was important to maintain the insert during excavation. The weight loss and wear volume of the heavy type conical pick cutter were less than half that of the slim type. From these results, it can be confirmed that heavy type is more useful than slim type in hard rock. It should be noted that, when determining the wear loss of the conical pick cutter, the mutual comparison of the weight measurement and the wear volume measurement results may be different due to the unit weight of the material and the spalling caused by excavation.