• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.125-128
• /
• 2001

In this paper, we propose a low power Scan-based Built-ln Self Test based on circuit partitioning and pattern suppression using modified test control unit. To partition a CUT(Circuit Under Testing), the MHPA(Multilevel Hypergraph Partition Algorithm) is used. As a result of circuit partition, we can reduce the total length of test pattern, so that power consumptions are decreased in test mode. Also, proposed Scan-based BIST architecture suppresses a redundant test pattern by inserting an additional decoder in BIST control unit. A decoder detects test pattern with high fault coverage, and applies it to partitioned circuits. Experimental result on the ISCAS benchmark circuits shows the efficiency of proposed low power BIST architecture.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권2호
• /
• pp.222-235
• /
• 2017

In this study, finite element modeling was used to predict the material properties of tri-axially braided textile composite. The model was made based on an experimental test specimen which was also used to compare the final results. The full interlacing of tows was geometrically modelled, from which repeating parts that make up the whole braid called unit cells were identified based on the geometric and mechanical property periodicity. In order to simulate the repeating nature of the unit cell, periodic boundary conditions were applied. For validation of the method, a reference model was analyzed for which a very good agreement was obtained. Material property calculation was done by simulating uniaxial and pure shear tests on the unit cell. The comparison of these results with that of experimental test results showed an excellent agreement. Finally, parametric study on the effect of number of plies, stacking type (symmetric/anti-symmetric) and stacking phase shift was conducted.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1167-1174
• /
• 2005

This paper describes on the volume change of Sewage Dredged Soils by using laboratory test and volumetric change test. The tremendous change of Moisture Content occured in the Sewage Dredged Soils during the Elapsed Time. The Unit Weight increases during the normally shrinkage limit void ratio and then the unit weight decrease. A volume of Sewage Dredged Soils according to the moisture content is a difference maximum 2.5 times. And there is the difference 3.5 times according to the change of unit weight. Therefore, the moisture content and unit weight computation are very important for the computation on the volume of Sewage Drdeged Soils.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1046-1050
• /
• 2003

In this paper, we describe study on the development or multi-path ultrasonic gas flowmeter using a transit time method. This system includes 5 pairs of ultrasonic transducers. ultrasonic signal processing unit using switch matrix method, computation algorithm of gas flow rate, spool piece type multi-path pipe unit. We have developed enhanced type of main ultrasonic signal processing unit using switch matrix method fer multi-path ultrasonic gas flowmeter. Also, we have developed the new transmitting ＆ receiving method of ultrasonic waves and the new signal processing algorithm for the computation of ultrasonic transit time from received ultrasonic waves. In this study, we have designed more compact signal processing unit compared with the conventional hardware system of multi-path ultrasonic gas flowmeter. We have confirmed its reliability for multi-path ultrasonic gas flowmeter through the laboratory test using calibration system. In the future. we will perform the field test for the developed system in the POSCO gas line.

• 한국기계가공학회지
• /
• 제18권6호
• /
• pp.62-68
• /
• 2019

In this paper, we describe the design and manufacture of a control system for an automatic loading system that inserts and removes workpieces after machining. The control system was manufactured using DSP for high speed and consists of a power unit, a control unit, a communication unit, and a display unit. We connected the control system to the mechanical system of the automatic workpiece loader to test the characteristics, which allowed us to raise and lower the automatic workpiece loading system to the desired position. The successful test demonstrates that we can use the control system to control the workpiece automatic loading system.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제8권7호
• /
• pp.289-302
• /
• 2019

시계열의 구조 변화란, 전체 시계열 자료를 구성하는 기간에서 관측치들의 분포가 상대적으로 안정적이다가, 특정 시점에서 분포 특성의 급격한 변화를 보이는 것을 의미한다. 비정상(non-stationary) 장기 시계열 안에서도, 단기적인 추세의 변화가 일시적인 것인지, 아니면 구조적으로 변한 것인지를 적시에 판단하는 것은 중요하다. 이는 시계열 추세의 변화를 상시 감지하여, 변화에 맞는 적정한 대응을 할 필요가 있기 때문이다. 본 연구에서는 단위근 검정법을 기반으로 한 검정 결과를 시각화함으로써, 의사결정자가 시계열의 구조 변화를 손쉽게 파악할 수 있는 방안을 제시하였다. 특히 시계열을 분할한 후 검정하는 방법을 통해, 장기 시계열일 때에도 단기 구조 변화를 파악할 수 있도록 하였다.

• 한국항행학회논문지
• /
• 제10권2호
• /
• pp.173-180
• /
• 2006

비행체 탑재 레이다는 기상에 관계없이 전천후로 비행체의 안전항행, 임무감시, 사격통제, 충돌회피, 이착륙 등 비행에 필수적인 항공장치이다. 본 논문에서는 비행체 탑재 다중 모드 펄스 도플러 레이다 시험 모델의 설계, 제작 및 비행시험 결과를 제시한다. 레이다 시스템은 안테나부, 송수신부, 신호처리부와 전시부의 4-LRU(Line Replacement Unit)로 구성되며, 개발기술은 평판 슬롯 배열 안테나, TWTA 송신기, coherent I/Q detector, 디지털 펄스 압축, 도플러 FFT 필터를 기반으로 한 DSP, 적응 CFAR, TWS 추적 처리기, 비행정보 IMU 및 도플러 추정보상 기법을 포함한다. 개발된 레이다 시스템의 설계 성능은 다양한 헬기탑재 비행시험을 통하여 기능 및 성능을 확인하였다.

• 중환자간호학회지
• /
• 제15권3호
• /
• pp.88-100
• /
• 2022

Purpose : This study aimed to identify risk factors for unplanned reintubation after planned extubation and to analyze the clinical outcomes in patients admitted to the intensive care unit after cardiac surgery. Methods : The study examined patients who underwent intubation and planned extubation admitted to the intensive care unit after cardiac surgery between January 1, 2017, and December 31, 2021. The reintubation group comprised 58 patients underwent unplanned reintubation within 7 days of planned extubation. The maintenance group comprised 116 patients who did not undergo reintubation and were matched with the reintubation group using the rational for matching criteria. Data were collected retrospectively from electronic medical records. We used the independent t-test, Mann-Whitney U test, 𝑥²-test, Fisher's exact test, and logistic regression analysis with SPSS/WIN 27.0. Results : The multivariate logistic regression analysis demonstrated that albumin (odds ratio [OR]=0.38, 95% confidence interval [CI]=0.20-0.72), surgery time (OR=1.54, 95% CI=1.20-1.97), PaO₂ before extubation (OR=0.85 per 10 mmHg, 95% CI=0.75-0.97), postoperative arrhythmia (OR=2.82, 95% CI=1.22-6.51), reoperation due to bleeding (OR=4.65, 95% CI=1.27-17.07), and postoperative acute renal failure (OR=2.97, 95% CI=1.09-8.04) were risk factors for unplanned reintubation. The reintubation group had a higher in-hospital mortality rate (𝑥²=33.74, p<.001), longer intensive care unit stay (Z=-7.81, p<.001), and longer hospital stay than the maintenance group (Z=-8.29, p<.001). Conclusion : These results identified risk factors and clinical outcomes of unplanned reintubation after planned extubation after cardiac surgery. These findings should be considered when developing and managing an intervention program to prevent and reduce the incidence of unplanned reintubation.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.260-265
• /
• 2003

Recently there are operating the Floating Vessel with the positioning control unit in ocean. This technology is not open to industrial society as exclusive one. In order to improve technical competition for its domestic product. It is required to develope the relevant product like above subject. This system consist of DGPS System, Unique Analysis, System Network, and Mooring System and so on. Accordingly Model/Field test were carried out to verify its Function / Performance for application of practical product. In this development, we have prepared the successful result to operate the speedy / accurate / stable unit as shown on this subject 'Development of Positioning Control System for Ship and Offshore using the DGPS'. And also it is expected to install this product for ship and offshore unit.

• 수산경영론집
• /
• 제48권1호
• /
• pp.51-71
• /
• 2017

We explore each of the three major domestic fishery product markets in South Korea- Frozen Squid, Frozen Hair tail and Dried Anchovy- to assess whether we can find evidence for Law of One Price (LOP) across the five major cities- Seoul, Dae-Jeon, Dae-Gu, Gwang-Ju and Busan. To achieve our aim, we utilize two different types of unit root tests: Augmented Dickey-Fuller (ADF) and Kwiatkowski-Phillips-Schmidt-Shin (KPSS) unit root test. In each of the three fishery product markets, we find evidence in support of LOP among several cities, which confirms that these markets are integrated to a certain extent. In particular, we find stronger evidence of LOP for Dried Anchovy market relative to the other two fishery product markets. Based on our findings, we argue that the Dried Anchovy market exhibits a greater degree of market integration across the five major cities in South Korea compared to the other two fishery product markets. The greater degree of market integration in the Dry Anchovy market is facilitated by its higher substitutability across cities; taken together these findings show that the market for Dried Anchovy in South Korea is more efficient than the markets for Frozen Squid and Frozen Hair tail.