• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.860-863
• /
• 2003

In this paper high power SMU(Source Measurement Unit) having 50V/1.5A source/measure range has been designed and implemented. The SMU has two operation mode, voltage mode and current mode. The SMU can be used as variable voltage source, variable current source, voltage meter, or current meter. Combining two different unit, output power can be doubled as 100V/1.5A. The developed SMU tan be used many semiconductor testing system and electronic device inspecting system.

• 한국소음진동공학회논문집
• /
• 제21권6호
• /
• pp.499-505
• /
• 2011

This paper presents optimal design of controllable magnetorheological suspension unit for a tracked vehicle. As a first step, a double-rod type MR suspension unit is designed on the basis of the Bingham model of commercially available MR fluid, and its damping characteristics are evaluated with respect to the intensity of the magnetic field. Subsequently, the governing equation of motion of the MR suspension system featuring the MR valve is established. Then, the optimization problem to find optimal geometric dimensions of the MR supension unit is formulated by considering an objective function which is related to damping torque and control energy. The first order optimization method intergrated with a commercial finite element method(FEM) software is adopted to obtain optimal solution of the system. The performance characteristics of the optimized MR susepnsion unit is then evaluated and compared with initial one.

• 설비공학논문집
• /
• 제28권1호
• /
• pp.29-34
• /
• 2016

The friction factor unit was studied to find a more economic alternative compared to the conventional 30 mmAq/m. The pipe and pump for cooling water piping used in a failing were selected, and the friction factor unit was changed to calculate the pipe diameter and the brake shaft power. Based on current electric charges, After the brake shaft power was converted into operational costs based on current electric charges, then an economic analysis was conducted considering that incorporated the initial installation costs and operational costs for the pump. We found that the friction factor unit when using 20 mmAq/m is more economical than that with 30 mmAq/m, if the piping is used for more than 4 years. The small friction factor unit is desirable when the piping is used for quite a long period of time, and the selection of a more economic friction factor unit should considering the period of usage will be important.

• 전기의세계
• /
• 제29권7호
• /
• pp.460-470
• /
• 1980

The design of a control unit for a playback-type industrial robot is studied. Implemented for the cylindrical-coordinate type industrial robot with 5 degrees of freedom, the control unit constructed for the study consists of (i) z-80 .mu.p-based .mu.-computer control system (ii) Teach-Box for work command, and (iii) various softwares for generating signals for servo driving unit and operating the robot as playback-type. Softwares are developed by using high level Basic Language and low level z-80 Assembly Language for ease of programming and speed of program execution. To show the effectiveness, and example is included.

• 전기학회논문지P
• /
• 제55권4호
• /
• pp.161-166
• /
• 2006

In this paper, an automatic lighting control system is developed using microprocessor. The developed system consists of a digital lighting control unit, an analog lighting control unit, and a lighting control simulator. In the developed system, ATMega128 is used as the main controller. The developed digital lighting control unit consists of eight modules and the developed analog lighting control unit consists of six modules respectively. Additional, the developed simulator consists of a digital and an analog lighting control simulation using graphic user interface. And so this developed system can be applied to the controller design of the interior and exterior lighting equipment.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1996년도 Advance Program of 13th optics andquantum Electronics conference, 1996제13 회 광학 및 양자전자 학술 발표회 논문 요약집
• /
• pp.23-23
• /
• 1996

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1365-1381
• /
• 2023

In this paper, a procedure for evaluating the structural integrity of the PCSG (Printed Circuit Steam Generator) unit block is presented with a simplified FE (finite element) analysis technique by applying the homogenization method. The homogenization method converts an inhomogeneous elastic body into a homogeneous elastic body with same mechanical behaviour. This method is effective when the inhomogeneous elastic body has repetitive microstructures, and thus the method was applied to the sheet assembly among the PCSG unit block components. From the method, the homogenized equivalent elastic constants of the sheet assembly were derived. The validity of the determined material properties was verified by comparing the mechanical behaviour with the reference model. Thermo-mechanical analysis was then performed to evaluate the structural integrity of the PCSG unit block, and it was found that the contact region between the steam header and the sheet assembly is a critical point where large bending stress occurs due to the temperature difference.

• 대한가정학회지
• /
• 제49권8호
• /
• pp.113-124
• /
• 2011

The aim of this study is to conduct an evaluation review of the contents of the career education unit in textbooks on technology and home economics for senior high school freshmen. This study adopted the "Objective & System of Career Education" established by the Korea Research Institute for Vocational Education & Training as the criterion for evaluating the content of career education, and targeted the unit, "Design of Vocation & Careers", which was included in six different textbooks on technology and home economics for senior high school freshmen involving five different publishers. The unit of "Design of Vocation & Careers" was mostly written in three subunits. An analysis of the textbooks by different, publisher showed that every aspect of the "Objective & System of Career Education" was appropriately covered in the unit. This was achieved by means of the elements of contents and illustrations.

• Journal of Biosystems Engineering
• /
• 제23권1호
• /
• pp.83-90
• /
• 1998

In this paper the automatic system for dairy cattle has been desisted such as body temperature measuring unit, feed supplying unit and temperature control unit. Since e disease is strongly related to the body temperature of cattle, early detection of the abnormal temperature would prevent the severe problems which nay occur in dairy farms. An electronic component AD590J is used as temperature sensor for the system, The device is highly robust against the noise since the output signal is the current so it can be applied to a long distance sensing The resolution of signal is 0.1$^{\circ}C$ and the current is 10㎷ Also 12-bit A/D converter is desisted fir interfacing the sensor with a one-chip microprocessor. A temperature measuring experiment using the developed system has been done for measuring the temperature of human beings and the system was proven to be useful for measuring the body temperature of dairy cattle properly. A geared AC motor is used for the feed supplying unit The heater and fm are used as temperature control unit. The feed supplying unit and temperature control unit are well operating in the laboratory experiment.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.952-965
• /
• 1993

A simulation modeling is necessary for the optimal design of a rice processing plant, which consists of a facility (a silo system) of rice drying and storage and a rice mill plant. In a rice processing plant, the production scheduling and the decision on capcity of each unit based on a queuing theory is very important and difficult. In this study a process-oriented simulation model was developed for the design of a rice drying and storage system with SLAMSYSTEM. The simulation model is capable of simulating virtually all the processing activities and provides work schedules which minimize total processing time , mean flow time and bottleneck of the plant system and estimate drying time for a batch in a drying silo. Model results were used for determination the size and capacity of each processing unit and for analyzing the performance of the plant . The developed model was actually applied to construct a grain silo system for rice drying and storage.