• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.185-194
• /
• 2000

Rapid Prototyping(RP) techniques have their unique characteristics according to the working principles: stair-stepped surface of parts due to layer-by-layer stacking, low build speed caused by line-by-line solidification to build one layer, and additional post processing to improve surface roughness, so it is required very high cost to introduce and to maintain of RP apparatus. The objective of this study is to develop a new RP process, Variable Lamination Manufacturing using linear hotwire cutting technique and expandable polystyrene foam sheet as part material(VLM-S), and to investigate characteristics of part material, cutting characteristics by using linear hotwire cutting system and bonding. Experiments were carried out to investigate mechanical properties of part material such as anisotropy and directional tensile strength. In order to obtain optimal dimensional accuracy, surface roughness, and reduced cutting time, addition experiments were performed to find the relationship between cutting speed and cutting offset of hotwire, and heat generation of hotwire per unit length. So, adhesion strength tests according to ASTM test procedure showed that delamination did not occur at bonded area. Based on the data, a clover-shape was fabricated using unit shape part(USP) it is generated hotwire cutting. The results of present study have been reflected on the enhancement of the VLM-S process and apparatus.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.349-352
• /
• 2003

A personal low-frequency stimulator is a portable device to relax muscle pains of a person. The stimulator generates combined low-frequency pulses to be applied to pads attached to painful muscles. This paper reports a development of such device with its characteristic analyses. The major components of our stimulator are MCU, high-voltage generating circuit part, high-voltage switching circuit part, input switch part and display unit. High-voltage generating circuit is designed by using a boost converter circuit and allows user control of the output voltage. High-voltage switching circuit, controlled by MCU, generates output voltage to be applied to pads. Input switch part is composed of power supply, intensity selection, mode selection and memory. Display unit adopts a text LCD module to display modes, Intensity, output frequency and user set-up time. Our designed safety circuit, to protect human body from possible electric shock, slowly increases the output voltage to the selected output intensity. It continuously checks the output pulse shape and disable the output when dangerous pulses are detected. This paper also shows some experimental results.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제12권3호
• /
• pp.201-213
• /
• 2008

The main purpose of this study is to explore the relationship between the 'logical reasoning skill' and performance in the logic unit that is part of the grade 9 syllabus in mathematics in Turkey. After the teaching of the logic unit, an achievement test, a general skills test and the test of logical reasoning were administered to the 80, 9th year high school students. Pearson Moments Correlation coefficient was used for the analysis of the data to determine the relations between the variables. In addition to that to obtain the most suitable regression explaining the students' performances in the logic unit, stepwise multiple regressions analysis was used. At the end of the study, statistically significant relations were found between the students' performance in the logic unit and their logical reasoning skills, their results of the shape recognition test from the general skills battery and their overall performance in the mathematics lesson.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권6호
• /
• pp.530-536
• /
• 2016

The number of fabrication shop for spherical type LNG tank is proportional to that of the tank radius to be constructed. Due to limitation of facility investment including building sites, it is practically difficult to fabricate various size tanks with perfectly spherical shape in the yards. The efficient method to be capable of increasing cargo tank volume is to extend vertically the conventional spherical type LNG tank by inserting a cylindrical shell structure. The main purpose of this study is to derive related equations on forces generated on spherical type LNG tank with central cylindrical part under various static loadings in order to establish the simplified analysis method for the initial estimate. In this study, equations on circumferential and meridional force have been derived and verified by relations with the reaction forces per unit length of equator.

• 한국지반공학회논문집
• /
• 제35권12호
• /
• pp.7-13
• /
• 2019

현장타설말뚝인 경우에 연암 소켓부의 단위주면마찰응력을 산정하는 방법 중 벽면 거칠기에 의한 산정 방법이 있다. 이 방법은 현장타설말뚝을 시공하기 위한 굴착 단계에서 거칠기 측정 장치를 굴착공에 설치하여 암반 벽면의 거칠기 양상을 측정하여 주면마찰력을 산정하는 것이다. 본 연구에서는 현장타설말뚝의 암반 소켓부 벽면의 거칠기 양상을 천공홀에서 직접 측정하였으며 그 결과를 이용하여 암반의 주면마찰력 특성을 파악하고자 한다. 그리고, 거칠기 시험 결과를 검증하기 위하여 동일 말뚝에 정재하시험 및 하중전이시험을 수행하였다.

• 한국실내디자인학회논문집
• /
• 제19권6호
• /
• pp.47-58
• /
• 2010

Frank Lloyd Wright(1867-1959) was regarded as the pioneer of the modern architecture in the beginning and transition period of 20th century. His works have the pure shape form which have the deep relationship with the organic architecture. Wright told himself that the Froebel System had an influence on his works a lot. This study have researched about the three dimensional application of the Froebel System in his works with assembling and disassembling. Also the two dimensional application in the diagonal and circular plans are the one of the subjects here. The following conclusions are reached. First, The similar of the Wright's works and the Froebel System was the application of the similar principles rather than the copy of the method, which are the accent of the center, the composition of the part and whole, the understanding of the composition principle through the unit system and the unfolding of the crystal by rotation. Even thought the Wright's works have the triangle, square, hexagonal shape, the way of the expansion from the centered space was same. Also the space formed by the division of the center space, unfolds making the part and whole by overlap and continuation. The 2nd Froebel make space decided by the Net and Crystal Lattices which have the crystal characteristics by the rotation. The new geometric architecture, pinwheel, was created by this method. The application of the Froebel in the Wright's works have the several sets which are the 3th, 4th, 5th, 6th Froebels, 2nd, 7th Froebels and the 3th, 5th, 9th Froebels. The geometrical analysis of the square shape and the diagonal shape of the Wright's works was possible. The unfolding of the centered space can be found in the Guggenheim Museum using the analysis of the circular geometric of the 9th Froebel. The above study proves that the Froebel was not a mere tool for the basic shape training but also the main body of Wright's works which consists of the organic idea and philosophy of the space.

• 한국정밀공학회지
• /
• 제18권8호
• /
• pp.54-63
• /
• 2001

Rapid Prototyping(RP) techniques have their unique characteristics according to the working principles: stair-stepped surface of a part due to layer-by-layer stacking, low build speed caused by point-by-point or line-by-line solidification to build one layer, and additional posts processing to improve surface roughness, so high cost is required to introduce and to maintain the RP apparatus. The objective of this study is to develop a new RP process, Variable Lamination Manufacturing by using expandable polystyrene foam sheet as part material(VLM-S), and to design an apparatus for implementation of the process. So, the process parameters and design criterions of the apparatus were defined and the techniques were proposed to satisfy the design criterion. Based on the results, a knob-shape, pyramid shape. and a solid block were fabricated on the apparatus in which unit shape part(USP) was generated for building each layer.

• 한국주조공학회지
• /
• 제41권2호
• /
• pp.132-138
• /
• 2021

본 연구에서는 16t/h 저주파 유도 용해로에서 주철의 용해 시, 생압고철(Press Scrap)과 파쇄고철(Shredded Scrap)을 사용함에 따른 에너지 원단위(Power Basic Unit)를 비교하였다. 생압고철 대신 파쇄고철을 장입하면, 에너지 원단위가 약 5% 향상되는 것으로 확인되었다. 고철의 형상, 크기에 따른 에너지 측면 특징과 용해로 크기의 영향을 고찰하였다. 마지막으로 본 기술의 활용성을 제고하기 위한 전략을 제안하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.579-584
• /
• 1999

The purpose of the present paper are not to develope machine tools of new concepts and advanced mechanisms but to introduce and apply new methods and concepts in the design procedure by using and changing the previously existing technologies. In this paper 3D modeller was proposed for designing machine tools and the design and the better manufacturability checking than 2D one so that design error was dramatically reduced. As designer may easily understand the real shape of a part and assembly object, it's easy to draw the drawings not only in a conceptual design but also in a detailed design. Also, design automation software enabled designer to consider the real important design parameters by reducing time to spend in estimating and calculating the strength of the model by the computer aided automatic calculation instead of a tedious and complex calculation by manual method and help him to easily make the decision for selecting the stocks and design the structure of part or unit of machine tools.

• 방사성폐기물학회지
• /
• 제14권2호
• /
• pp.123-134
• /
• 2016

최근 국내에서는 월성 1호기 및 고리 1호기를 포함하여 운영 중인 원자력발전소가 노후화함에 따라 원전 해체에 대한 관심이 많이 증대되고 있다. 이와 관련하여 월성 1호기의 계속운전이 최근 결정되었으며, 고리 1호기의 경우 2017년 6월 영구정지하기로 결정되었다. 이에 본 논문에서는 상업용 원자로로서는 국내 최초로 해체가 예정된 고리 1호기에 대해, 원자로 압력용기 자체의 해체로 인해 발생하는 방사성폐기물 최종 처분량을 원자로 압력용기 절단 방법 및 방사성폐기물 처분용기를 고려하여 산정하였다. 처분용기를 고려한 방사성폐기물 처분량을 산정한 결과 원자로 압력용기 몸통 부위보다는 반구 형태의 헤드 부분을 작게 절단할수록 최종 처분량이 감소하는 것으로 예측되었다. 또한 경주 방폐장의 200 L 및 320 L 드럼 처분용 처분용기의 경우 무게 제한으로 인해 적재효율이 좋지 못한 것으로 나타났다.