• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.5
• /
• pp.269-277
• /
• 2018

NAND flash memory has widely been used because of non-volatility, low power consumption and fast access time. However, it suffers from inability to provide update-in-place and the erase cycle is limited. The unit of read/write operation is a page and the unit of erase operation is a block. Moreover erase operation is slower than other operations. We proposed the Adaptive Garbage Collection (called "AGC") policy which focuses on not only reducing garbage collection process time for real-time guarantee but also wear-leveling for a flash memory lifetime. The AGC performs better than Cost-benefit policy and Greedy policy. But the AGC does not consider the operation characteristics. So we proposed the Advanced Adaptive Garbage Collection (called "A-AGC") policy which considers the page write operation count and block erase operation count. The A-AGC reduces the write operations by considering the data update frequency and update data size. Also, it reduces the erase operations by considering the file fragmentation. We implemented the A-AGC policy and measured the performance compared with the AGC policy. Simulation results show that the A-AGC policy performs better than AGC, specially for append operation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.12
• /
• pp.80-86
• /
• 2003

Elliptic curve cryptosystem(ECC) offers the highest security per bit among the known publick key system. The benefit of smaller key size makes ECC particularly attractive for embedded applications since its implementation requires less memory and processing power. In this paper, we propose a new multiplier structure with configurable output sizes and operation cycles. The number of output bits can be freely chosen in the new architecture with the performance-area trade-off depending on the application. Using the architecture, a 193-bit normal basis multiplier and inversion unit are designed in GF(2$^{m}$ ). It is implemented using HDL and 0.35${\mu}{\textrm}{m}$ CMOS technology and the operation is verified by simulation.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.860-863
• /
• 2003

In this paper high power SMU(Source Measurement Unit) having 50V/1.5A source/measure range has been designed and implemented. The SMU has two operation mode, voltage mode and current mode. The SMU can be used as variable voltage source, variable current source, voltage meter, or current meter. Combining two different unit, output power can be doubled as 100V/1.5A. The developed SMU tan be used many semiconductor testing system and electronic device inspecting system.

• Journal of Navigation and Port Research
• /
• v.47 no.2
• /
• pp.85-92
• /
• 2023

The hardware of an LED lighting control system for coastal lighting at coastal pier entrance consists of a power supply unit, an AVR control unit, a CLCD output unit, an LED control unit, a scenario selection switch unit, and an operation speed display unit. It is made of an 8-channel. The CPU used ATmega128 and the FET was used to control the current signal. To operate the CPU, DC 12V was converted to DC 5V using a regulator 7805. A heat sink was used to remove heat generated in the FET. By connecting the load LED module to the manufactured 8-channel LED lighting control system, the operation was confirmed through various production scenarios. In addition, a control system was designed to show the most suitable color for the atmosphere of the coastal pier according to the input value of temperature and illumination using a fuzzy control system. Computer simulation was then conducted. Results confirmed that fuzzy control did not need to store many data inputs due to characteristics of artificial intelligence and that it could efficiently represent many output values with simple fuzzy rules.

• The Journal of Korean Physical Therapy
• /
• v.36 no.1
• /
• pp.27-32
• /
• 2024

Purpose: This study was conducted to verify the effect of applying a pressure biofeedback unit on walking ability and knee joint function while performing knee joint extensor strengthening exercises using resistance exercise equipment in total knee replacement (TKR) patients. Methods: This study was conducted on twelve patients receiving rehabilitation treatment after being admitted to a rehabilitation hospital post-TKR. Of these, six were allocated to a feedback group with a pressure biofeedback unit, and the other 6 were allocated to a control group without a pressure biofeedback unit. The subjects performed an exercise program for 45 minutes per session, five times a week, for two weeks. Walking ability and knee joint function were evaluated and analyzed before and after exercise. Results: The feedback group showed significantly better improvements in walking speed, gait cycle, step length on the non-operation side, time on the foot on the operation side, K-WOMAC stiffness, and K-WOMAC function than the control group (p<0.05). Conclusion: When strengthening the knee joint extensor muscles using resistance exercise equipment in TKR patients, the provision of a pressure biofeedback unit was found to improve walking ability and knee joint function by inducing concentric-eccentric contraction of the knee joint extensor muscles. Therefore, the study shows that exercise based on the provision of a pressure biofeedback unit should be considered when strengthening knee joint extensor muscles to improve the walking ability and knee joint function of TKR patients in clinical practice.

• The Korean Journal of Emergency Medical Services
• /
• v.8 no.1
• /
• pp.199-210
• /
• 2004

Since the 119 fire department was legally permitted to serve in Emergency Medical Service(EMS)Operation of emergency patients in 1983, 119 EMS operation in general has made a big progress in serving the needs for emergency patients. Currently EMS operation is carried out by 119 EMS unit, private ambulance Co.,etc. But due to the public recognition and volunteers, 119 EMS operation carries the major share of the service. This observation is not surprising in that such a trends occured in Japan 20 years ago. This paper compared the 119 EMS operation conducted by the fire department in Korea with that of Japan in order to draw some inferences from the comparison. The results of the study compared to Japan were as follows: 1. Japan was higher 1.5 times in the number of EMS units per population(100,000), 1.1 times in the number of patient transports per unit. 2. Japan was higher 4.54 times in the number of the 119 EMS personnel per population(100,000), 30.6 times in that per square killometers, 30.6 times per 119 EMS unit, in per ambulance 2.48times. 3. Japan was higher 1.83 times in the number of ambulance per population(100,000), 1.26 times in that per square killo meters. 4. Japan was higher 1.7 times in the number of transport patients per population (100,000), but Korea was higher 2.68 times in the transport patients per EMS personal. 5. Compared to Japan, there was no emergency care related to ALS, for example, such as administering dugs orally and intravenously, interpreting elctrocardiograms, performing endotracheal tube or LMA insertion, using monitors and other complex equipments in Korea.

• The Journal of Korean Society for Radiation Therapy
• /
• v.6 no.1
• /
• pp.21-30
• /
• 1994

To analyze the states of operation of radiotherapy facilities in the period from 1979 to 1992 and to get the base for efficient operation and maintenance of the radiotherapy facilities. Data on the records of annual number of patients operated by each facility; span of suspension of operation, the cost and span of repairing, and parts of oui-of-order in the period from 1979 to 1992 were analyzed. We made a comparative analysis of average annual number of patients, annual span of the suspension of operation, annual cost ratio of repair, span of repairing per break down, and total number of broken parts. We could get following annual number of patients(day), span of the suspension of span ($\%$)(day). annual cost ratio fo repair($\%$), span of repairing per break down(Min-Max, day), and number of broken parts from this analysis. 1. Cobalt unit (Picker C-9) : 10,389(43), 0.4(0.83) 0.07, 1hr-2, 3 2. Linac(Clinac 6/100) : 11,492(50), 4.0(9.57), 0.98, 1hr-30, 12 3. Linac(Clinac 18) : 9.115(44), 12.7(30.5), 3.54, 1hr-108. 41 4. Simulator(Picker Ther-X) : 2,017(9), 0.51(1.3), 0.24, 1hr-2, 7 5. RTP(Capentec Cap-plan) : 528(2), 0.4(0.93), - hrs, - The conclusion obtained from statistical analysis above are as follows. 1. The rate of operation of Cobalt unit($99.6\%$) was higher that of Linear Accelerators ($87.3\%$). The rates operation of Simulator and RTP computer were very close to that of Cobalt unit. 2. In order to raise up the working ratio of accelerator. it is desirable that we keep our engineer to learn a sufficient technical skill and the equipment agent to stock sufficient spare parts. 3. In order to maintain Linear Accelerator efficiently, it is desirable to have annually $2.3\%$ of the purchase price of equiment for repairing.

• Journal of Korean Society of Transportation
• /
• v.33 no.3
• /
• pp.237-246
• /
• 2015

Operation and Maintenance in road infrastructure is repetitive carbon emissions activities to preserve the road in its originally constructed condition. In the view of road planning and construction, operation, and maintenance of life cycle, operation and maintenance stage quantification of carbon emissions is very important because it is easily accessible activities to reduce carbon emissions in road infrastructure that existing and new road. However, carbon emissions estimation in operation and maintenance stage is yet to do, because data collection is so hard and carbon emissions estimation methodology is very complicated. In this study, a basic unit of carbon emission in the operation and maintenance stage of the road infrastructure was developed in order to get the quantitative determination of carbon that occurring. Carbon emissions of the Expressway and Common state road was calculated by using the basic unit of carbon emission and application plan of basic unit of carbon emission are presented.

• The Journal of Korean Physical Therapy
• /
• v.15 no.4
• /
• pp.151-179
• /
• 2003

The purpose of this study was to examine the influence of total knee replacement to arthritis patients in pain intensity and functional impairment. For this study, over 50-year-old 30 patients who had osteoarthritis and 69 patients who got total knee replacement at the one of the departments of orthopedics in Daegu were interviewed from June, 2002 to March, 2003. The results of this study were as follows : First, pain intensity was decreased to experimental group after operation than control group(P<.01) And the presence of crepitation was also decreased to them(P<.05). On the other hand there's no significant difference was noted in the presence of stiffness, degree of flexion contracture and extension contracture between two groups. Second, over 91 days group after operation and visitor's group of physiotherapy unit were better than others in Level of knee function(P<.01). Third, over 91 days group after operation and visitor's group of physiotherapy unit were higher than others in Barthel Index of knee function(P<.01). Forth, over 91 days group after operation and visitor's group of physiotherapy unit were higher than others in Level of IADL(P<.05). Fifth, over 91 days group after operation and visitor‘s group of physiotherapy unit were higher than others in Katz Index of knee function(P<.01). Sixth, although Old Ages' Activity Index seemed to get better as time goes by, there's no statistical difference. Seventh, over 91 days group after operation and visitor's group of physiotherapy unit were higher than admission group and under 30 days group after operation in Social Activity Index(P<.05). Eighth, the function of the knee was connected with the abilities in the activity of the old and the social skill. The Barthel index was connected with the function of the knee joint and the activities of the old and Katz index. IADL function was connected with the activities of the old and the social activity. The Katz index was connected with the Barthel index. The activity of the old was connected with the Barthel index, the functional score of the knee joint andthe IADL score. The ability of social skill was connected with the activity of the old, IADL score and the function of the knee.

• Electronics and Telecommunications Trends
• /
• v.32 no.6
• /
• pp.57-65
• /
• 2017

Neural network based AI computing is a promising technology that reflects the recognition and decision operation of human beings. Early AI computing processors were composed of GPUs and CPUs; however, the dramatic increment of a floating point operation requires an energy efficient AI processor with a highly parallelized architecture. In this paper, we analyze the trends in processor architectures for AI computing. Some architectures are still composed using GPUs. However, they reduce the size of each processing unit by allowing a half precision operation, and raise the processing unit density. Other architectures concentrate on matrix multiplication, and require the construction of dedicated hardware for a fast vector operation. Finally, we propose our own inAB processor architecture and introduce domestic cutting-edge processor design capabilities.