• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.149-149
• /
• 2018

Prediction on initial motion of sediment is crucial to evaluate sediment transport and channel stability. The condition of incipient movement of sediment is characterized by bed shear stress, which is generated from force of moving water against the bed of the channel, and by critical shear stress, which depends on force resisting motion of sediment due to the submerged weight of the grains. When the bed shear stress exceeds the critical shear stress, sediment particles begin rolling and sliding at isolated and random locations. In Mountain River, debris flow frequently occurs due to heavy rainfall and can lead some natural stones from mountain slope into the bed river. This phenomenon could add additional forces to sediment transport system in the bed of river and also affect or change direction and magnitude of sediment movement. In this paper, evaluations on incipient motion of uniform coarse gravel under falling spheres impacts using small scale flume channel were conducted. The drag force of falling spheres due to water flow and length movement of falling spheres were investigated. The experiments were carried out in flume channel made by glass wall and steel floor with 12 m long, 0.6 m wide, and 0.6 m deep. The bed slopes were selected with the range from 0.7% to 1.5%. The thickness of granular layer was at least 3 times of diameter of granular particle to meet grain placement condition. The sphere diameters were chosen to be 4cm, 6 cm, 8 cm, 10 cm. The spheres were fallen in to the bed channel for critical condition and under critical condition of motion particle. Based on the experimental results, the Shields curve of particles Reynold number and dimensionless critical shear stress were plotted. The relationship between with drag force and the length movement of spheres were plotted. The pathways of the bed material Under the impact of spheres falling were analyzed.

• Journal of Hydrogen and New Energy
• /
• v.17 no.1
• /
• pp.39-46
• /
• 2006

Highly ordered Li dispersed nickel oxide nanotubes were prepared with anodic aluminum oxide (AAO) template for hydrogen storage. Electron microscope results showed that uniform length and diameter of nickel oxide nanotubes were obtained. The wall thickness and outer diameter of nickel oxide nanotubes are about 40 - 50 nm and 200 - 400 nm, respectively. It was observed that the diameter of nickel oxide nanotubes is bigger than the pore diameter of AAO template. Li dispersed nickel oxide were consisted of nanoflakes and had structures of nanotubes and nanorods. For increasing the hydrogen adsorption and desorption capacity, the Li dispersed nickel oxide nanotubes were fluorinated. The fluorinated Li dispersed nickel oxide nanotubes showed 1.65 wt% of the hydrogen adsorption capacities at 77 K under 47 atm.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.6
• /
• pp.1077-1084
• /
• 2002

Optimum tool design is carried out fur a multi-stage rectangular cup deep-drawing and ironing process with the large aspect ratio. Finite element simulation is carried out to investigate deformation mechanisms with the initial design made by an expert. The analysis considers the deep drawing process with ironing for the thickness control in the cup wall. The analysis reveals that the difference of the drawing ratio within the cross section and the irregular contact condition produce non-uniform metal flow to cause wrinkling and severe extension. For remedy, the modification guideline is proposed in the design of the tool and the process. Analysis results confirm that the modified tool design not only improves the quality of a deep-drawn product but also reduces the possibility of failure. The numerical result shows fair coincidence with the experimental one. After tryouts of the tool shape, the rectangular cup has been produced in the transfer press.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.11
• /
• pp.1478-1485
• /
• 2000

An experimental study has been performed to investigated the forced convection heat transfer characteristics of 6 circular cylinders in staggered arrangement in a cross flow of air. The water scale deposited on condenser wall of power plant was used to investigate the effect of roughness of scaled surfaces. The relative roughness*average diameter of scale/cylinder diameter) was in a range of k/d=0.0066, 0.0111, 0.0167, 0.0222 and 0.0278. The cylinder spacings(L/d) varies from 1.5 to 4.0 where L denote the cylinder spacings along and normal to the upstream uniform flow direction. The Reynolds number was varied in a range of 10, 000$\leq$ Re $\leq$ 50,000. The local and mean Nusselt numbers were investigated as a function of scale roughness, the cylinder spacing and Reynolds number. The results are compared with those of clean cylinder and inline tube bank, subsequently the mean fouling resistance over the entire circumference was estimated from those results as a function of scale roughness, the cylinder spacing and Reynolds number.

• Journal of Powder Materials
• /
• v.19 no.4
• /
• pp.271-277
• /
• 2012

$SnO_2$ nanotubes were successfully synthesized using an electrospinning technique followed by calcination in air. The nanotubes were the single phase nature of $SnO_2$ and consisted of approximately 14 nm nanocrystals. SEM and TEM characterizations demonstrated that uniform hollow fibers with an average outer diameter of around 124 nm and wall thickness of around 25 nm were successfully obtained. As anode materials for lithium ion batteries, the $SnO_2$ nanotubes exhibited excellent cyclability and reversible capacity of $580mAhg^{-1}$ up to 25 cycles at $100mAg^{-1}$ as compared to $SnO_2$ nanoparticles with a capacity of ${\sim}200mAhg^{-1}$. Such excellent performance of the $SnO_2$ nanotube was related to the one-dimensional hollow structure which acted as a buffer zone during the volume contraction and expansion of Sn.

• Korean Journal of Materials Research
• /
• v.16 no.11
• /
• pp.715-718
• /
• 2006

Porous hydroxyapatite (HAp) scaffolds have been prepared by using the slurry including HAp and magnesia based on the replication of polymer sponge substrate. The influence of MgO content in slurry on the pore morphology and size, density, porosity, and mechanical strength of porous HAp scaffolds was investigated. The obtained scaffolds with average pore sizes ranging 150 to 300 mm had open, relatively uniform, and interconnected porous structure regardless of MgO content. As the MgO content increased, the pore network frame of scaffolds became to be relatively stronger, even though the pore size was not much changed. The compressive strength of the scaffolds increased rapidly with the increase of MgO content because of increasing the pore wall thickness and density of the scaffolds. As a result, the porosity, density, and compressive strength of the porous HAp scaffolds prepared by the sponge method were significantly affected by the addition of MgO.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.2
• /
• pp.197-206
• /
• 2003

A three-dimensional (3-D) method of analysis is presented for determining the free vibration frequencies and mode shapes of solid and hollow hemispherical shells of revolution of arbitrary wall thickness having arbitrary constraints on their boundaries. Unlike conventional shell theories, which are mathematically two-dimensional (2-D), the present method is based upon the 3-D dynamic equations of elasticity. Displacement components μ/sub Φ/, μ/sub z/, and μ/sub θ/ in the meridional, normal, and circumferential directions, respectively, are taken to be sinusoidal in time, periodic in θ, and algebraic polynomials in the Φ and z directions. Potential (strain) and kinetic energies of the hemispherical shells are formulated, and the Ritz method is used to solve the eigenvalue problem, thus yielding upper bound values of the frequencies obtained by minimizing the frequencies. As the degree of the polynomials is increased, frequencies converge to the exact values. Novel numerical results are presented for solid and hollow hemispheres with linear thickness variation. The effect on frequencies of a small axial conical hole is also discussed. Comparisons are made for the frequencies of completely free, thick hemispherical shells with uniform thickness from the present 3-D Ritz solutions and other 3-D finite element ones.

• Journal of Veterinary Clinics
• /
• v.18 no.2
• /
• pp.139-145
• /
• 2001

This study was undertaken to determine the normal serial ultrasonographic appearance of the postpartum uterine involution in small pet dogs (Yorkshire terrier and Maltese). Postpartum changes in uterine shape, architecture, echogenicity and diameter were monitored by ultrasonography in 12 small pet dogs. Serial ultrasonographic examinations were done daily during the first week, 3 days interval from 8 to 30 days, and weekly from 31 to 100 days postpartum. The excretory period of vaginal discharge in 12 normal bitches of uterine involution was finished completely within 3 weeks postpartum. The short axis shape of the uterus was initially often flaccid-appearing. It varied from circular to polygonal. This lasted until 15.75$\pm$3.84 days postpartum, during which time the short axis uterine shape gradually changed to circular. Also, the long axis shape of the uterus was a beaded appearance until 30.89$\pm$4.25 days postpartum. After 30 days, it was appeared as tubular shape between placental and interplacental sites. The ultrasonographic image of the postpartum uterus consisted of four echogenicity distinct layers. Uterine wall was represented as very hyperechoic serosa, hypoechoic myometrium, hyperechoic endometrium and anechoic structures of fluid in the uterine cavity until 7 days postpartum. The individual uterine layers were most prominent during the first week postpartum, and they became progressively less distinct throughout the course of uterine involution. The thickness of myometrium was decreased rapidly in the placental sites from 4.47$\pm$1.42 mm at 1 day to 1.92$\pm$0.26 mm at 16 day, and in the interplacental sites from 3.19$\pm$0.61 mm at 1 day to 1.39$\pm$0.61 mm at 16 day. And it was decreased slowly until 94 day and was been minimum thickness at 94 day. The thickness of endometrium was also decreased like that of myometrium. The uterine diameter in the placental sites was decreased from 22.28$\pm$3.01 mm at 1 day to 16.11$\pm$1.46 mm at 7 day, and in the interplacental sites was decreased from 13.65$\pm$2.34 mm at 1 day to 9.41$\pm$1.59 mm at 7 day postpartum. From 7 day to 93 day, the change of diameter was more and more slow. At 94 days postpartum, the uterine diameter was 5~6 mm both placental and interplacental sites, and the uterine horns were uniform hypoechoic, tubular structures without enlargement. Therefore, complete involution of the uterus occurred at 94 days. It was concluded that normal post partum uterine involution in small pet dogs appeared to be completed 94 days postpartum by gross findings such as vaginal discharges, and by ultrasonographic findings, uterine shape and echogenicity.

• Parasites, Hosts and Diseases
• /
• v.48 no.3
• /
• pp.213-217
• /
• 2010

Sarcocystis sp. infection was investigated in 20 necropsied captive wild mammals and 20 birds in 2 petting zoos in Malaysia. The gross post-mortem lesions in mammals showed marbling of the liver with uniform congestion of the intestine, and for birds, there was atrophy of the sternal muscles with hemorrhage and edema of the lungs in 2 birds. Naked eye examination was used for detection of macroscopic sarcocysts, and muscle squash for microscopic type. Only microscopically visible cysts were detected in 8 animals and species identification was not possible. Histological examination of the sections of infected skeletal muscles showed more than 5 sarcocysts in each specimen. No leukocytic infiltration was seen in affected organs. The shape of the cysts was elongated or Circular, and the mean size reached $254{\times}24.5{\mu}m$ and the thickness of the wall up to $2.5{\mu}m$. Two stages were recognized in the cysts, the peripheral metrocytes and large numbers of crescent shaped merozoites. Out of 40 animals examined, 3 mammals and 5 birds were positive (20%). The infection rate was 15% and 25% in mammals and birds, respectively. Regarding the organs, the infection rate was 50% in the skeletal muscles followed by tongue and heart (37.5%), diaphragm (25%), and esophagus (12.5%). Further ultrastructural studies are required to identify the species of Sarcocystis that infect captive wild animals and their possible role in zoonosis.

• Tuberculosis and Respiratory Diseases
• /
• v.49 no.2
• /
• pp.246-252
• /
• 2000

Lymphangioleiomyomatosis(LAM) is a rare disease of unknown etiology that occurs mainly in woman in her reproductive age. We recently experienced two cases of bilateral diffuse cystic lesion of the lung on chest X-ray and HRCT. The first case, a 26-year-old female, who had been diagnosed with tuberous sclerosis by the presence of clinical manifestation such as mental retardation, bilateral renal angiomyolipoma, adenoma sebaceum and generalized seizure, was admitted due to a recently developed hemoptysis. Chest PA showed diffuse ground-glass opacity with radiolucent cystic lesions of various sizes on both lung fields. HRCT showed innumerable small cystic lesions with suspicious diffuse ground-glass opacity on both lung fields The second case, a 30-year-old fema1e was admitted due to dyspnea and spewing of blood-tinged sputum for 2 weeks, shortly after delivery. Chest PA showed diffuse reticular and ground-glass opacities on both lung field. HRCT showed multiple well-defined and relatively uniform size air cysts with a uniform wall thickness on entire both lung fields, with small amount of right pleural effusion. By thoracoscopic lung biopsy she was diagnosed with pulmonary lymphangioleiomyomatosis. We report these cases with a brief review of the literatures.