대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제26권6호
  • /
  • Pages.1077-1084
  • /
  • 2002
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

유한요소해석을 이용한 세장비가 큰 직사각컵 다단계 디프 드로잉-아이어닝 공정의 최적 금형설계

Optimum Tool Design in a Multi-stage Rectangular Cup Drawing and Ironing Process with the Large Aspect Ratio by the Finite Element Analysis

  • 김세호 (한국과학기술원 기계공학과) ;
  • 김승호 (한국과학기술원 기계공학과) ;
  • 허훈 (한국과학기술원 기계공학과)
  • 발행 : 2002.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Optimum tool design is carried out fur a multi-stage rectangular cup deep-drawing and ironing process with the large aspect ratio. Finite element simulation is carried out to investigate deformation mechanisms with the initial design made by an expert. The analysis considers the deep drawing process with ironing for the thickness control in the cup wall. The analysis reveals that the difference of the drawing ratio within the cross section and the irregular contact condition produce non-uniform metal flow to cause wrinkling and severe extension. For remedy, the modification guideline is proposed in the design of the tool and the process. Analysis results confirm that the modified tool design not only improves the quality of a deep-drawn product but also reduces the possibility of failure. The numerical result shows fair coincidence with the experimental one. After tryouts of the tool shape, the rectangular cup has been produced in the transfer press.

키워드

참고문헌

  1. 허 훈, 2000, '디프 드로잉 - 소형 2차전지 사각케이스의 성형,' 월간 LG 생산기술, 제 3권, 제 2 호, pp.16-18
  2. Chung, S. Y. and Swift, H. W., 1952, 'An Experimental Investigation of Redrawing of Cylindrical Cups,' Proc. Instn. Mech. Engrs., Vol. 1B, pp.437-447
  3. Parsa, M. H., Yamaguchi, K., Takakura, S. and Imatani, S., 1994, 'Consideration of the Re-drawing of Sheet Metals based on Finite Element Simulation,' J. Mater. Process. Technol., Vol. 47, pp. 87-101 https://doi.org/10.1016/0924-0136(94)90087-6
  4. Saito, M., Saiki, H. and Kawai, N., 1989, 'Experimental Analysis of Ironing of Thin Metal Cups,' Trans. ASME, J. Engineering for Industry, Vol. 111, pp. 56-63 https://doi.org/10.1115/1.3188732
  5. Kawai, N., Dohda, K., Saito, M., Hayashi, N. and Wang, Z., 1992, 'Friction Behavior in the Cup Ironing Process of Aluminum Sheets,' Trans. ASME, J. Engineering for Industry, Vol. 11, pp. 175 -180
  6. Avitzur, B., 1983, Handbook of Metal Forming Process, John Wiely & Sons
  7. Tirosh, J., Iddan, D. and Silviano, M., 1992, 'Hydrostatic Ironing - Analysis and Experiments,' Trans. ASME, J. Engineering for Industry, Vol. 114, pp. 237-243
  8. Chang, D. and Wang, J. E., 1997, 'Influence of Process Parameters on the Ironing of Deep-drawn Cups,' Trans. ASME, J. Manuf. Sci. Engrg, Vol. 119, pp. 699 -705 https://doi.org/10.1115/1.2836812
  9. Odell, E. I., 1978, 'A Study of Wall Ironing by the Finite Element Technique,' Trans. ASME, J. Engineeringfor Industry, Vol. 100, pp. 31-36 https://doi.org/10.1115/1.3439342
  10. Baillet, L., Brunet, M. and Berthier, Y., 1996, 'Experimental and Numerical Dynamic Modeling of Ironing Process,' J. Mater. Process. Technol., Vol. 60, pp. 677 - 684 https://doi.org/10.1016/0924-0136(96)02404-1
  11. 김세호, 김승호, 허훈, 2000, '외연적 유한요소 법을 이용한 세장비가 큰 타원형컵 성형공정의 다단계 해석,' 한국소성가공학회지, 제9권, 제3호, pp 313-319
  12. 김승호, 김세호, 허훈, 2000, '세장비가 큰 타원형 컵 성형공정의 다단계 유한요소 역해석,' 한국소성가공학회지, 제9권, 제3호, pp. 304-312
  13. Hallquist, J. O.,1997, LS-DYNA3D User's Manual, Livermore Software Technology Corporation
  14. 전기찬, 1993, 박판금속의 성형 - 이론과 실제 - 반도출판사
  15. 박판금속의 성형 - 이론과 실제 - 전기찬