• 전기학회논문지
• /
• 제58권6호
• /
• pp.1174-1179
• /
• 2009

In this paper we develop the characteristic of density on non-uniform plasma in different layer of the semiconductor with optically controlled microwave pulses. The transient response of the microwave pulses in different plasma layer has been evaluated by calculating the variation of the reflection function of dielectric microstrip lines. The lines has used under open-ended termination containing optically induced plasma region, which has illuminated a laser source. The characteristics impedances resulting from the presence of plasma are evaluated by the transmission line model. The analyzes the variation of transient response in a 0.01cm layer near the surface for frequency range from 1GHz to 128GHz. The diffusion length LD is larger than compared to the absorption depth $l/_{\alpha}l$. The variation of characteristic response in plasma layer with microwave pulses which has in deferentially localized has been evaluated analytically.

• 한국정밀공학회지
• /
• 제30권3호
• /
• pp.317-323
• /
• 2013

In-mold coating is a reactive fluid designed to improve the surface quality of injection molded thermoplastic substrate in functional and cosmetic properties. In this study, a mixing head for in-mold coating was designed, and mixing characteristics of two-component polyurethane flowing through runner were investigated based on flow simulations. In order to achieve uniform mixing of two components injected through straight mixing head, an impingement aftermixer was used in runner design. Semi-circular cross-section was better than circular one for runners for uniform mixing. With increasing runner length and flow rate, mixing became more uniform. In addition, the degree of mixing was more improved with decreasing viscosity of isocyanate.

• Steel and Composite Structures
• /
• 제20권5호
• /
• pp.1087-1102
• /
• 2016

The paper proposes to characterize the free vibration behaviour of non-uniform cylindrical shells using spline approximation under first order shear deformation theory. The system of coupled differential equations in terms of displacement and rotational functions are obtained. These functions are approximated by cubic splines. A generalized eigenvalue problem is obtained and solved numerically for an eigenfrequency parameter and an associated eigenvector which are spline coefficients. Four and two layered cylindrical shells consisting of two different lamination materials and plies comprising of same as well as different materials under two different boundary conditions are analyzed. The effect of length parameter, circumferential node number, material properties, ply orientation, number of lay ups, and coefficients of thickness variations on the frequency parameter is investigated.

• 한국전산유체공학회지
• /
• 제21권3호
• /
• pp.64-70
• /
• 2016

Multiple solutions in natural convection of water with Pr=7 between two horizontal plates with small magnitude non-uniform temperature distribution in the upper plate is numerically investigated. The dimensionless temperature of upper plate is ${\theta}={\epsilon}sinkx$. Two upright cells are formed over one wave length in the conduction-dominated regime of small Rayleigh number. However, multicellular convection occurs above a critical Rayleigh number for small wave number. When k = 1.5, dual solutions are found and a transition of $6{\rightarrow}4$ eddy flow occurs with decrease of Rayleigh number. When k = 0.75, two, three, four and five multiple solutions are observed. Transitions of $14{\rightarrow}12$, $12{\rightarrow}10$, $10{\rightarrow}8$ and $6{\rightarrow}8$ eddy flow occur with decrease of Rayleigh number.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.209-212
• /
• 1988

This paper presents a new uniform sampling method for two-dimensional contour. The proposed method improves the uniformity of contour sampling in terms of the interpolation of the corner points extracted from chain codes. The performance of the proposed method is analyzed through the length estimation and shape recognition of two-dimensional contour. The experimental results show the significant improvement over the conventional method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1834-1836
• /
• 1998

The characteristics of dispersion compensation in uniform fiber grating is studied according to grating length, the refractive index modulation depth, and Gaussian window parameter(G). A 50cm-long uniform grating apodized by Gaussian function(G=10) with bandwidth of ${\sim}0.8nm$ and small noise is designed.

• Structural Engineering and Mechanics
• /
• 제54권4호
• /
• pp.725-740
• /
• 2015

This study presents critical buckling load optimization of the axially graded layered uniform columns. In the first place, characteristic equations for the critical buckling loads for all boundary conditions are obtained using the transfer matrix method. Then, for each case, square of this equation is taken as a fitness function together with constraints. Due to explicitly unavailable objective function for the critical buckling loads as a function of segment length and volume fraction of the materials, especially for the column structures with higher segment numbers, initially, prescribed value is assumed for it and then the design variables satisfying constraints are searched using Differential Evolution (DE) optimization method coupled with eigen-value routine. For constraint handling, Exterior Penalty Function formulation is adapted to the optimization cycle. Different boundary conditions are considered. The results reveal that maximum increments in the critical buckling loads are attained about 20% for cantilevered and pinned-pinned end conditions and 18% for clamped-clamped case. Finally, the strongest column structure configurations will be determined. The scientific and statistical results confirmed efficiency, reliability and robustness of the Differential Evolution optimization method and it can be used in the similar problems which especially include transcendental functions.

• 한국의상디자인학회지
• /
• 제21권2호
• /
• pp.15-25
• /
• 2019

This study was carried out to research the size satisfaction and the actual conditions of house caddie uniforms. Survey participants consisted of 310 caddies at 6 membership golf clubs. In order to perform this study 45 questionnaires were used, which consisted of questions pertaining to size satisfaction and sewing, laundry management, and inconvenience and, most importantly performance. Frequency analysis was implemented using SPSS 10.0. The results of this study could be summarized as followed; The highest dissatisfaction factors in the presently worn uniforms were sleeve length and pants hem width. The highest dissatisfaction factors in the sewing satisfaction were pocket and armpit area. Activity is the most important consideration in the choice of a uniform. These results will be applied to develop a comfortable uniform design.

• Advances in nano research
• /
• 제14권1호
• /
• pp.67-80
• /
• 2023

Economic investigation is one of the main issues regarding the design and production of small-scale structures. This paper concerns the creation, implementation, and economic aspects of the cross-section profile of small-scale structures regarding the dynamic response of the free and forced vibration behavior of spinning nanoscale beams based on big data analysis. According to the financial analysis, the three practical non-uniform functions of cross-sections are compared to the uniform beam in the same weight and the equal material used. The previous studies reported that the uniform beams are more stable and contain a better frequency response based on the mechanical analysis. Still, concerning the economic investigation, which means the considered structures should have equal length and have the same weight in the aspect of material used, the conclusion can be different from the mechanical aspect. Consequently, in the current paper, the dynamic response along with computer technology as well as the big data analysis of the free and forced vibration of the nanobeam regarding the economic shape of the cross-section is scrutinized.

• 콘크리트학회논문집
• /
• 제21권6호
• /
• pp.753-761
• /
• 2009

이 논문은 철근콘크리트 휨부재의 인장겹침이음 영역에서의 정착저항능력에 대한 콘크리트 강도와 피복두께의 영향을 알아보기 위하여 총 24개의 beam-end 실험체의 실험 결과를 정리 분석한 것이다. 콘크리트 강도가 증가할수록 부착응력이 커지고 전달길이가 줄어든다는 부착특성과 얇은 피복에서 쉽게 발생하는 쪼갬균열 및 취성적인 균열 진전과 같은 균열거동을 근거로 하여 현행 설계기준의 등분포부착응력 가정에 의한 정착길이 규정을 고강도 콘크리트에도 그대로 적용할 수 있는지 조사하였다. 그 결과 콘크리트 강도에 따른 정착저항능력은 피복두께의 영향을 크게 받고 있으며, 고강도 콘크리트에서는 현행 설계기준 규정보다 짧은 겹침이음길이를 갖더라도 충분한 안전율을 확보하는 것으로 나타났다. 이러한 실험 결과로부터 고강도 콘크리트의 정착길이는 제곱근 압축강도의 반비례가 아닌 압축강도에 직접적으로 반비례함을 확인하였으며, 현 설계기준에서 보통강도 콘크리트에 적용하는 동일 매입길이에 대한 등 분포부착응력 가정이 아닌 새로운 정착길이 계산식을 제안하였다.