• 설비공학논문집
• /
• 제8권1호
• /
• pp.1-12
• /
• 1996

In lots of application to heat exchanger systems, closed two-phase thermosyphons are tilted from a horizontal. If the tilt angle, especially, is less than 30$^{\circ}$, the operational performances of thermosyphon are highly dependent on tilt angle. The present study was conducted to better understand such operational behaviors as mech-anni는 of phase change, and flow patterns inside a tilted thermosyphon. For experiment, an ethanol thermosyphon with a 35% of fill charge rate was designed and manufactured, using a copper tube with a diameter 19mm and a length 1500mm. Through a series of test, the tilt angle was kept constant at each of 4 different values in the range 10~25deg. and the heat supply to the evaporator was stepwisely increased up to 30㎾/$m^2$. When a steady state was established to the thermosyphon for each step of thermal loads, the wall temperature distribution and vapor temperature at the condenser were measured. The wall temperature distributions demonstrated a formation of dry patch in the top end zone of the evaporator, with a values of temperature 20~4$0^{\circ}C$ higher than the wetted surface for a moderate heat flux q≒20㎾/$m^2$. Inspite of the presence of hot dry patch, however, the mean values of boiling heat transfer coefficient at the evaporator wall were still in a good agreement with those predicted by Rohsenow's formula, which was based on nucleate boiling. For the condenser, the wall temperatures were practically uniform, and the measured values of condensation heat transfer coefficient were 1.7 times higher than the predicted values obtained from Nusselt's film condensation theory on tilted plate. Using those two expressions, a correlation was formulated as a function of heat flux and tilt angle, to determine the total thermal resistance of a tilted thermosyphon. The correlation formula showed a good agreement with the experimental data within 20%.

• Journal of the Korean Data and Information Science Society
• /
• 제21권6호
• /
• pp.1289-1303
• /
• 2010

The need for statistical process control to check the performance of a process is becoming more important in chemical and pharmaceutical industries. This study illustrates the method to determine whether a process is in control and how to produce and interpret control charts. In the experiment, a stream of green dyed water and a stream of pure water were continuously mixed in the process. The concentration of the dye solution was measured before and after the mixer via a spectrophotometer. The in-line mixer provided benefits to the dye and water mixture but not for the stock dye solution. The control charts were analyzed, and the pre-mixer process was in control for both the stock and mixed solutions. The R and X-bar charts showed virtually all of the points within control limits, and there were no patterns in the X-bar charts to suggest nonrandom data. However, the post-mixer process was shown to be out of control. While the R charts showed variability within the control limits, the X-bar charts were out of control and showed a steady increase in values, suggesting that the data was nonrandom. This steady increase in dye concentration was due to discontinuous, non-steady state flow. To improve the experiment in the future, a mixer could be inserted into the stock dye tank. The mixer would ensure that the dye concentration of the stock solution is more uniform prior to entering the pre-mixer ow cell. Overall, this would create a better standard to judge the water and dye mixture data against as well.

• 한국수소및신에너지학회논문집
• /
• 제22권6호
• /
• pp.842-851
• /
• 2011

A multi-cell test system with 25 independent cells is used to test different electrode materials simultaneously for polymer electrolyte membrane fuel cells (PEMFCs). Twenty-five segmented membrane electrode assemblies (MEAs) having the same or different Pt-loading are prepared to analyze the performance deviation of cells in the multi-cell test system. Improvements in the multi-cell test system are made by ensuring that the system performs voltage sensing for the cells individually and inserting optimum gaskets between the MEAs and the graphite plates. The cell performances are improved and their deviations are significantly decreased by these modifications. The performance deviations changed according to various cell configurations because the operating conditions of the cells, such as the gas flow and concentration, differed. This cell system can be used to test multiple electrodes simultaneously because it shows relatively uniform performance under the same conditions as well as linear correlation with various catalyst loadings.

• 대한기계학회논문집A
• /
• 제21권6호
• /
• pp.961-970
• /
• 1997

A numerical method is presented to predict and analyze the shape of a growing billet produced from the "spray forming process" which is a fairly new near-net shape manufacturing process. It is important to understand the mechanism of billet growing because one can obtain a billet with the desired final shape without secondary operations by accurate control of the billet shape, and it can also serve as a base for heat transfer and deformation analysis. The shape of a growing billet is determined by the flow rate of the alloy melt, the mode of nozzle scanning which is due to cam profile, the initial positio of the spray nozzle, scanning angle, and the withdrawal speed of the substrate. In the present study, a theoretical model is first established to predict the shape of the billet and next the effects of the most dominent processing conditions, such as withdrawal speed of the substrate and the cam profile, on the shape of the growing billet are studied. Process conditions are obtained to produce a billet with uniform diameter and flat top surface, and an ASP30 high speed steel billet is manufactured using the same process conditions established from the simulation.imulation.

• 한국세라믹학회지
• /
• 제35권11호
• /
• pp.1155-1161
• /
• 1998

브라운관 funnel glass 내며의 흑연 피막의 저항에 관하여 연구하기 위하여 흑연이 함유된 도전성 도료를 제조하여 flow coating 방법으로 28" wide TV용 funnel glass 내면에 도포하고 흑연피막의 특성과 브라운관의 동작 특성을 평가하였다. 고형분 농도가 증가함에 따라 도전성 도료의 점도와 흑연피막의 두께는 증가하였으며 흑연피막의 전기저항은 감소하였다. 도포 후 건조조건에 따라서도 도전막의 표면상태, 전기저항 및 브라운관의 초기동작 특성등이 다르게 나타났다. 도전성 도료의 고형분 농도는 27%, 점도는 13 cps 전후에서 안정한 흑연피막을 제조할 수 있었으며, 이 때 진공특성이 최적의 상태로 나타났다. 그리고 도전성 도료의 상태와 제조조건에 따라서 브라운관의 다른 전지적 특성들도 변할 수 있기 때문에 브라운관 전체의 특성을 동시에 평가를 해야한다고 생각한다. 그리고 funnel glass에서의 부의 별 저항산포 차리를 줄이기 위해서는 도포 시에 도전성 도료를 주입하는 위치, 건조 조건, funnel glass의 예열 온도 등에 대한 조사도 이루어져야 한다고 생각한다.

• Journal of Mechanical Science and Technology
• /
• 제20권10호
• /
• pp.1765-1772
• /
• 2006

High-pressure die casting such as thixocasting and rheocasting is an effective process in the manufacturing automotive parts. Following the recent trend in the automotive manufacturing technologies, the product design subject to the die casting becomes more and more complex. Simultaneously the injection speed is also designed to be very high to establish a short cycletime. Thus, the requirement of the die design becomes more demanding than ever before. In some cases the product's shape can have multiple slender manifolds. In such cases, design of the inlet and outlet parts of the die is very important in the whole manufacturing process. The main issues required for the qualified products are to attain gentle and uniform flow of the molten liquid within the passages of the die. To satisfy such issues, the inlet cylinder ('bed cylinder' in this paper) must be as large as possible and simultaneously the outlet opening at the end of each passage must be as small as possible. However these in turn obviously bring additional manufacturing costs caused by re-melting of the bed cylinder and increased power due to the small outlet-openings. The purpose of this paper is to develop effective simulation methods of calculation for fluid flows in multiple columns, which mimic the actual complex design, and to get some useful information which can give some contributions to the die-casting industry. We have used a commercial code CFX in the numerical simulation. The primary parameter involved is the size of the bed cylinder. We will show how the very small opening of the outlet can be treated with the aid of the porous model provided in the code. To check the validity of the numerical results we have also conducted a simple experiment by using water.

• 한국환경복원기술학회지
• /
• 제12권3호
• /
• pp.98-105
• /
• 2009

The objective of this study is to develop numerical simulation model for analysing the wind speed reduction effect by coastal forest belts. The horizontally homogeneous turbulent flow equations, which are derived from the Reynolds-averaged Navier-Stokes method, both above the tree canopy and within the canopy were first formulated, and a first-order closure scheme with the capability of accounting the bulk momentum transport term within the canopy was employed. The averaged equations were solved numerically by finite difference method, FTCS (forward time centered space) scheme. The proposed model was also used to numerically investigate the effects of structural characteristic of forest belt on the wind speed. The effects of maximum leaf area density were evaluated, with the leaf area density of $1.0m^2/m^3$, $2.0m^2/m^3$, $3.0m^2/m^3$, and $4.0m^2/m^3$. Vertical distributions of leaf area, both uniform and varied distribution with a height, were also considered. A comparison of wind profile indicated that there was in good agreements between simulated and measured wind speed. Also, the results showed horizontal wind speed decreased under a height of the tree with increasing maximum leaf area density. In conclusion, in applications where computational efficiency and simplicity are desirable, the proposed numerical model has of great capability to determine the vertical turbulent momentum transport and wind profile in the costal forest belt.

• 한국실내디자인학회논문집
• /
• 제21권5호
• /
• pp.162-170
• /
• 2012

This study aims to show the possibility of approaching artistic design through the Bergsonian concept of musical vitality by grasping the expression of his musical vitality at the Chapel at Ronchamp. For the purpose of this study, the aesthetic significance of Bergson's philosophy of life was first contemplated, and a case study analysis was conducted on the vitality of music as temporality at the Chapel at Ronchamp. On this basis, the examples of his musical vitality as metaphysical reality at the Chapel were analyzed. The results of analysis are as follows: First, the Bergsonian vitality of music as temporality at the Chapel is expressed as a sense of movement-through the acoustic form, the modulor corresponding to the scale of the music, the opposite composition of musical changes, the fluid space of the music, and the light and shadow of counterpoint-as having been intended by Le Corbusier in the very process of design. Second, the vitality of music as Bergson's metaphysical reality at the Chapel at Ronchamp is expressed in the image and rhythm of music created by intuitive reminiscences. The acoustic form, the form created by the modulor, the opposite form of composition, the fluid space and the light and shadow as the melody and image of music present continuous diversity as vital flow in a uniform direction. The vitality of music as aesthetical reality is imitated by the rhythm of the music deriving from repetitive movements sensed here. Consequentry, the Chapel at Ronchamp can be seen as a vital design that expresses Bergson's notion of musical vitality, indicating that an approach toward artistic design can be realized through his musical vitality. This study holds significance as basic research on artistic design with philosophy and music as its origin.

• 한국가스학회지
• /
• 제24권1호
• /
• pp.49-55
• /
• 2020

산업용 혹은 발전용 가스터빈에 사용되는 이중 콘형 예혼합 연소기의 다단 연소 특성을 이해하기 위하여 실험적연구를 수행하였다. 이를 위하여 기존에 모두 경사면에 공급되는 연료를 콘부분으로 일부 할애하는 방식으로 다단연소 방식을 구성하였으며 콘에서 분사되는 연료공급은 축방향과 콘 경사면 방향으로 하였다. 다단연소 연소특성을 이해하기 위하여 콘에서의 연료 분사 방향과 연료 분배율 변화에 대한 NOx와 CO의 배출 농도 그리고 벽면 온도분포를 측정하였다. 그 결과 총 연료에 대한 콘으로의 분배율이 3%인 경우 콘에서의 연료 분사방향에 관계없이 노즐내의 예혼합 영역에서 연료가 공기와 균일하게 혼합됨으로서 연소영역의 고온점 감소에 의하여 NOx 배출 농도가 감소된다. 그러나 콘에서 축방향으로 분사되는 연료분배율이 8%로 증가하는 경우 노즐 내부 예혼합 영역으로의 화염 역화로 인하여 NOx의 배출농도가 오히려 증가하게 된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.204-207
• /
• 2003

This paper presents the electrical properties of PTFE (polytetrafluoroethylene) nozzle for circuit breaker. PTFE has been used widely as a nozzle material for circuit breaker. In the arcing environment in a circuit breaker, radiation is considered to be the major energy transport mechanism from the arc to the wall. The fraction of the radiation power is emitted out of the arc and reaches the nozzle wall, causing ablation at the surface and in the depth of the wall. The energy concentration in the material lead to the depolymerization and eventually lead to the generation of decomposed gas as well as some isolated carbon particles. The generation of the decomposed gas in the depth of the material causes inner explosion. The surface of nozzle becomes uneven. The flow of gas is not uniform due to the unevenness of the surface. Adding some fillers into PTFE is expected to be efficient for improving the endurability against radiation. In this experiment, three kinds of fillers that have endurance in the high temperature environment were added into PTFE. Dielectric constant, dissipation factor, electrical resistivity and dielectric strength of PTFE composites were investigated.