• Journal of Magnetics
• /
• 제7권3호
• /
• pp.94-97
• /
• 2002

The dependence on nickel oxide thickness and a ferromagnetic layer thickness in unidirectional and isotropic exchange-coupled NiO/NiFe(Fe) bilayer films was investigated by magnetic force microscopy to better understand the relation between magnetic domain structure and exchange biasing at microscopic length scales. As the NiO thickness increased, the domain structure of unidirectional biased films formed smaller and more complex in-plane domains. By contrast, for the isotropically coupled films, large domains generally formed with increasing NiO thickness including a cross type domain with out-of plane magnetization orientation. The density of the cross domain is proportional to exchange biasing field, and the fact that the domain mainly originated from the strongest exchange coupled region was confirmed by imaging in an applied external field during a magnetization cycle.

• 대한치과교정학회지
• /
• 제24권3호
• /
• pp.621-630
• /
• 1994

The purpose of this study was to evaluate root resorption and alveolar bone resorption pattern by jiggling movement. 16 adult cats were divided into 4 groups(6, 12, 18, 24 days). In test side, mesio-distal jiggling force was applied in right maxillary 1st premolar in 3 days cycle In control side, mesial force was applied in left maxillary 1st premolar. Radiographic and histologic observation were performed in 6, 12, 18, 24 days after force application. The results were as follow: 1. Alveolar bone resorption was more severe by jiggling force than by unidirectional force. 2. Root resorption pattern was not different between jiggling force and unidirectional force. 3. Combined pattern of bone resorption and new bone formation appeared in jiggling group. 4. New bone formation began to appear at periapical area of jiggling group after 24 days, because alveolar bone resorption was severe and extrusion resulted.

• Advances in aircraft and spacecraft science
• /
• 제3권4호
• /
• pp.379-397
• /
• 2016

In this manuscript, free vibrations of a unidirectional composite orthotropic Timoshenko beam based on finite strain have been studied. Using Green-Lagrange strain tensor and comprising all of the nonlinear terms of the tensor and also applying Hamilton's principle, equations of motion and boundary conditions of the beam are obtained. Using separation method in single-harmonic state, time and locative variables are separated from each other and finally, the equations of motion and boundary conditions are gained according to locative variable. To solve the equations, generalized differential quadrature method (GDQM) is applied and then, deflection and cross-section rotation of the beam in linear and nonlinear states are drawn and compared with each other. Also, frequencies of carbon/epoxy and glass/epoxy composite beams for different boundary conditions on the basis of the finite strain are calculated. The calculated frequencies of the nonlinear free vibration of the beam utilizing finite strain assumption for various geometries have been compared to von Karman one.

• 대한기계학회논문집
• /
• 제18권3호
• /
• pp.600-611
• /
• 1994

The purpose of this research is to propose a model for the prediction of residual strength. For this purpose, two-paremeter model based on Caprino's is developed and formulated by the ratio of indentation due to impact and normalized residual strength. The damage zone is considered only as an indentation. Impact tests are carried out on laminated composites by steel balls. Test material is carbon/epoxy laminate. The specimens are composed of $[{\pm}45^{\circ}/0^{\circ}/90^{\circ}]_2$ and $[\pm}45^{\circ}]_4$ stacking sequence and have $0.75^T{\times}0.26^W{\times}100^L(mm) dimension. A proposed model shows a good correlation with the experimental results And failure mechanism due to high impact velocity is discussed on CFRP laminates to examine the initiation and development of damage by fractography and ultrasonic image ststem. The effect of the unidirectional ply position on the residual strength is considered here.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.9-12
• /
• 2002

A parametric study has been conducted to investigate the effect of the geometry on the strength of an unidirectional and fabric hybrid laminated composite joint. Tests are conducted for the specimens with nine different edge-to-hole diameter or width-to-hole diameter ratios. For the finite element analysis, the characteristic length method is used, and the tests for determining the characteristic length are performed additionally. Nonlinear contact problem between the pin and laminate is modeled by the gap element in MSC/NASTRAN. Tsai-Wu failure criteria is applied to the stress on the characteristic curve. The finite element and experimental results shows good agreement in strength of composite joint. Results of the parametric study shows the effect of the geometry is remarkable in the specimens with width-to-hole diameter ratio less than 2.8 and edge-to-hole diameter ratio less than 1.4.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.67-70
• /
• 2005

The carbon fiber reinforced/epoxy laminated composites were fabricated with initial fiber failures within the unidirectional fiber pre-pregnated ply. The fiber failures were made intentionally either parallel to and/or perpendicular to the unidirectional fibers within the ply. The pre-made clear-cut cracks were found to be healed partially after laminating process. The laminates were impacted with or without initial fiber failures within the laminates. The force versus deflection curves were compared. The partially healed laminates showed the reduced laminate stiffness as compared to those without any intentional fiber failures. The impact curves were compared with size and the location of the initial failures varied.

• Journal of information and communication convergence engineering
• /
• 제14권2호
• /
• pp.122-128
• /
• 2016

In the future, hybrid power management systems using fuel cells (FCs) and batteries will be used as the driving power systems of ships. These systems consist of an FC, a converter, an inverter, and a battery. In general, an FC provides steady-state energy; a battery provides the dynamic energy in the start state of a ship for enabling a smooth operation, and provides or absorbs the peak or dynamic power when the load varies and the FC cannot respond immediately. The FC voltage range is very wide and depends on the load; Therefore, the FC cannot directly connect to the inverter. In this paper, we propose a power management strategy and design process involving a unidirectional converter, a bidirectional converter, and an inverter, considering the ship's operating conditions and the power conditions of the FC and the battery. The presented experimental results were verified through a simulation.

• 대한산업공학회지
• /
• 제24권1호
• /
• pp.77-93
• /
• 1998

It is discussed how to locate idle vehicles of AGVS on unidirectional guide paths. The problem is modeled as a median location problem on a cyclic network. The characteristics of the optimal location are analyzed and some useful properties are suggested to reduce the solution space. Based on the properties found, several special types of networks - a pure single-loop type, the loop type with a single branching intersection and the loop type with local branching node - are also analyzed as well as the general cyclic network. In each case of the networks, a solution procedure is suggested. Some numerical examples are provided to illustrate the algorithms developed.

• 한국통신학회논문지
• /
• 제19권6호
• /
• pp.1027-1037
• /
• 1994

고유번호를 기준으로 리더를 선출하는 방법과 시스템의 성능을 높일 수 있도록 리더를 신출하는 방법이 사용되고 있다. 성능을 고려한 리더 선거방법에 대한 이전의 연구는 단방향 지연값을 노드의 성능을 나타내는 선호도로 하였지만 본 연구에서는 양방향 지연값을 노드의 선호도를 하였다. 후보의 수를 다양하게 하여 양방향 선호도에 단방향 선호도에 의하여 선출되는 리더의 질을 최적리더를 뽑을 확률과 상대오차를 기준으로 비교 연구하였다.

• 전산구조공학
• /
• 제9권1호
• /
• pp.77-83
• /
• 1996

이 논문에서는 경계요소법을 사용하여 횡방향의 인장변형률을 받는 단일방향 graphite/epoxy 복합재료의 섬유와 기지의 공유면에 존재하는 모서리 균열에 대한 응력확대계수를 계산하였다. 그러한 균열은 복합재료의 자유경계면에서 발생하는 특이 응력들에 의해 야기될 수 있다. 응력확대계수의 크기는 균열길이가 작은 경우에는 균열길이에 따라 조금씩 증가되다가, 균열길이가 커지면 일정한 값에 이르게 된다.