• Journal of Environmental Science International
• /
• v.23 no.4
• /
• pp.585-594
• /
• 2014

This study Analyzed four of seven runoffs which had happened in 2012 in comparison with the runoffs shown in Kalesto data, using the fixed surface image velocimetry (FSIV) installed at Oedo stream, Jeju Island. As a result of identifying a runoff curve graph, it was analyzed that the flood runoffs calculated with two observation devices were almost equivalent. As the differences in peak flows were 10 $m^3/s$, 0.7 $m^3/s$ and 3 $m^3/s$, the very similar result values were calculated. Even though there were errors in RMSE(Root Mean Square Error) made by two observation devices according to the degree of the peak flow, the values of $R^2$ by flood event were 0.89, 0.87, 0.86 and 0.82, showing the result values almost close to 1. Therefore, there was a very high correlation in flood runoffs calculated with two observation devices. This research method was considered to be a very suitable method to measure unexpected flood runoffs which could happen in the island area such as Jeju island during bad weather.

• KEPCO Journal on Electric Power and Energy
• /
• v.4 no.2
• /
• pp.89-99
• /
• 2018

Downtime and malfunction of industrial rotor machines represents a crucial cost burden and productivity loss. Fault diagnosis of this equipment has recently been carried out to detect their fault(s) and cause(s) by using fault classification methods. However, these methods are of limited use in detecting rotor faults because of their hypersensitivity to unexpected and different equipment conditions individually. These limitations tend to affect the accuracy of fault classification since fault-related features calculated from vibration signal are moved to other regions or changed. To improve the limited diagnosis accuracy of existing methods, we propose a new approach for fault diagnosis of rotor machines based on the model generated by supervised learning. Our work is based on feature residual values from vibration signals as fault indices. Our diagnostic model is a robust and flexible process that, once learned from historical data only one time, allows it to apply to different target systems without optimization of algorithms. The performance of the proposed method was evaluated by comparing its results with conventional methods for fault diagnosis of rotor machines. The experimental results show that the proposed method can be used to achieve better fault diagnosis, even when applied to systems with different normal-state signals, scales, and structures, without tuning or the use of a complementary algorithm. The effectiveness of the method was assessed by simulation using various rotor machine models.

• Journal of the Korean Society of Costume
• /
• v.14
• /
• pp.167-183
• /
• 1990

As an attempt to view Chason costume from a aesthetic perspective, the aesthetic values of the Choson people, as expressed through the aesthetic characteristics of costumes, are pursued in this study. To appreciate the beauty of the traditional Korean costume, the following aesthetic characteristics of Choson costumes are investigated: form, color, pattern, material and ornament. From the view point of aesthetics, this study shows that Choson costume had comfortable and voluminous forms with beautiful curved lines and rhythm. The most favored colors were white and natural colors of materials. However unusual combination of colors such as the contrast of black and white, the harmony of the primary and rainbow colors were often used. Patterns revealed two aspects : while subdued patterns generally prevail, at times the unexpected beauty of primary colored patterns draws our attention. Smooth natural materials were preferred. Ornaments both for practical and decorative purposes were used together with certain colors and patterens, indicating wearer's status and warding off the evil's spirits. The aesthetic values in costumes as expressed through the aesthetic characteristics can be classified into the following categories: the beauty of nature, the beauty of personality, the aesthetics of evil's eye and the beauty of tradition. The beauty of nature, as appreciated by the Chason people through their prevailing nature, the "Pung-rew Spirit" and through their Worship of Heaven, produced aesthetic characteristics in harmony with nature. The beauty of personality influenced by the ethical standard of Confucianism produced aesthetic characteristics in costumes, through which the appropriate personality was shown for the appropriate social status. On the other hand, the aesthetics of evil's eye, rooted deeply in Folk religion and Shamanism, contributed to various aesthetic characteristics, which strongly inclined to sorcery and symbolism through choice of patterns, colors and ornaments. Finally, the beauty of tradition, which was based on the ethics of Confucianism and the Choson people's conservative tendencies, demonstrated the strong tendency to adhere to the external characteristics of the Choson costume. These aesthetic values were the yardsticks of the aesthetic judgment of the Choson people. These values influenced Chason people in designing costumes and in appreciating the beauty of costumes. The aesthetic experience and attitudes of the Chason people, which were based on these aesthetic values, represented their aesthetic consciousness and desires.

• Design & Manufacturing
• /
• v.16 no.4
• /
• pp.52-59
• /
• 2022

Currently, Korea is an aging society and is expected to become a super-aged society in about four years. X-ray devices are widely used for early diagnosis in hospitals, and many X-ray technologies are being developed. The development of X-ray device technology is important, but it is also important to increase the reliability of the device through accurate data management. Sensor nodes such as temperature, voltage, and current of the diagnosis device may malfunction or transmit inaccurate data due to various causes such as failure or power outage. Therefore, in this study, the temperature, tube voltage, and tube current data related to each sensor and detection circuit of the diagnostic X-ray imaging device were measured and analyzed. Based on QC data, device failure prediction and diagnosis algorithms were designed and performed. The fault diagnosis algorithm can configure a simulator capable of setting user parameter values, displaying sensor output graphs, and displaying signs of sensor abnormalities, and can check the detection results when each sensor is operating normally and when the sensor is abnormal. It is judged that efficient device management and diagnosis is possible because it monitors abnormal data values (temperature, voltage, current) in real time and automatically diagnoses failures by feeding back the abnormal values detected at each stage. Although this algorithm cannot predict all failures related to temperature, voltage, and current of diagnostic X-ray imaging devices, it can detect temperature rise, bouncing values, device physical limits, input/output values, and radiation-related anomalies. exposure. If a value exceeding the maximum variation value of each data occurs, it is judged that it will be possible to check and respond in preparation for device failure. If a device's sensor fails, unexpected accidents may occur, increasing costs and risks, and regular maintenance cannot cope with all errors or failures. Therefore, since real-time maintenance through continuous data monitoring is possible, reliability improvement, maintenance cost reduction, and efficient management of equipment are expected to be possible.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.36-39
• /
• 2004

Electrical impedance tomography (EIT) has been suffered from the severe ill-posedness which is caused by the inherent low sensitivity of boundary measurements to any changes of internal resistivity values. So, small noise occur unexpected reconstruction image. Generally in EIT system, if measured voltage includes noise, we can't find object location and resistivity values. In this paper, we propose digital filter for measured voltage in EIT. Newton-Raphson is the most..popular algorithm in EIT, but noise cause to blur image. We use Fourier transform (FT) in order to minimize the noise and design the filter. After filtering, result of reconstruction image is improved better than before filtering.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.1945-1950
• /
• 2011

The pyridinolysis of methyl phenyl phosphinic chloride is investigated kinetically in acetonitrile at -20.0 $^{\circ}C$. The Hammett and Br${\o}$nsted plots for substituent X variations in the nucleophiles are biphasic concave downwards with a break point at X = H, and unusual positive ${\rho}_X$ (= 2.94) and negative ${\beta}_X$ (= -0.48) values are obtained for the strongly basic nucleophiles. A stepwise mechanism with a rate-limiting step change from bond breaking for the weakly basic pyridines to bond formation for the strongly basic pyridines is proposed on the basis of biphasic concave downward Hammett and Br${\o}$nsted plots. Unusual positive ${\rho}_X$ and negative ${\beta}_X$ values are rationalized by the isokinetic relationship. The pyridinolyses and anilinolyses of four $R_1R_2$P(=O)Cl-type substrates, dimethyl, diethyl, methyl phenyl, and diphenyl phosphinic chlorides in acetonitrile are compared to obtain systematic information on phosphoryl transfer reaction mechanism. The combination of the two ligands, Me and Ph, shows unexpected kinetic results for both the anilinolysis and pyridinolysis: greatest magnitude of $k_H/k_D$ (= 2.10) involving deuterated anilines $[XC_6H_4NH_2(D_2)]$ for the anilinolysis, and exceptionally fast rate and biphasic concave downward free energy correlation for the pyridinolysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2760-2769
• /
• 2011

An intelligent autonomous robot generates a plan to achieve a goal. A plan is a sequence of robot actions that accomplish a given mission by being successfully executed. However, in the complex and dynamic real world, a robot may encounter unexpected situations and may not execute its planned actions any more. Therefore, an intelligent autonomous robot must prepare an efficient handling process to cope with these situations to successfully complete a given mission. Plan repair with milestone states is an efficient method to cope with the situation. It retains the advantages of other plan repair procedures. This paper proposes a regressive method of formulating milestone states and a method of assigning weighting values on conditions that compose a milestone state. The task to repair a plan may employ the weighting values as its job priority. The regressive method formulates less complex milestone states and leads to the conditions of a milestone state to take pertinent weighting values for an efficient handling procedure to repair a plan with milestone states.

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.251-254
• /
• 2001

Internal and external forces may be applied on the power cable in the both process of transportation and installation. Even though the EHV power cables have the structure of metal sheath and plastic jacket etc. to minimize these negative influences, the unusual forces result in the unexpected deformation of the cable. Compressing moulded XLPE model cable sheets were prepared and locally dented with round-edge and square-edge tools. All data were analyzed employing Weibull distribution. The breakdown strength of dented molded specimens showed lower values than the normal ones by 10-60%.

• Journal of Urban Science
• /
• v.6 no.2
• /
• pp.11-16
• /
• 2017

Giuseppe Terragni was one of the founding member and a leading Italian Rationalist pursued a new and more rational synthesis between the nationalistic values of Italian Classicism and structural logic of the machine age. Casa Giuliani Frigerio, a four-story apartment housing in Como, is one of his last major work and is worth to investigate the composition of facades in terms of ambiguity. Unlike the Casa del Fascio, it is never possible to read an priori whole and to allow static and unified readings in a traditional alignment. Due to its misalignments found within the facades of Casa Giuliani Frigerio, it is evident to present unstable and disjunctive readings. These distinctive facades are read as layers applied onto some equally unstable underlying layer and form an ensemble of unexpected unity.

• Journal of Distribution Science
• /
• v.13 no.2
• /
• pp.15-24
• /
• 2015

Purpose - Foreign exchange risk control is in an important component in the international supply chain management. This study shows the importance of the reference period in forecasting future exchange rates with a specific illustration of KIKO currency option contracts, and suggests feasible preventive measures. Research design, data, and methodology - Using monthly Won-Dollar exchange rate data for January 1995~July 2007, I evaluate the statistical characteristics of the exchange rate for two sub-periods; 1) a shorter period after the East Asian financial crisis and 2) a longer period including the financial crisis. The key instrument of analysis is the basic normal distribution theory. Results - The difference in the reference period could lead to an unexpected development in contract implementation and a consequent financial loss. We may avoid foreign exchange loss by using derivatives such as forwards or currency options. Conclusions - We should consider not only level values but also the volatilities of financial variables in making a binding financial contract. Appropriate measures may differ depending on the specific supply chain pattern. We may extend the study with surveys on actual risk measures.