• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.4
• /
• pp.289-295
• /
• 2009

In this paper the measurement method of cable's curvature using fiber optic microbend effect and its experimental results are presented. The novel structure of fiber optic microbender, which can generate microbend effect on the optical fiber in the case of both directional bending of cable, was designed. Through the experiment using suggested sensing system, the increasing trend of attenuated optical power was found out under the range from $0.1\;cm^{-1}$ to $0.4\;cm^{-1}$ of curvature. To the multi and distributed measurement, using OTDR, the scattered optical pulses at the bending points are measured and compared with the result which was measured by optical power meter.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.4
• /
• pp.301-307
• /
• 2013

SONAR detection performance is one of the key survivability factors in underwater weapon systems. In order to catch the acoustic ability of SONAR, multilayer SONAR structures are analyzed using the elastic theory. The applied results for the simple models are compared with those from commercial program, ANSYS, and the reliable results are obtained. The analysis of sound pressure level (SPL) and echo reduction (ER) by the thickness change of multilayer SONAR structures are performed using the verified elastic theory. As the thickness of anechoic layer is increased, SPL is distributed evenly and ER is increased slightly with the frequency. In decoupling layers and steel layers, SPL are hardly changed and ER is slightly decreased with the thickness increase of those layers. SPL and ER are not affected by the thickness change of the carbon reinforced plastic (CRP) layer. Therefore, to improve the acoustic ability of multilayer SONAR structures, the thickness increase of the anechoic layer and minimization of the decoupling layer, steel layer and CRP layer are desirable.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.6
• /
• pp.419-424
• /
• 2017

TDoA (Time Difference-of Arrival) or DoA (Direction-of-Arrival) can be used for source localization. However, the localizing performance is dependent on relative position between source and receivers, receivers' geometric structure, sound speed, and so on. In this paper we propose a source localization method with enhanced performance that combines multiple information. The proposed method uses the time TDoA, DoA and sound speed as variables. LM (Levenberg-Marquardt) method which is one of nonlinear optimizations is applied. The performances of the proposed method was evaluated by simulation. As result of simulation, the proposed method has the lower average localizing error performance than the previous method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.7
• /
• pp.1455-1463
• /
• 2017

Global economy has recorded low growth, low consumption, high unemployment rate, high risk, short boom and long recession. As a result, maritime economy declines and the reduction of maintenance costs is inevitable. Thus, Studies such as green ship, eco ship, and smart ship are being actively conducted to save energy of ship. Power management system that use batteries in green ship is an important research area. In this paper, we analyze the heavy load control of a power management system of a general ship using only a generator, and study a heavy load control algorithm for a battery connected power management system. To study this, a structure of battery connected power management system is proposed and a battery connected power simulator was constructed based on the proposed system. Through the simulator, the operation of the battery according to the heavy load control is defined and confirmed in the battery connected power management system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3244-3251
• /
• 2012

In the construction and operation of large marine structure, hazard risk analysis is one of important factors. Therefore, this paper investigates the hazard risk indexes and evaluates the risk level in the construction and operation of SFT on the basis of expert survey and Fuzzy analytic hierarchy process. Hazard risk is divided into natural hazard risk (earthquake, typhoon, tsunami, and ice collision) and human factor hazard risk (fire, explosion, traffic accident, ship or submarine collision). Also, the influence of hazard risk indexes on SFT was evaluated in tunnel tube, supporting system, ventilation tower, foundation, and connection part. As the hazard risk level of SFT is compared with those of bridge, underwater tunnel, and immersed tunnel, the intrinsic risk level of SFT was evaluated. Tsunami and earthquake had higher risk level in natural hazard risk, and the risk levels of fire and explosion were higher in human factor hazard risk. Hazard risk level of SFT was 1.4 times higher than immersed tunnel, and 3.2 times higher than bridge.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.3
• /
• pp.298-307
• /
• 2011

The species composition and distributions of subtidal marine algae on the east coast of Korea were studied. We examined all species found in permanent quadrats at three depths (3 m, 5 m and 10 m) at Sacheon between October 2008 and December 2009. Coverage and frequency data were collected monthly via underwater photography and analyzed using a modified photo quadrat method. Of the 82 species identified, 10 were chlorophytes, 21 were phaeophytes, 50 were rhodophytes, and one was a seagrass. The largest number of species (59) was found 10 m deep, while the fewest (39) species were present at 5 m. A total 17 species (two green, five brown, and 10 red algae) occurred at all three depths. The vertical distribution of the study site was characterized by the melobesioidean algae, Ulva pertusa, Sargassum confusum, Phyllospadix iwatensis, and Codium arabicum at 3 m deep, melobesioidean algae and U. pertusa at 5 m deep, and Corallina pilulifera, Prionitis cornea, Chondracanthus tenellus and melobesioidean algae at 10 m deep. Given that coralline algae such as melobesioidean algae and C. pilulifera play important roles in coastal ecosystems, thorough studies on the spatial and temporal variations of coralline algae and the dynamics of marine algal communities on the east coast of Korea are now required.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.455-471
• /
• 2013

Active sonar has been commonly used to detect targets existing in the shallow water. When a signal is transmitted and returned back from a target, it has been distorted by various properties of acoustic channel such as multipath arrivals, scattering from rough sea surface and ocean bottom, and refraction by sound speed structure, which makes target detection difficult. It is therefore necessary to consider these channel properties in the target signal simulation in operational performance system of active sonar. In this paper, a monostatic active sonar system is considered, and the target echo, reverberation, and ambient noise are individually simulated as a function of time, and finally summed to simulate a total received signal. A 3-dimensional highlight model, which can reflect the target features including the shape, position, and azimuthal and elevation angles, has been applied to each multipath pair between source and target to simulate the target echo signal. The results are finally compared to those obtained by the algorithm in which only direct path is considered in target signal simulation.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.2
• /
• pp.178-185
• /
• 2011

In this paper, we propose the position estimation algorithm based on the multisensor fusion using equalization of state variables and feedback structure. First, the state variables measured from INS of main sensor with large error and DVL of assistance sensor with small error are measured before prediction phase. Next, the equalized state variables are entered to each filter and fused the enhanced state variables for prediction and update phases. Finally, the fused state variables are returned to the main sensor for improving the position estimation of UUV. For evaluation, we create the moving course of UUV by simulation and confirm the performance of position estimation by applying the proposed algorithm. The evaluation results show that the proposed algorithm is the best for position estimation and also possible for robust position estimation at the change period of moving courses.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.9
• /
• pp.1039-1048
• /
• 2011

This research develops a basic design structure for scuba diving wetsuits suitable for the shape of Korean men in their 30's as well as enhances the reduction rate for underwater activity. The clothing pressure and fitness tests were performed using four different types of body suits. The usable data of the tests were coded for further statistical analysis that includes one way-ANOVA test and S-N-K Multiple Range Test by using SPSSWIN 17.0. An analysis of the results shows: (1) The results of the clothing pressure test (using a dummy) indicated that the larger the reduction rate, the stronger the clothing pressure gets (with an exception on the knee area). It has great impact on clothing pressure with regards to the different body parts. The different reduction rates should be applied to body parts accordingly. (2) In the case of test subjects, the overall mean values of the clothing pressure were lower than the ones with the dummy (attributable to the cushion function of body skin and muscle as well as the high stretch of the fabric). (3) In evaluating the subjective fit test of four types of body suits, a statistically significant difference was found in the relation between pattern reduction rates and all parts of the body. It was revealed that the reduction rate of 'B' pattern (X: 4%, Y: 3%) was the most suitable pattern and the 'B' pattern scored highest in the motion functional fit test performed by a test subject.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.5
• /
• pp.309-316
• /
• 2012

This paper suggest configuration method of small-size system and design method of module using multi power. In particular module designed to focus on PDN(Power Distribution Network) and filter configuration method to improve the characteristics of noise sensitive analog IC. For the prevention of high-voltage noise, manufactured module is used the ground-isolated technique and via stitching, and is connected grounds with a series of filters. In this paper, so we analyzed PDN structure through the simulation using lumped modeling and confirmed through measurement. Simulation results, when connecting 4.7uH inductor, we made certain that noise of -7dB decreases much more than when it did not. And it was confirmed 12% less than Background Noise.