• The Journal of the Acoustical Society of Korea
• /
• v.36 no.6
• /
• pp.419-424
• /
• 2017

TDoA (Time Difference-of Arrival) or DoA (Direction-of-Arrival) can be used for source localization. However, the localizing performance is dependent on relative position between source and receivers, receivers' geometric structure, sound speed, and so on. In this paper we propose a source localization method with enhanced performance that combines multiple information. The proposed method uses the time TDoA, DoA and sound speed as variables. LM (Levenberg-Marquardt) method which is one of nonlinear optimizations is applied. The performances of the proposed method was evaluated by simulation. As result of simulation, the proposed method has the lower average localizing error performance than the previous method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.3
• /
• pp.235-240
• /
• 2011

A flexible hose attached to a mother ship experiences various motions that depend on the movement of the mother ship and that of underwater vehicle. Although the motion of the hose is a very important factor that determines how a mother ship should be steered in a real situation, it is difficult to experimentally obtain information about the hose motion. Therefore, we study the motion of the hose analytically. The ANCF(absolute nodal coordinate formulation) was used to model the hose, because this formulation can relax the Euler-Bernoulli theory and the Timoshenko beam theory and allow the deformation of the cross section. The mother ship is assumed to be a rigid body with 6 degrees of freedom. The motion of the hose is predominantly affected by the behavior of the mother ship and by the fluid flow.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.8
• /
• pp.570-575
• /
• 2004

In the underwater acoustic systems. we can receive signals and retrieve information about a target by using a beamforming method. The most important thing in the beamforming is finding the way to optimize the mainlobe beamwidth and the sidelobe level to the desired value. One of the prominent results of beamforming method. which has been studied. is Philip's weighting function method(1) . Philip's method adaptively adjusts its weights of array to meet the desired mainlobe beamwidth and sidelobe level. It is very similar to the design method in adaptive filter. However. this method cannot easily bring us to the desired sidelobe level due to complementary relation between mainlobe beamwidth and sidelobe level. In this paper, we propose a new algorithm using partial constrained adaptation. This method makes us circumvent the above problem and meet the specification of design easily. The proposed algorithm presents a Pattern synthesis that designer can easily control the mainlobe beamwidth and the sidelobe level to the desired value while calculation time to converge is decreasing.

• Ocean and Polar Research
• /
• v.28 no.3
• /
• pp.225-236
• /
• 2006

Seagrass meadows are considered as critical habitats for a wide variety of marine organisms in coastal and estuarine ecosystems. In many cases, studies on the spatial/temporal distribution of seagrass have depended on direct observations using SCUBA diving. As an alternative method fur studying seagrass distribution, an application of hydroacoustic technique has been assessed for mapping seagrass distribution in Dongdae Bay, on the south coast of Korea, in September 2005. Data were collected using high frequency transducer (420 kHz split-beam), which was installed with towed body system. The system was linked to DGPS to make goo-referenced data. Additionally, in situ seagrass distribution has been observed using underwater cameras and SCUBA diving at four stations in order to compare with acoustic data. Acoustic survey was conducted along 23 transects with 3-4 blot ship speed. Seagrass beds were vertically limited to depths less than 3.5m and seagrass height ranged between 55 and 90cm at the study sites. Dense seagmss beds were mainly found at the entrance of the bay and at a flat area around the center of the bay. Although the study area was a relatively small, the vertical and spatial distributions of the seagrass were highly variable with bathymetry and region. Considering dominant species, Zostera marina L., preliminary estimation of seagrass biomass with acoustic and direct sampling data was approximately $56.55g/m^2$, and total biomass of 104 tones (coefficient variation: 25.77%) was estimated at the study area. Hydroacoustic method provided valuable information to understand distribution pattern and to estimate seagrass biomass.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.1
• /
• pp.1-11
• /
• 2000

A low frequency, high power hydroacoustic transducer with 7 tonpilz piston elements assembled in a circular array suitable for marine application, such as the transmission of underwater information and the development of new fisheries resources in the deep sea zone was designed. A modified Mason's model was applied to monitor and to simulate the transducer behavior at each step during the fabrication. The in air, and in water constructed tonpilz transducer was tested experimentally and numerically by changing the size and the type of the material for head, tail and acoustic window. Also, the developed transducer was excited by pulse signals and the received waveform was analyzed. The resonance peaks in the transmitting voltage response(TVR) of a single tonpilz element without housing were observed at 11.33kHz in air and 10.93kHz in air and 10.93 kHz in water, respectively, with the overall electrical-acoustic efficiency of 43.7%. The value of TVR of single tonpilz element with aluminum housing in water was 129.87dB re 1 $\mu$Pa/V at 12.25 kHz with the frequency bandwith of 2.15 kHz and half beam angle of 30.2$^{\circ}$at -3dB.The resonance peaks in the transmitting voltage response of the 7 element circular transducer were observed at 11.50 kHz in air and 11.45 kHz in water, respectively. The value of TVR in water 144.84 dB re 1$\mu$Pa/V at 11.5kHz with the frequency bandwith of 4.25 kHz and the half beam angle of $22.3^{\circ} $ at -3dB.Reasonable agreement between the experimental measurements and the theoretical predictions for the directivity patterns, TVRs and the impedance characteristics of the designed transducer was achieved.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.4
• /
• pp.375-381
• /
• 2002

Depth of water information is obtained mainly from echo-sounding instrument which observes the round-trip time of signal from water surface to the bottom. Photogrammetry, underwater survey and laser survey etc. are also used as another method of bathymetric surveying. These methods are used specially for making track chart in a shallow water area. On the other hand, aircraft or satellite imagery ara also used in the sea area where the effect of suspended material is low and water quality is good. Presently, general bathymetric surveying has been performed in our country, but the spatial density of surveyed point are relatively low. Therefore, in this study we built a grid water depth chart which measured combing echosounder with GPS-RTK method and the depth accuracy was analyzed by using the data of direct survey water depth. As a results, the bathymatric mapping which use echosounder is more economical method compared to the existing methods.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.2E
• /
• pp.57-64
• /
• 1995

In this study, we examine the applicability of the classifier based on an artifical neural network (ANN) for the low-frequency acoustic signal in shallow water environment. The estimations of the Doppler shift and frequency spreading effect at 220 Hz reveal the frequency variation of less than 2 Hz with time This small variation enables the ANN-based classifier to identify signals using only tonal frequency information. The ANN consists of 4 layers, and has 60 input processing elements (PEs) and 4 output PEs, respectively. When measured tonal signals in the frequency 200-250 Hz are applied to the ANN-based classifier, the classifier can identify more than 67% of the signals for instantaneous frame and more than 91% for averaged one over 5 frames.

• Journal of the Optical Society of Korea
• /
• v.20 no.5
• /
• pp.547-556
• /
• 2016

A fishing lamp is the instrument for attracting distributed fish to a certain place, and is the lighting system mainly used in fishery. In the inshore fishing, most fishing lamps are used for squid and hairtail jigging fishing, and the light source of the fishing lamps mainly used is metal halide with 1.5 KW in electric power consumption. We will analyze the irradiance distribution according to depth because squid is attracted towards light. To analyze irradiance distribution by such fishing lamps, data for seawater Type-II among the seawater types defined in 1976 are applied to East Sea. However, the Type-II data have limitations in analyzing precise seawater transmission characteristics, due to insufficient information on deep seawater. This paper analyzed the irradiance distribution of fishing lamps using the measurement of transmission characteristics in the seawater in East Sea up to 100 m underwater instead of Type-II data, which is not sufficient for transmission. A compensation factor was drawn between the actual measurement data and Type-II data through seawater transmission characteristics simulation.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.279-285
• /
• 2020

The study on the temporal and spatial monitoring of passing vessels is important in terms of protection and management the marine ecosystem in the coastal area. In this paper, we propose the automatic detection technique of passing vessel by utilizing an artificial intelligence technology and broadband striation patterns which are characteristic of broadband noise radiated by passing vessel. Acoustic measurements to collect underwater noise spectrum images and ship navigation information were conducted in the southern region of Jeju Island in South Korea for 12 days (2016.07.15-07.26). And the convolution neural network model is optimized through learning and validation processes based on the collected images. The automatic detection performance of passing vessel is evaluated by precision (0.936), recall (0.830), average precision (0.824), and accuracy (0.949). In conclusion, the possibility of the automatic detection technique of passing vessel is confirmed by using an artificial intelligence technology, and a future study is proposed from the results of this study.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.4
• /
• pp.345-353
• /
• 2004

Target strength (TS) of Japanese common squids (Todarodes pacificus) were measured using 38 and 120 kHz split beam scientific echosounders under the live condition. For the TS measurement of an individual, a total of 3 squids (mantle length (ML): 22.8, 25, and 27 cm) were used using small fishhook method, whereas for measurement of swimming angle, a total of 8 squids (ML: 21-27 cm) were used under live condition, confined with net cage with 2 m diameter At the same time, two underwater video cameras enabled continuous monitoring of squid behavior. Considering normal behavior, the mean TS at 38 and 120 kHz varied from -48.6 to -45.9 dB, and from -46.5 to -44.6 dB, respectively In both frequencies, mean TS at 120 kHz is relatively higher than that of 38 kHz, approximately 1.3-2.5 dB. From free living condition, the mean swimming angle of the squlds was $-24^{\circ}$. The results of the measurement will be provided basic information for conducting acoustic surveys of the squid.