• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.9
• /
• pp.401-408
• /
• 2014

This paper proposes an optimum operation method for open type ground heat exchangers. A series of TRTs and artificial heating/cooling operations were carried out while monitoring temperature in the hole of SCW. The ground temperature naturally increases with depth, but a switch between the cooling/heating mode results in a change in the distribution of ground temperature. The effect of the mode change was evaluated by performing LMTD and COMSOL multiphysics analysis for a reduced model with the depth of 150 m. As a result, in the cooling mode, the upstream operation is more efficient than the downstream operation and reduces EWT by $2.26^{\circ}C$. On the other hand, in the heating mode, the downstream operation is advantageous over the upstream operation and increases EWT by $3.19^{\circ}C$. The merit of the optimum operation will be enhanced for the typical dimension of SCW with a depth of 400~500 m. In the future, an open type ground heat exchanger system adopting the optimum operation with variation in the ground temperature will be used in practice.

• Journal of Convergence for Information Technology
• /
• v.10 no.10
• /
• pp.128-134
• /
• 2020

Recently, the damages by typhoons and heavy rains are increasing due to the climate change. However, we are still vulnerable to inundation disaster due to various causes such as poor physical flood control and lacks of disaster and safety management. Therefore, it is necessary to establish systems to ensure safety and prepare practical countermeasures that can minimize damage when an inundation occurs, thereby minimizing economic loss and casualty. In this study, hydrodynamic inundation modelings were implemented to analyze the "Noryangjin reservoir inundation accident" and "Choryang No. 1 underground road inundation accident." and spatial risk was assessed by a quantitative hazard index. In addition, cause and effect diagrams were provided to present the risk causes in terms of physical and managemental aspects.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.2
• /
• pp.169-181
• /
• 2018

For performance analysis of flood prevention projects, this study performed simulation (SWMM) for the five sites where the projects have been completed. The models were constructed using watershed and sewer information of the project sites and were verified using flood records in the past to improve accuracy. In this simulation, the design rainfall data (probability 30~50 years) and the rainfall data in the summer of 2017 were applied. When the design rainfall data was applied to the models, simulation results presented that all the sites were flooded before the projects, but after the projects all the sites were not flooded due to improve discharge capacity. And when the rainfall data in the summer of 2017 was applied to the models, simulation results presented that all the sites were flooded before the projects, but after the projects any sites did not occur flooding in this summer. So if the projects had not been completed, all the sites might be flooded in the summer of 2017. These effects were analyzed as the improvement of discharge capacity due to rehabilitation of sewer, construction of underground tunnel and pumping station, etc. As the results, ratio of sewer that water depth exceed diameter reduced from 52.3~75.8% to 17.1~39.8%.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.3
• /
• pp.60-66
• /
• 2011

The$PM_{10}$ concentrations in the underground should be monitored for the health of commuters on the subway system. Seoul Metro and Seoul Metropolitan Rapid Transit Corporation are measuring several air pollutants regularly. In this paper, the reliability of the instruments using light scattering method is improved with the help of a linear regression analysis technique to measure the $PM_{10}$ concentrations continuously in the subway stations. In addition, an USN monitoring system is implemented to display and record the data of $PM_{10}$, CO/$CO_2$, humidity, and temperature. To transmit and receive these measured sensor data, 2.4GHz Zigbee, 424MHz wireless communication, and CDMA M2M method are applied and evaluated.

• Geophysics and Geophysical Exploration
• /
• v.6 no.1
• /
• pp.1-6
• /
• 2003

As a consequence of geophysical surveys for large-scale constructions and ground investigations, huge amount of geophysical data are collected. However, due to the lack of the systematic management of such data, most of them are used temporarily and kept in dead storage, which in turn leads the abuse of social properties. To propose the solution of this kind of problem, geophysical data are kept in database using geographical information system (GIS). The introduction of GIS in geophysical data management allows the efficiency in data management and user-friendliness in data access. This data management system is especially appropriate for the many geological companies and the government organizations in systematic data management and sharing so that the time ,md financial expenses are greatly reduced. This system even provides the basic data services for the efficient development and conservation of the surface and underground spaces.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.40-44
• /
• 2009

지하구는 도시의 신경망이라 할 수 있는 통신, 전력, 상수도, 난방, 쓰레기 처리시설 등 도시 운용/관리를 위한 주요시설물을 안전하게 수용하고, 유지 관리하기 위한 시설로 IT기술을 이용하여 수용된 시설을 효과적으로 유지/관리하고, 재난으로부터 안전하게 보호함과 동시에 최소의 비용과 에너지로 수용된 시설물을 유지관리하기 위한 연구가 많이 진행되고 있다. 따라서 본 논문에서는 지하구(공동구, 통신구, 전력구)의 운용 및 유지관리와 지하구에서 발생될 수 있는 각종 재난에 대응하기 위한 지하구 운용 및 유지관리에 대해 알아보고, 지하구 내부에 수용된 시설물을 효과적으로 유지관리하고 재난에 신속히 대응하기 위한 지하구 환경모니터링 시스템에 대해 기술 하고자 한다. 지하구 환경모니터링 시스템은 지하구 내부에는 전력, 상수도, 통신, 난방 등 다양한 시설물이 수용되어 있으며, 이러한 시설물의 부식, 고장 등으로부터 보호하기 위해 지하구내부의 환기시스템의 송풍기와 지하수와 기상재해로 인한 지하구 및 수용시설물의 침수를 막기 위한 양수펌프에 대해 실시간 상태모니터링 통해 송풍기 및 펌프의 고장여부를 판단하여 관리자에게 알림으로써 관리자가 신속하게 대응 할 수 있도록 하였다. 송풍기의 제어는 지하의 내부와 외부에 설치된 온/습도 센서를 통해 지하구 내부환경을 최적으로 유지할 수 있도록 함으로써 쾌적한 지하 내부환경 유지하고, 급/배기가 필요할 경우에만 송풍기를 가동함으로써 에너지를 절약 할 수 있으며, 화재, 침수 등에 대한 재난시 환풍기의 급/배기, 정지 등을 신속하게 제어할 수 있도록 하였다. 또한 지하구내부에서 발생된 재난을 유/무선을 이용하여 신속하게 지하구 주변의 장치(U-Pole 또는 통합컨트롤러)를 통해 경보를 전파함으로써 주변 시민들이 안전하게 대피할 수 있도록 하였다. 그리고 지하구 환경모니터링 시스템을 검증하기 위해 실제 지하구 및 실험실에 시스템 및 Test Board을 설치하여 운용시험을 실시 하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.1
• /
• pp.27-32
• /
• 2008

In the signals-shadowed areas, In order to providing the suitable signals reception level repeaters are used for relay the signals. Repeater receives the weak signals and amplifies it up to required power level, The amplified signals get radiated by the various methods. Both antenna distribution and LCX(Leakage Coaxial Cable) are typical methods in the repeater and BTS signals radiation. Their applications are depended on the environment condition and frequency band. Generally the antenna distribution are used for the mobile telecommunication networks which use the higher frequency band than 500MHz. On the other side, LCX distribution is suitable to the frequency band under 500MHz. The network plan of repeater in FM, T-DMB, Fire Radio and Internal subway communication network are the typical LCX application fields. Cell planning with repeaters are based on the free space loss, LCX connection loss and actual field data. The actual field data can be the most important factor to design the network planning.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1D
• /
• pp.127-132
• /
• 2011

Load managing method on road became necessary since overloaded vehicles occur damage on road facilities and existing systems for preventing this damage still show many problems. Accordingly, efficient managing system for preventing overloaded vehicles could be organized by using the road itself as a scale by applying genetic algorithm to analyze the load and the drive information of vehicles. First of all, accurate analysis of load using the behavior of road itself is needed for solving illegal axle manipulation problems of overloaded vehicles and for installing intelligent embedded load analyzing system. Accordingly in this study, to use the behavior of road, the transformation was measured by installing underground box type indoor model and indoor experiment was held using genetic algorithm and 10% error were checked.

• The Journal of Society for e-Business Studies
• /
• v.23 no.2
• /
• pp.33-47
• /
• 2018

City gas pipelines are buried underground. Because of this, pipeline is hard to manage, and can be easily damaged. This research proposes a real time prediction system that helps experts can make decision about pressure anomalies. The gas pipline pressure data of Jungbu City Gas Company, which is one of the domestic city gas suppliers, time variables and environment variables are analysed. In this research, regression models that predicts pipeline pressure in minutes are proposed. Random forest, support vector regression (SVR), long-short term memory (LSTM) algorithms are used to build pressure prediction models. A comparison of pressure prediction models' preformances shows that the LSTM model was the best. LSTM model for Asan-si have root mean square error (RMSE) 0.011, mean absolute percentage error (MAPE) 0.494. LSTM model for Cheonan-si have RMSE 0.015, MAPE 0.668.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.378-384
• /
• 2020

The location information of the people or mover is essential for supporting various smart mobility services in railway stations which are mostly underground. For this purpose, a smart braille block is proposed to identify the location of the mover of the people. In this paper, the frequency characteristics of each material of the upper and lower parts of the braille block are analyzed to examine the appropriate materials for railway history. In addition, the guidelines for actual manufacturing were derived by analyzing the separation distance between two RF sensors in the smart braille block. As a result of analysis through the characteristic analysis in this paper, after selecting the material suitable for the construction site when the smart braille block is applied, the performance change of the RF system, especially the antenna that greatly influences the RF performance, must be reviewed in advance. It seems to have to be applied after checking through.