• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.6
• /
• pp.135-146
• /
• 2011

Steel structures have been generally painted to prevent corrosion damage. However, the painted film is deteriorated with increase in service life, and then corrosion damage resulting in cross sectional area occurs on steel surface. As a result, the buckling strength of steel structures can be decreased due to the corrosion damages. The evaluation method of the axial buckling strength of columns about a variety of section shapes and supporting conditions have been presented, but evaluation method of buckling strength about irregular nonprismatic columns is not established. In this study, the axial buckling strength of corroded steels was evaluated based on the buckling test results of corroded steel specimens that were cut off at a temporary steel structure. The corroded specimens were picked up total 10 specimens according to various slenderness ratio from the web of a temporary structure's main beam. The length of specimens is 200, 300, 400, 500 and 600mm respectively. The rust productions were removed by the chemical treatment. Then, the surface geometry was measured at intervals of $1{\times}1mm$ by using the optical 3D digitizing system, and the residual thickness of the specimens was calculated. The axial buckling test was performed on 10 corroded specimens and 12 non-corroded specimens under the fixed-fixed support condition. From the test results, the effect of corrosion damages on axial buckling load was investigated. Regardless of corrosion damage degree, the axial buckling strength of corroded specimens and non-corroded specimens was evaluated identically by using minimum average residual thickness or average residual thickness to minus its standard deviation. Reasonable measuring intervals of residual thickness was proposed by using the results to apply for practical works.

• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.447-457
• /
• 2008

Laboratory tests for single plane sliding were conducted using the model rock slope to investigate the cut slope deformability and failure mechanism due to combined effect of engineering characteristics such as angle of sliding plane, water force, joint roughness and infillings. Also the possibility of prediction of slope failure through displacement monitoring was explored. The joint roughness was prepared in forms of saw-tooth type having different roughness specifications. The infillings was maintained between upper and lower roughness plane from zero to 1.2 times of the amplitude of the surface projections. Water force was expressed as the percent filling of tension crack from dry (0%) to full (100%), and constantly increased from 0% at the rate of 0.5%/min and 1%/min upto failure. Total of 50 tests were performed at sliding angles of $30^{\circ}$ and $35^{\circ}$ based on different combinations of joint roughness, infilling thickness and water force increment conditions. For smooth sliding plane, it was found that the linear type of deformability exhibited irrespective of the infilling thickness and water force conditions. For sliding planes having roughness, stepping or exponential types of deformability were predominant under condition that the infilling thickness is lower or higher than asperity height, respectively. These arise from the fact that, once the infilling thickness exceeds asperities, strength and deformability of the sliding plane is controlled by the engineering characteristics of the infilling materials. The results obtained in this study clearly show that the water force at failure was found to increase with increasing joint roughness, and to decrease with increasing filling thickness. It seems possible to estimate failure time using the inverse velocity method for sliding plane having exponential type of deformability. However, it is necessary to estimate failure time by trial and error basis to predict failure of the slope accurately.

• Radiation Oncology Journal
• /
• v.22 no.4
• /
• pp.288-297
• /
• 2004

Puporse: The aims of this study were to evaluate the change of $[^18F]fluoromisonidazole$($[^18F]FMISO$) uptake in C3H mouse squamous cell carcinoma-VII (SCC-VII) treated with mild hyperthermia ($42^{circ}C$) and nicotinamide and to assess the biodistribution of the markers in normal tissues under similar conditions. Methods and Materials: $[^18F]FMISO$ was producedby our hospital. Female C3H mice with a C3H SCC-VII tumor grown on their extremities were used. Tumors were size matched. Non-anaesthetized, tumor-bearing mice underwent control or mild hyperthermia at $42^{circ}C$ for 60 min with nicotinamide (50 mg/kg i.p. injected) and were examined by gamma counter, autoradiography and animal PET scan 3 hours after tracer i.v. injected with breathing room air, The biodistribution of these agents were obtained at 3 h after $[^18F]FMISO$ injection. Blood, tumor, muscle, heart, lung, liver, kidney, brain, bone, spleen, and intestine were removed, counted for radioactivity and weighed. The tumor and liver were frozen and cut with a cryomicrotome into 10- um sections. The spatial distribution of radioactivity from the tissue sections was determined with digital autoradiography. Results: The mild hyperthermia with nicotinamide treatment had only slight effects on the biodistribution of either marker in normal tissues. We observed that the whole tumor radioactivity uptake ratios were higher in the control mice than in the mild hyperthermia with nicotinamide treated mice for $[^18F]FMISO$ ($1.56{\pm}1.03$ vs. $0.67{\pm}0.30$; p=0.063). In addition, autoradiography and animal PET scan demonstrated that the area and intensity of $[^18F]FMISO$ uptake was significantly decreased. Conclusion: Mild hyperthermla and nicotinamide significantly improved tumor hypoxia using $[^18F]FMISO$ and this uptake reflected tumor hypoxic status.

• The Journal of Internal Korean Medicine
• /
• v.18 no.2
• /
• pp.1-26
• /
• 1997

Chunggeumtang has been used in Korea for many centuries as a treatment for respiratory disease. The effect of Chunggeumtang on tracheal smooth muscle is not konwn. The purpose of the present study is to determine the effect of Chunggeumtang on histamine and acetylcholine induced tracheal smooth muscle contraction in rats and guinea pigs. Guinea pig(500g, male) and Sprague Dawley rats (250g, male) were killed by $CO_2$ exposure and a segment (8-10mm) of the thoracic trachea from each rat and guinea pig was cut into equal swegments and mounted 'in pairs' in a tissue bath. Contractile force was measured with force diplacement transducers under 0.5g loading tension. The dose of histamine (His) and acetylcholine (Ach) which evoked 50% of maximal response ($ED_{50}$) was obtained from cumulative dose response curves for histamine and acetylcholine($10^{-7}{\sim}10^{-4}M$). Contractions evoked by His ($ED_{50}$) and Ach ($ED_{50}$) were inhibited significantly by Chunggeumtang. In guinea pig tracheal smooth muscle, the mean percent inhibition of acetylcholine induced contraction was $6.1%after\;30{\mu}l/ml$ Chunggeumtang, and 49.4% (p<0.01) after $100{\mu}l/ml$ Chunggeumtang. In rat tracheal smooth muscle, the mean percent inhibition of acetylcholine induced contraction was $6.7%\;after\;30{\mu}l/ml$ Chunggeumtang, and $54.2%\;(p<0.01)\;after\;100{\mu}l/ml$ Chunggeumtang. Also, in guinea pig tracheal smooth muscle, the mean percent inhibition of histamine induced contraction was $30.6%\;(p<0.05)\;after\;30{\mu}l/ml$ Chunggeumtang, and $53.0%\;(p<0.01)\;after\;100{\mu}l/ml$ Chunggeumtang. In rat tracheal smooth muscle, the mean percent inhibition of histamine induced contraction was $24.1%\;(p<0.05)\;after\;30{\mu}l/ml$ Chunggeumtang, and $55.3%\;(p<0.01)\;after\;100{\mu}l/ml$ Chunggeumtang. Propranolol and indomethacin($10^{-7}M$) slightly but significantly attenuated the inhibitory effects of Chunggeumtang. Following treatment with propranolol, the mean percent inhibition caused by $100{\mu}l/ml$ Chunggeumtang fell to 27.6% in guinea pig induced by acetylcholine contraction and by $100{\mu}l/ml$ Chunggeumtang fell to 28.7% (p<0.05) in rat induced by acetylcholine contraction and the mean percent inhibition caused by $100{\mu}l/ml$ Chunggeumtang fell to 16.2% in guinea pig induced by histamine contraction and by $100{\mu}l/ml$ Chunggeumtang fell to 28.7% (p<0.05) in rat induced by histamine contraction. Indomethacin, the mean percent inhibition caused by $100{\mu}l/ml$ Chunggeumtang fell to 20.0% in guinea pig induced by acetylcholine contraction and by $100{\mu}l/ml$ Chunggeumtang fell to 16.9% (p<0.05) in rat induced by acetylcholine contraction and the mean percent inhibition caused by $100{\mu}l/ml$ Chunggeumtang fell to 16.4% in guinea pig induced by histamine contraction and by $100{\mu}l/ml$ Chunggeumtang fell to 23.1% (p<0.05) in rat induced by histamine contraction. Methylene blue($10^{-7}M$) did not significantly alter the inhibitory effect of Chunggeumtang. Also, I could find the effects of Chunggeumtang and Chunggeumtanggamorphine on the tracheal smooth muscle in guinea pig and rat did not change significantly. These results indicate that Chunggeumtang can relax histamine and acetylcholine-induced contraction of guinea pig and rat tracheal smooth muscle, and that this inhibition involves sympathetic effects and the release of cyclooxygenase products.

• Restorative Dentistry and Endodontics
• /
• v.31 no.3
• /
• pp.147-152
• /
• 2006

The purpose of this study was to evaluate the influence of the AH-26 root canal sealer on the shear bond strength of composite resin to dentin. One hundred and forty four (144) extracted, sound human molars were used. After embedding in a cylindrical mold, the occlusal part of the anatomical crown was cut away and trimmed in order to create a flat dentin surface. The teeth were randomly divided into three groups; the AH-26 sealer was applied to the AH-26 group, and zinc-oxide eugenol (ZOE) paste was applied to the ZOE group. The dentin surface of the control group did not receive any sealer. A mount jig was placed against the surface of the teeth and the One-step dentin bonding agent was applied after acid etching. Charisma composite resin was packed into the mold and light cured. After polymerization, the alignment tube and mold were removed and the specimens were placed in distilled water at $37^{\circ}C$ for twenty four hours. The shear bond strength was measured by an Instron testing machine. The data for each group were subjected to one-way ANOVA and Tukey's studentized rank test so as to make comparisons between the groups. The AH-26 group and the control group showed significantly higher shear bond strength than the ZOE group (p<0.05). There were no significant differences between the AH-26 group and the control one (p>0.05). Under the conditions of this study, the AH-26 root canal sealer did not seem to affect the shear bond strength of the composite resin to dentin while the ZOE sealer did. Therefore, there may be no decrease in bond strength when the composite resin core is built up immediately after a canal filling with AH-26 as a root canal sealer.

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.2
• /
• pp.154-159
• /
• 1995

In order to find out the effects of shading and nitrogen fertilizer on $NO_3^-$ accumulation in the edible parts of chinese cabbage, Cutivar, "Seoul", was cultivated in the pots under glasshouse condition with different rates of shading(0, 15, 30, 50, 75%) and nitrogen fertilization(recommended level, and double rate of recommended level). Leaf length, leaf width, yield (leaf weight), root width and root weight in the 15% shading rate showed the highest value, but decreased in the over 30% shading rates. The highest yield showed in the plot of the 15% shading rate with double rate application of recommended N level. High rate of shading increased the $NO_3^-$ accumulation, especially in midrib and outer leaf compared to leaf blade and inner leaf, respectively. The average $NO_3^-$ accumulation of edible parts of chinese cabbage are $4,872mg\;kg^{-1}$(outer midrib), $2,363mg\;kg^{-1}$(inner midrib), $1,405mg\;kg^{-1}$(outer leaf blade) and $727mg\;kg^{-1}$(inner leaf blade). $NO_3^-$ accumulation of outer midrib in the plots of double application of recommended N level were no difference between shading rate containing $5,000{\sim}6,000mg\;kg^{-1}$ $NO_3^-$, while in the plots of recommended N level it was increased by elevating shading rate. It was concluded that overuse of nitrogen fertiliration for chinese cabbage in glasshouse condition might lead to increase $NO_3^-$ accumulation. It could be advisable to cut out both the out leaf blade and outer midrib which might accumulate the high concentration of $NO_3^-$ before consumption.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.3
• /
• pp.30-45
• /
• 2015

The purpose of this study is to demonstrate that transmissions of an intangible cultural heritage in Korea may be cut off because it is separated from human and social environment and protected and managed under the national system. In addition, another purpose is to criticize concept and method dichotomy in the current institution from an ecological perspective and consider the problem that the intangible cultural heritages are transmitted mainly by holders having skills and accomplishments by distinguishing them from others. Furthermore, the last purpose is to suggest a direction of policy emphasizing an importance of establishment of environment which allows nurture, change and development of local people, which may ensure continuous transmission in order to solve the problem and a transmission system of the intangible cultural heritage by using a principle in which the system is operated by self-recovery and natural rule of the ecology. The findings of this study show that seven problems can be analyzed by reviewing concept establishment and protection and transmission measure of intangible cultural heritages according to the Cultural Properties Protection Law, based on the ecological perspective. The protection and transmission methods of the intangible cultural heritage through the cultural heritage ecology are suggested by applying ecological theory to it. The intangible cultural heritage ecology defined in this paper means 'a sustainable community consisting of intangible cultural heritage, subject of activity and physical environment.' Since it is operated according to the principle reflecting the rules and features of natural ecology, it can keep system through self-recovery without an external intervention, as the case of natural ecology.

• The Journal of Korean Philosophical History
• /
• no.42
• /
• pp.197-232
• /
• 2014

Taoism is very political orientation from the start have. Internal alchemy has several factions, but southern school and northern school of taoism is typical of this. southern school begun from Zhang Bo-duan in north Song dynasty. Northern school is under Jin dynasty rule by Wang Chung-yang been established. Southern school did not create the platform, but northern school is developed mainly by the denomination from the first. Taoism is basically seek eternal life. Internal alchemy was created a unique discipline to reach the such stage with only Internal alchemy. Southern school's training methods were an elaborate series of logical structure with a counterpart, but northern school's methods is somewhat lacking logically. Southern school claim a training methods from the physical to mental through how to achieve it's ultimate goals, northern school took from mental to spiritual retreat methods that the way to achieve objectives. But northern school's theory of ascetic Practice is difficult to see that the contents are pure. Also, the labours of penance during his training process is the other way with Southern school. These differences are they closely associated with Confucianism and Buddhism, to understand the point of view. Southern school put a primary objective in the personal Practice, while northern school is fundamental to the relief of the people. This can see that has how long life times in southern school and northern school's main members. Because the members of southern school enjoyed great longevity, but northern school's main members was not enjoyed longevity. As a result, the southern school's flow is cut off and northern school became the center form a major organization in the history of china taoism. The southern school assimilated to the northern school. In a pure sense, host and guest's changed.

• Journal of the Korean earth science society
• /
• v.41 no.6
• /
• pp.557-574
• /
• 2020

The purpose of this study is to analyze the cause of high PM2.5 mass concentrations in Cheongju for the period of non-Asian dust days using the weather chart, the stream lines at 850 hPa, the backward trajectory, and the weather and air quality model. As a result of analyzing the time series of PM2.5 concentrations and weather charts for the episodic days in Cheongju, the weather patterns were shown in related to long-range transport of PM2.5 from China or surrounding areas. In fact, in the PM2.5 time series, 60-80 ㎍ m-3, which is more than 2-3 times higher than the concentration attributed to Cheongju activities, was observed as a background concentration related to long-range transport. The distribution of high PM2.5 concentration was typically dependent on the locations of the high and low pressures above the ground while the upper jet stream passed through the Korean Peninsula. Consequently, the high PM2.5 concentration in Cheongju is due to massive air pollutants in the form of smog originated from industrial, household and energy combustion sources of Beijing and other nearby regions of China. These air pollutants move along a fast zonal wind caused by the atmospheric pressure arrangement. high concentration of PM2.5 in Cheongju City is because the mass of air pollutants in the form of smog generated from industrial, household and energy combustion origins in Beijing or other nearby regions of China move along a fast wind speed zone according to the atmospheric pressure arrangement of long-distance transportation. Air pollutants including PM2.5 show an M-shaped pattern that passes through the topography of the Cheongju basin from north to south as a belt or band-shaped pollutant. The ground high pressure according to the above-ground high pressure expansion area and cut-off low or low pressure arrangement, or the bands in the form of river stems appear in a gradual incremental pattern that changes into a U-shape under the influence of the wind.

• Journal of Food Hygiene and Safety
• /
• v.39 no.1
• /
• pp.54-60
• /
• 2024

This study investigated the effectiveness of using pathogens and aqueous acids to reduce the Aspergillus ochraceus and Rhodotorula mucilaginosa contamination in livestock production environments. For this study, 1 mL of each bacterial suspension (10⁷-10⁸ spores/mL) was inoculated on a knife surface, dried at 37℃, and used under each treatment condition. First, to investigate the effect of organic acids, acetic, lactic, and citric acids were used. Subsequently, to select the appropriate concentration, they were prepared at concentrations of 0.5, 1, 2, 3, 4, and 5%, respectively. Accordingly, to further maximize the effect of organic acid treatment, we combined the treatment with ultraviolet light. The two strains showed a significant difference (P<0.05) compared to the initial strain, with a greater than 90% decrease in the concentrations of all organic acids. Consequently, acetic and lactic acids decreased by approximately 5 and 2 log colony forming unit (CFU)/cm², respectively, when treated with ultraviolet light (360 mJ/cm²); however, citric acid decreased by less than 1 log CFU/cm². However, when manufactured with 4% acetic acid, a severe malodor was emitted, making it difficult for workers to use it in a production environment. Accordingly, the optimal treatment conditions for organic acid and ultraviolet light for application were selected as follows: immersion in a 4% lactic acid solution for 1 minute and then, sterilization with ultraviolet light at 360 mJ/cm². Finally, when a pork meat sample was cut with a knife that was finally washed with lactic acid and treated with ultraviolet light, the low level of inoculum transferred from the cleaned knife to the surface of the sample was not detected. In conclusion, using this established method can prevent cross-contamination of the surface of the meat during processing.