• 제목/요약/키워드: Under-cut

검색결과 1,156건 처리시간 0.036초

레이저 형광 원리를 이용한 우식 진단 기기의 구치부 인접면 우식 진단 능력 비교 (Comparison of Diagnostic Validity between Laser Fluorescence Devices in Proximal Caries)

  • 이창근;이대우;김재곤;양연미
    • 대한소아치과학회지
    • /
    • 제45권4호
    • /
    • pp.426-435
    • /
    • 2018
  • 이 연구의 목적은 두 가지 형태의 레이저 형광원리를 이용한 우식 진단 기기(DD, DDpen)의 구치부 인접면 우식을 진단 하는 능력을 비교하고, 두 기기의 최적의 절단값을 확인하는 것이다. 이 연구에는 164개의 유구치 인접면과 438개의 영구치 구치부 인접면이 연구 대상에 포함되었다. 각 치면은 순서대로 두 가지 기기를 통한 검사를 시행하였고, 두 기기를 비교할 기준으로서 교익 방사선 사진 촬영을 시행하였다. 방사선 사진 촬영 결과는 우식의 깊이에 따라 유치열 3개의 군($pR_0$, $pR_1$, $pR_2$), 영구치열 4개의 군($PR_0$, $PR_1$, $PR_2$, $PR_3$)으로 분류하였다. 유치열에서 법랑질 우식과 상아질 우식의 AUC 값은 DD가 각각 0.851과 0.890으로 나타났고, DDpen은 각각 0.883과 0.917로 나타났다. 영구치열에서 법랑질 우식과 상아질 우식의 AUC 값은 DD가 각각 0.762과 0.886으로 나타났고, DDpen은 각각 0.828과 0.958로 나타났다. 유치열과 영구치열 모두 구치부 인접면 우식을 검사하는 데에는 DDpen이 DD보다 정확한 결과를 보였다. 하지만 유치열에 대해서는 DD도 인접면 우식 검사에 활용이 가능할 것으로 보인다.

사면보강용 Expanded Metal 격자크기에 따른 인발 특성 연구 (A Study on Protection Depending on Mesh Size of Expanded Metal for Slope Reinforcement)

  • 지영환;김기환;김성호;황영철;이승호
    • 한국지반환경공학회 논문집
    • /
    • 제11권12호
    • /
    • pp.47-56
    • /
    • 2010
  • 국가 차원 사회 간접자본 투자증가로 도로 개설 및 확장 등으로 인해 도로 절개비탈면의 증가가 필연적 현상으로 나타나고 있다. 도로 절개 비탈면이 증가됨에 따라 매년 많은 인명피해와 재산 피해가 발생되고 있으며 국내에서는 이러한 낙석 및 산사태로 인한 피해를 저감하고자 하는 취지에서 많은 연구가 수행되고 있다. 일반적으로 국내 도로사면의 대부분은 국토해양부에서 발간한 "도로안전시설 설치 및 관리지침"에 근거한 표준낙석방지시설을 사용하고 있으나 이러한 낙석방지시설이 실제 낙석 발생 시 큰 파손 없이 낙석을 방어할 수 있는 지에 대해서 많은 의문점들이 제기되고 있다. 또한 기술수준이 미약하여 전체적으로 해외 기술력에 의존하고 있으며, 낙석방지망의 경우 부분적 취약점(일체화가 되지 못함)으로 인해 충분한 지지능력을 발휘하지 못하고 망이 터지는 문제점 등이 발생됨에 따라 국내에서도 보다 높은 낙석 에너지를 지지할 수 있는 낙석방지망에 대한 연구가 필요할 것으로 판단된다. 이에 본 연구에서는 낙석방지망으로써의 적용가능한 Expanded Metal(3.2T)을 대상으로 낙석방지망 인발시험을 실시하여 망 크기에 따른 하중-변위 특성 및 파괴형태를 분석하여 Expanded Metal 낙석방지망의 경제적이고 합리적인 규격을 판단하는데 기초자료로 제공하고자 하였다.

아말감과 복합레진의 수복 과정과 수복 후 발생하는 상아세관액 흐름의 실시간 측정 (REAL-TIME MEASUREMENT OF DENTINAL TUBULAR FLUID FLOW DURING AND AFTER AMALGAM AND COMPOSITE RESTORATIONS)

  • 김선영;조병훈;백승호;임범순;이인복
    • Restorative Dentistry and Endodontics
    • /
    • 제34권6호
    • /
    • pp.467-476
    • /
    • 2009
  • 본 연구의 목적은 아말감과 복합레진의 수복 과정과 수복 후 상아세관액의 흐름(dentinal fluid flow, DFF)을 측정하기 위함이다. 치근을 절제한 제 3 대구치를 자체 제작한 미세 유체 흐름 측정장치에 연결한 후 1급 와동을 형성하여 아말감과 복합레진 수복을 시행하였다. DFF의 측정은 와동 형성부터 수복 후 30분까지 연속적으로 이루어졌고, 수복 후 3, 7일에 재 측정하였다. 주수 하에 와동 형성 시 DFF는 inward로, 끝난 후에는 outward로 바뀌었다. 아말감 충전 시 DFF는 inward로 바뀌었고 충전 완료 후 미약한 outward DFF를 보였다. 복합레진 수복의 경우, 산 처리 후 수세와 건조 시 각각 inward와 outward DFF를 보였고 primer도포 후 공기 분사는 급격한 outward, 소수성 본딩제를 적용하는 단계에서는 outward 였던 DFF가 감소하여 0에 가까워지거나 약간 inward 흐름을 보였다. 접착제와 복합레진의 광중합은 급격한 inward의 DFF를 일으켰다. 수복 후 30분, 3일, 7일째 수복 재료에 따른 DFF의 감소에 통계적으로 유의한 차이는 없었다 (p>0.05).

VoLTE 활성화에 따른 요금 인하 여력 분석 (Analysis of VoLTE Charge Reduction under VoLTE Growth)

  • 이상우;정선화
    • 한국통신학회논문지
    • /
    • 제41권1호
    • /
    • pp.92-100
    • /
    • 2016
  • VoLTE는 음성과 문자까지 IP 기반으로 서비스가 제공됨에 따라 기존 서킷방식의 2G/3G망 기반 음성서비스에 비해 기술 및 원가효율성이 높아 규모의 경제 효과가 클 뿐만 아니라, 음성과 데이터가 하나의 망으로 제공되기 때문에 범위의 경제 효과 또한 큰 것으로 알려져 있다. 이러한 기술적 효율성을 기초로 VoLTE 서비스가 기존 서킷방식의 음성서비스에 비해 원가적 측면에서 비용효율성이 얼마나 큰지 혹은 상대적으로 높은 원가효율성을 지니고 있는 VoLTE 서비스가 활성화될 경우 이에 따라 사업자들에게는 얼마만큼의 요금인하 여력을 제공할 수 있는지에 대한 연구는 전무한 상황이다. 본 논문에서는 기존 서킷방식의 음성서비스 대비 VoLTE 서비스의 상대적 원가효율성 규모를 분석하고, 이를 기초로 VoLTE 서비스 활성화 정도에 따른 음성서비스 요금 인하 여력이 얼마만큼 될 것인지를 계량적으로 분석하였다. 분석결과 첫째 음성통화량이 고정되어 있다는 가정하에 단기적으로는 VoLTE 서비스 제공을 위해 LTE망 구축 투자비 발생으로 인해 평균비용이 상승하나, VoLTE의 상대적 우수한 원가효율성에 따라 VoLTE 전환율이 높아질수록 음성서비스의 요금인하 여력이 발생되는 것으로 분석되었다. 둘째, 모든 음성통화량이 VoLTE로 전이될 경우 음성서비스 요금은 현재 요금 수준의 약 60%까지 인하될 여력이 존재하며, 이에 따라 데이터서비스 중심으로 과금하는 요금안의 정당성을 일부 확보할 수 있음을 증명하였다. 본 연구 결과를 통해 통신사업자에게는 요금전략 수립시 기초자료로 활용될 수 있으며, 정책적으로는 요금인하를 유도할 수 있는 정책자료로 활용될 수 있을 것으로 기대된다.

Mycoplasma 에 기인(起因)한 고구마 위축병(萎縮病)의 병태해부학적(病態解剖學的) 연구(硏究) (Study on the Plant Pathological Anatomy Associated with Mycoplasma Witches'-Broom Disease in Sweet Potato)

  • 소인영
    • Applied Microscopy
    • /
    • 제5권1호
    • /
    • pp.9-19
    • /
    • 1975
  • 고구마 위축병의 병원해부학적 변화상과 myco-plasma 병원상의 식물체내 이동 관계를 조사하여 경단분열조직에서의 조직학적 방어기작을 연구하고저 고구마 수원 147 호 (Ipomoea batatas (L.) Lamm. Suwon 147) 를 재료로 하여 광학 및 전자현미경으로서 조직관찰 및 무병주 생산을 위한 조직배양 실험을 하였다. Mycoplasma 의 감염경로의 조사를 위하여 나병주의 경단분열조직을 부위별로 조직배양을 하여서 mycoplasma의 상승한계를 측정하고 아울러 mycoplasma 의 세포내의 변화상과 이동상을 살핀 결과는 다음과 같다. 1. Mycoplasma 는 원시 및 제 l 기 분열조직을 포함한 경단에서는 존재하지 않음을 확인하였고 그 밑의 유관속 분화층에서는 존재하고 있으며 분화조직으로 갈수록 그의 크기가 커지고 미분화 조직에 갈수록 소형이며 미숙한 mycoplasma 가 존재함을 관찰하였다. 2. 경단분열조직속에 mycoplasma 가 존재하지 않는 것은 미숙 mycoplasma가 통과 할 수 있는 사역 및 원형질연락계와 같은 통과구조가 미분화되기 때문에 통과되지 못하는 것으로 인정된다. 3. 조직배양에서 경단 $1.0{\sim}1.5mm$ 부위를 배양하여 얻어진 식물은 이병되지 않았으며 경단 $2.0{\sim}3.0mm$ 부위의 것에서는 이병이 됨을 볼 수 있었다. 이것은 배양온도에서는 미숙한 mycoplasma 가 퇴화되며 소실된다는 사실을 알 수 있다.

  • PDF

부산광역시 해안 무인도서의 보전(保全)과 활용 (Preservation and Utilitization of Uninhabited Islets in Busan Metropolitan City)

  • 김항묵;유제우
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2009년도 공동학술대회
    • /
    • pp.475-486
    • /
    • 2009
  • 목도의 지질조사가 한국 역사상 이번에 처음으로 수행되었다. 목도가 중생대 말기 약$7,000{\sim}8,000$만년 전에 성층화산으로 분출하여 화산원형이 개석됨으로서 현재는 Planeze 단계를 지나 골격단계에 이른 것으로 밝혀졌다. 추후에 정밀조사를 한다면 분화구 자리도 찾아질 수 있을 것이다. 목도에는 50m고도에 해성단구면이 있다. 이는 제4단구면에 대비되고 홍적세 후기에 생성된 것으로 추정된다. 목도의 해안에 발달한 해안의 미지형으로는 해안단구, 해식애, 해식동, 파식대, 해안석주, 낭식장, 타포니(풍화혈) 등이 발견되었다. 목도는 산경도(山徑圖)에 표시되어 있는 낙동정맥의 남방 연장선 위 몰운대 앞바다에 위치하며 "물에 뜬 거북이"형국(부해금귀형(浮海金龜形)) 혹은 "물에서 나오고 있는 거북이"형국(출수금귀형(出水金龜形))이다. 목도의 도서명은 그 정체성을 위하여 "유구도"(游龜島) "남구도"(南龜島) "회구도"(廻龜島)중에서 선택하여 개칭할 필요가 있다. 목도는 부산의 관광수요를 위한 새로운 관광명소로 발전, 개발되는데 필요한 관광자연배경을 충분히 가지고 있으며, 앞으로 이 무인도서가 분산의 등대섬, 그리고 유,무인도서라 연계하여 해양관광을 개발한다면 새로운 관광지로서 행양수도발전에 지대한 영향력을 가질 수 있다고 평가되었다. 목도의 주변해역에 해양수족관과 해초정원을 조성하고 수목원을 조성하며 기타 해양문화공간조성의 종합기본계획이 이 연구에서 완성되었다.

  • PDF

인공타액에서 수종 아말감의 부식시 용해성분 및 표면 부식 생성물에 관한 실험적 연구 (EXPERIMENTAL STUDY ON THE DISSOLUTION COMPONENTS AND CORROSION PRODUCTS OF SEVERAL AMALGAMS IN ARTIFICIAL SALIVA)

  • 조승주;이명종
    • Restorative Dentistry and Endodontics
    • /
    • 제19권1호
    • /
    • pp.1-26
    • /
    • 1994
  • The purpose of this study was to investigate the dissolution components during corrosion of amalgams and to identify surface corrosion products in the modified Fusayama artificial saliva. Four type of amalgam alloys were used: low copper lathe cut amalgam alloy (Cavex 68), low copper spherical amalgam alloy (Caulk Spherical Alloy), high copper admixed amalgam alloy (Dispersalloy) and high copper single composition amalgam alloy (Tytin). Each amalgam alloy and Hg were triturated according to the manufacturer's direction by means of mechanical amalgamator (Capmaster, S.S.White), and then the triturated mass was inserted into the cylindrical metal mold which was 10mm in diameter and 2.0mm in height and condensed with compression of 150kg/$cm^2$ using oil pressor. The specimens were removed from the mold and stored at room temperature for 7 days and cleansed with distiled water for 30 minutes in an ultrasonic cleaner. The specimens were immersed in the modified Fusayama artificial saliva for the periods of 1 month, 3 months and 6 months. The amounts of Hg, Cu, Sn and Zn dissolved from each amalgam specimen immersed in the artificial saliva for the periods of 1 month, 3 months and 6 months were measured using Inductivity Coupled Plasma Atomic Emission Spectrometry (ICPQ-1000, Shimadzu, Japan) and amount of Ag dissolved from amalgam specimen was measured using Atomic Absorption Spectrophotometry (Atomic Absorption/Flame emission spectrophotometer M-670, Shimadzu, Japan). A surface corrosion products of specimens were analysed using Electron Spectroscopy Chemical Analyser (ESCA PHI-558, PERKIN ELMER, U.S.A.). The secondary image and back scattered image of corroded surface of specimens was observed under the SEM, and the corroded surface of specimens was analysed with the EDX. The following results were obtained. 1. The dissolution amount of Cu was the most in high copper admixed amalgam(Dispersalloy) and the least in high copper single composition amalgam(Tytin). 2. Sn and Zn were dissolved during all the experiment periods, and dissolution amounts were decreased as the time elapsed. 3. Initial surface corrosion products were ZnO and SnO. 4. Corrosion of ${\gamma}$ and ${\gamma}_2$ phase in low copper amalgams was observed and Ag-Cu eutectic alloy phase was corroded in low copper spherical amalgam(Caulk Sperical Alloy). 5. Corrosion of ${\gamma}$ and $\eta$' phase in high copper amalgams was observed and Ag-Cu eutectic alloy phase was corroded in high copper admixed amalgam(Dispersalloy). 6. Sn-Cl was produced in the subsurface of low copper amalgams and high copper admixed amalgam.

  • PDF

후두부에 발생한 유피낭종의 특징 (Characteristics of Dermoid Cyst of the Occipital Area)

  • 최환준;탁민성;최창용;강상규;이영만
    • Archives of Plastic Surgery
    • /
    • 제37권4호
    • /
    • pp.481-484
    • /
    • 2010
  • Purpose: Congenital dermoid cysts develop during the fusion of the embryo when the ectodermal tissue gets trapped in the line of fusion. Dermoid cysts of the head are rare lesions comprised of epidermal and mesodermal elements. Furthermore, dermoid cysts in the occipital area are extremely rare. Only a few cases of dermoid cysts in the posterior scalp have been reported. Especially, A bilateral, synchronous presentation in this location has not been reported previously in the literature. Methods: All 5 cases had a gradually enlarging mass of the posterior aspect of the scalp. The cysts were mobile, noncompressible, and non-tender, without evidence of an associated sinus tract, skin dimpling, discoloration, or communication with adjacent structures. The CT scan displayed a hypodense cystic lesions about -87 to +24 HU (Housefield units, average +3.2 HU) with hypodense capsule and no postcontrast enhancement. All tumors were found just under the skin, and were well encapsulated, so they were completely removed the mass with adjacent periosteum. Results: On gross findings, all tumors were oval-or round-shaped, and when the cystic tumor was cut open it presented a greasy and caseous substance. Histologically, all specimens contain desquamated squamous epithelium and keratin in the lumen and are encapsulated and lined by keratinized stratified squamous epithelium. And, all cases of posterior mass are the presence of adnexal structures. Conclusion: Appropriate diagnosis requires not only an index of suspicion for this rare tumor a very careful history and search for skin changes. Especially, CT can reveal the exact location of the cyst, its relationship with the adjacent structures. We think that occipital dermoids divide into superficial and deep type. In our cases, because they did not have intra-cranial involvement or fistula formation, they are superficial type. This report describes the clinical and operative aspects of the superficial dermoid cysts and provides a review of the literatures.

소성변형과의 상관성 및 추정모델을 통한 변형강도 시험장치 변수 분석 (Analysis of Apparatus Variables for Deformation Strength Test of Asphalt Concrete Based on Correlation with Rutting and Prediction Model for Rutting)

  • 김광우;이문섭;김성태;이순제
    • 한국도로학회논문집
    • /
    • 제4권4호
    • /
    • pp.41-52
    • /
    • 2002
  • 본 연구는 아스팔트 콘크리트 포장의 소성변형 추정을 보다 쉽게 하기 위하여 새로운 시험기법인 김테스트의 변형강도 및 시험 장비를 개발함에 있어 적정규격을 선정하기 위한 것이나. 김테스트에서 하중봉의 직경(D) 및 하중봉 하단의 원형처리 반경(r)이 시험결과에 미치는 영향을 파악하기 위하여 다양한 혼합물에 대하여 D와 r을 변화시켜가며 실험을 수행하였다. r에 따른 변형강도 및 변형하중과의 상관관계 분석결과 r=0.5와 1.0cm로 원형 처리한 측정값에서 소성변형과 높은 상관성을 보여주었다. 공시체의 직경(S)은 중요 변인이 아니었으며, 하중봉은 직경 4cm에 반드시 하단을 원형처리를 해야하고 이때의 절삭 반경 r은 1.0cm가 가장 좋은 것으로 나타났다. 통계프로그램 SAS의 STEPWISE 를 이용하여 골재별로 변형강도로부터 소성변형 깊이 및 동적 안정도를 추정하기 위해 모델을 개발하였으며 $R^2$은 0.95이상이 얻어졌다. 향후 보다 많은 실험을 통해 이 시험법의 표준화 연구가 지속적으로 이루어져야 할 것이며, 새로운 배합설계 방법을 개발한다면 본 실험법의 적용을 검토해 볼 필요가 있을 것이다.

  • PDF

N-Terminal Pro-B-type Natriuretic Peptide Is Useful to Predict Cardiac Complications Following Lung Resection Surgery

  • Lee, Chang-Young;Bae, Mi-Kyung;Lee, Jin-Gu;Kim, Kwan-Wook;Park, In-Kyu;Chung, Kyung-Young
    • Journal of Chest Surgery
    • /
    • 제44권1호
    • /
    • pp.44-50
    • /
    • 2011
  • Background: Cardiovascular complications are major causes of morbidity and mortality following non-cardiac thoracic operations. Recent studies have demonstrated that elevation of N-Terminal Pro-B-type natriuretic peptide (NT-proBNP) levels can predict cardiac complications following non-cardiac major surgery as well as cardiac surgery. However, there is little information on the correlation between lung resection surgery and NT-proBNP levels. We evaluated the role of NT-proBNP as a potential marker for the risk stratification of cardiac complications following lung resection surgery. Material and Methods: Prospectively collected data of 98 patients, who underwent elective lung resection from August 2007 to February 2008, were analyzed. Postoperative adverse cardiac events were categorized as myocardial injury, ECG evidence of ischemia or arrhythmia, heart failure, or cardiac death. Results: Postoperative cardiac complications were documented in 9 patients (9/98, 9.2%): Atrial fibrillation in 3, ECG-evidenced ischemia in 2 and heart failure in 4. Preoperative median NT-proBNP levels was significantly higher in patients who developed postoperative cardiac complications than in the rest (200.2 ng/L versus 45.0 ng/L, p=0.009). NT-proBNP levels predicted adverse cardiac events with an area under the receiver operating characteristic curve of 0.76 [95% confidence interval (CI) 0.545~0.988, p=0.01]. A preoperative NT-proBNP value of 160 ng/L was found to be the best cut-off value for detecting postoperative cardiac complication with a positive predictive value of 0.857 and a negative predictive value of 0.978. Other factors related to cardiac complications by univariate analysis were a higher American Society of Anesthesiologists grade, a higher NYHA functional class and a history of hypertension. In multivariate analysis, however, high preoperative NT-proBNP level (>160 ng/L) only remained significant. Conclusion: An elevated preoperative NT-proBNP level is identified as an independent predictor of cardiac complications following lung resection surgery.