• 동력기계공학회지
• /
• 제10권1호
• /
• pp.46-51
• /
• 2006

Present study was investigated the effect of the particle of the counterface of unidirectional carbon fiber reinforced composite. The friction coefficient of composite and the specific wear rate different sliding velocity were measured for this materials. The friction track of counterface was observed by an optical microscope and scanning electron microscope. There were insignificant effects of the specific wear rate under lower Sic abrasive particle, however it showed high effect on $30{\mu}m$ abrasive particle size. There were significant effects of friction and wear behavior of the fiber direction under 0.3m/s sliding speed. Major failure mechanisms can be classified such as microfracture, plowing, microcutting, cutting and cracking.

• Applied Microscopy
• /
• 제24권4호
• /
• pp.98-106
• /
• 1994

The corneal formation of compound eye of Pieris rapae L., which was mostly made during pupal stage, was morphologically investigated with light microscope, scanning electron microscope and transmission electron microscope. The regeneration of the microvilli were found on the surface membranes of corneagen cells and retinular pigment cells of preommatidium after apolysis pupal cuticle. The microvilli were finally differentiated to corneal nipples of the ommatidium. The corneal cuticle was generated on the superficial layer of the preommatidium from corneagen cells and retinular pigment cells. The corneal process was also formed under the cuticular layer from the corneagen cells. The pore canal was appeared within the cuticular layer and connected with the retinular pigment cell as if the root of interommatidial hair was connected. The interommatidial hair was projected randomly among the ommatidial facets and cornal nipple was arrayed regular on the ommatidial facets. The cornea was convex lens and the refracting power by its convex shape was 4 diopter.

• 대한기계학회논문집A
• /
• 제26권6호
• /
• pp.1159-1168
• /
• 2002

Power-transmission Nylon pinions against steel gears fur different pitch line velocities was studied with a power circulating gear test rig under unlubricated condition by SEM(Scanning Electron Microscope). The wear characteristics of Nylon pinions varied significantly with the pitch line velocity and applied load. Wear occurred most severely at the regions including pitch circle and root circle of Nylon pinions. It is confirmed that Nylon pinions are able to be used fer power-transmission under limited conditions.

• 대한한의학회지
• /
• 제20권3호
• /
• pp.27-35
• /
• 1999

The purpose of this study was to investigate the histochemical effect of Jojoongikgi-tang (JIT) on hairless mice induced by DNCB. For the study, DNCB was applied on the infrascapular region of the mices skin and then JIT was orally administered. As a result, the following histochemical changes of the dermis were observed through light and electron microscopes, and statistical data. The results obtained were as follows: 1. In the 2 days experimental group, more histamine mast cells dermis occurred than in the control or normal group when observed under light microscope. When an electron microscope was used, histochemical reactive cells in the dermis were found as mast cells that contained more cytoplasmic granules than in the control or normal group. 2. In the 5 days experimental group, the number of mast cells were decreased over the control or normal group when observed under light microscope. When an electron microscope was used, mast cells in the control contained secretory granules with higher electron density than those of the experimental group. 3. As a result of statistical analysis, the mean value of mast cells in the normal 2 days control and experimental groups was not significantly different (p<0.05). 4. However, the mean values of it in the normal ($19.1000{\pm}6.3154$), 5 day control ($103.4500{\pm}42.2704$) and 5 day experimental groups ($35.9500{\pm}8.5746$) were significantly different (p<0.05). From the above results, it is concluded that JIT is efficient against the purpura induced by DNCB.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.355-356
• /
• 2006

WC-TiC-TaC binderless cemented carbide was oxidized under low partial pressure of oxygen (50ppm) at 873K for 1 to 20 h. Surface roughness was measured using atomic force microscope, and effect of TiC amount on oxidation behavior of the carbide was investigated. WC phase was oxidized more easily than WC-TiC-TaC solid solution phase. With an increase in TiC amount, WC-TiC-TaC phase increased and the oxidation resistance of the carbide increased.

• Journal of the Optical Society of Korea
• /
• 제12권3호
• /
• pp.170-173
• /
• 2008

In this study, we simulated a statistical model of FCS(fluorescence correlation spectroscopy) based on a Poisson process to understand and explain observations of the experiment performed on molecules of ultra-low concentration by the home-built laser-scanning confocal microscope. The statistical model confirmed that the relative mean square amplitude of fluctuations is shown to be inversely proportional to the average number of molecules, even in the ultra-low concentration, if some conditions are satisfied. Signal-to-noise ratio and the variability of dwelling time under the confocal volume were found to be effective conditions for the experiment.

• 한국전기전자재료학회논문지
• /
• 제17권8호
• /
• pp.812-822
• /
• 2004

This paper shows that carbon nanotubes can be applied to a nanopipette. Nano space in atomic force microscope multi-wall carbon nanotube tips is filled with molecules and atoms with charges and then, the tips can be applied to nanopipette when the encapsulated media flow off under applying electrostatic forces. Since the nano space inside the tips can be refilled, the tips can be permanently used in ideal conditions of no chemical reaction and no mechanical deformation. Molecular dynamics simulations for nanopipette applications demonstrated the possibility of nano-lithography or single-metallofullerene-transistor array fabrication.

• 대한두경부종양학회:학술대회논문집
• /
• 대한두경부종양학회 2005년도 제22차 추계학술대회
• /
• pp.233-233
• /
• 2005

• 치과방사선
• /
• 제18권1호
• /
• pp.177-187
• /
• 1988

This study was designed to investigate the effects of split irradiation on the salivary ductal cells, especially on the intercalated cells of the rat parotid glands. For this study, 24 Sprague-Dawley strain rats were irradiated on the head and neck region with two equal split doses of 9Gy for a 4 hours interval by Co-60 teletherapy unit, Picker's model 4M 60. The conditions of irradiation were that field size, dose rate, SSD and depth were 12×5㎝, 222 cGy/min, 50㎝ and 1㎝, respectively. The experimental animals were sacrificed 1. 2, 3, 6, 12, hours and 1, 3, 7, days after the irradiation and the changes of the irradiated intercalated cells of the parotid glands were examined under light and electron microscope. The results were as follows: 1. By the split irradiation, the degenerative changes of intercalated cells of the parotid glands appeared at 3 hours after irradiation and the most severe cellular degeneration observed at 6 hours after irradiation. The repair processes began from 12 hours after irradiation and have matured progressively. 2. Under electron microscope, loss of nuclear membrane, microvilli and secretory granules, derrangement of chromosomes, degeneration of cytoplasm, atrophy or reduction of intracytoplasmic organelles were observed in the intercalated ductal cells after split irradiation. 3. Under light microscope, derrangement of ductal cells, widening of cytoplasms and nuclei, hyperchromatism and proliferation of ductal cells were observed in intercalated ducts after split irradiation.

• 지질공학
• /
• 제29권3호
• /
• pp.237-249
• /
• 2019

본 연구에서는 지하수의 이동에 영향을 주는 암반의 균열에 대해서 고온하에서의 다단계 압력실험을 통해 균열면의 거칠기 변화에 대한 분석을 실시하였다. 연구에 사용된 시료는 지표에서 지하 500 m 구간에서 획득한 조립질 화성암과 세립질 화성암 시료 중 심도 약 40 m와 270 m의 시료를 실험에 사용하였다. 압력은 최대 120 MPa 까지 가압을 하였으며, 단계적으로 10 MPa씩 증가하면서 실험을 수행하였다. 각 단계에서의 표면 변화를 관측하기 위해서 고분해능 3차원 다초점 레이저 스캔 현미경(Confocal Laser Scanning Microscope, CLSM)을 사용하였으며, 이를 통해서 미세한 표면의 거칠기를 확인할 수 있었다. 거칠기의 변화에 대해서는 거칠기 인자값을 기준으로 변화된 양을 계산하였다. 본 실험에 사용된 시료는 $20{\times}40{\times}5mm$ 크기를 가지고 있으며, 가압장치는 나사방식으로 압력을 가할 수 있도록 제작한 챔버를 활용하여 실험을 수행하였다. 실험결과 단계적으로 압력이 가해지는 조건에서 압력에 따른 균열면의 거칠기는 입자의 크기에 따라 다른 변화를 보이는 것으로 확인되었으며, 이러한 자료는 추후 암석의 균열면을 따라 이동할 수 있는 지하수의 흐름에 대한 예측을 위한 기초자료로 활용 될 수 있을 것으로 기대한다.