• 한국환경농학회지
• /
• 제23권4호
• /
• pp.245-250
• /
• 2004

An analytical method was developed to determine monocrotophos residues in apple, citrus, and soil using high-performance liquid chromatography (HPLC) with ultraviolet absorption detection. Monocrotophos was extracted with acetone from apple, citrus and moist soil samples. The extract was concentrated, added with saline water, and subjected to n-hexane washing to remove nonpolar co-extractives. Dichloromethane partition was then followed to recover monocrotophos from the aqueous phase. Silica gel column chromatography was employed to further purify the extract prior to HPLC determination. Reverse-phase HPLC using an oct-adecylsilyl column was successfully applied to separate and quantitate the monocrotophos residue in sample extracts at the wavelength of 230 nm. Overall recoveries of monocrotophos from fortified samples averaged $95.3{\pm}2.1%$ (n=6), $970{\pm}0.7%$ (n=6), and $92.8{\pm}4.3%$ (n=12) for apple, citrus, and soil, respectively. The proposed method was quite reproducible and sensitive enough to replace the troublesome gas-liquid chromatographic analysis for monocrotophos residues.

• 미생물학회지
• /
• 제18권4호
• /
• pp.155-160
• /
• 1980

Microorgansims utilizing anionic detergent as their carbon and sulfur sources were isolated from soils and sewages. Alkyl benzene sulfonate (Hiti) and sodium dodecyl sulfonate (SDS) were the detergent compound tested. Three of these isolated microorganisms were identified as Pseudomonas spp. and the others asKlbsiella, Enterobacter and Acinetobacter. Biodegradation rate of the detergents and growth rate of Acinetobacter Strain II-8, Pseudomonas strain H-3-1 and 554 among six isolated microorganisms were investigated with colorimetric, warburg manometric, and ultraviolet absorption analyses. By performance of 4 serial successive tranfer to new culture broth for the purpose of adaptation method, ABS and SDS could be degraded to far more than 40%-60% and 70%-75%, respectively. However the employment of nonadaptation method, ABS and SDS were degraded to 30%-45% and 45%-65%, respectively. In another words, detergents degradation ability was increased to a certain extent by successive transfer to the new minimal media. We would conclude that the development of adaptation was effective in the removal of recalcitrant compounds.

• 한국도로학회논문집
• /
• 제16권2호
• /
• pp.35-41
• /
• 2014

PURPOSES : Surface treatment is a favorable method in the pavement preventive maintenance. This study (Part I) aimed to develop the low viscosity filling material for waterproof characteristics and high penetrable and weather resistance, and a series of companion study (Part II) presents the coating characteristics and performance analysis using field and lab tests. METHODS : Hydrophobic characteristics of the advanced surface treatment material are observed and measured the filling depth and the permeability for sand and asphalt pavement specimen using the water absorption test and permeability test, X-RAY CT test. Color difference for the weather resistance using ultraviolet ray accelerated weathering test is compared with asphalt pavement specimens. RESULTS : The developed material shows the decreased water absorption and increased impermeable effect because of the hydrophobic characteristics. It is found that the filling depth is about 6mm and weather resistance is better than asphalt pavement specimen. CONCLUSIONS : The advanced hydrophobic - low viscosity filling treatment material is developed in this study (Part I) to improve the waterproof characteristics and high filling capacity and weather resistance for the pavement preventive maintenance.

• 공업화학
• /
• 제27권6호
• /
• pp.669-671
• /
• 2016

본 연구에서는 수열합성법을 이용하여 수산화인회석을 합성하였다. 또한 이온 교환 반응을 통하여 수산화인회석 표면에 은을 도입하였다. 합성된 샘플의 결정성과 형태를 X-선 회절 분석과 투과전자현미경을 통하여 분석하였으며, 산란 반사 UV-vis 스펙트럼을 통하여 합성한 샘플의 광학적 특성을 조사하였다. 은이 도핑된 수산화인회석의 경우 은이 수산화인회석 표면에 나노입자 형태로 존재한다는 것을 X-선 회절 분석과 투과전자현미경 실험으로 확인하였다. 특히 수산화인회석과 비교하여 은 나노 입자가 도입된 수산화인회석의 경우에는 UV-Vis 영역에서 높은 흡광도를 나타내었다.

• 대한화장품학회지
• /
• 제28권1호
• /
• pp.214-224
• /
• 2002

High concentrated $TiO_2$ nano colloids were synthesized by sol-gel method. Reactions were performed in $TiCl_4$/HCl/$H_2O$ aqueous solution and the conditions of particles such as shape, size and aggregation, etc. were controlled by polymerization and adsorption of acrylamide in surface of $TiO_2$ nano particles. And also, aminopropyltriethoxysilane was added instead of acrylamide and compared each other. The prepared colloids were well dispersed and showed the strong absorption peaks at 350nm-370nm which is blue shifted to 20-30nm, compared to macro particles. The obtained techniques from $TiO_2$ nato colloids synthesis were utilized in coating on boron nitride powders which are nonpolar and isoelectronic materials of carbon. Their surface morphology, structure, thermal stability and U. V absorption chracteristics were examined by SEM(Scanning Electron Microscopy), XRD(X-ray diffraction), TG/DTA(Thermogravimetric and Differential Thermal Analysis), UV-VIS(Ultraviolet-Visible Spectroscopy).

• 한국세라믹학회지
• /
• 제47권4호
• /
• pp.329-332
• /
• 2010

In order to investigate the effect of tail state on the electrical and the optical properties in amorphous IGZO(a-IGZO), a-IGZO films were deposited at room temperature on fused silica substrats using pulsed laser deposition method. The laser pulse energy was used as the processing parameter. In-situ post annealing was carried out at $150^{\circ}C$ right after the film deposition. The $O_2$ partial pressure during the deposition and the post annealing was fixed to 10mTorr. The carrier mobility of the a-IGZO films had a range from 2 to $18\;cm^2/Vs$ at carrier concentrations greater than $10^{18}\;cm^{-3}$. As the laser energy density increased, the Hall mobility increased. And post annealing improved the Hall mobility, as well. The optical property was examined using the ultraviolet-visible spectroscopy. The a-IGZO films that have low Hall mobility exhibited stronger and broader absorption tails in >3.0 eV region. Post annealing reduced the intensity of the tail-like absorption. The absorption tail in a-IGZO films is an important factor which affects the electrical and the optical properties.

• 대한환경공학회지
• /
• 제34권11호
• /
• pp.743-750
• /
• 2012

$ClO_{2(aq)}$ 분석 방법 중 하나인 UV 흡수법은 여러 염소종이 함유된 용액에서는 흡수 파장 겹침 현상으로 분석에 어려움이 있다. 이러한 문제를 극복하고자 UV 파장 분해법을 이용한 다양한 염소종이 함유된 용액의 $ClO_{2(aq)}$ 농도 정량법을 제안하였다. UV 파장 분해법을 이용한 $ClO_{2(aq)}$ 농도 값은 적정법을 이용한 $ClO_{2(aq)}$ 농도 값과 10%내에서 일치하였다. 따라서 다양한 염소 종들이 포함된 시료에서도 제안된 UV 파장 분해법을 적용한다면 $ClO_{2(aq)}$의 선택적 분석이 가능하다는 것을 알 수 있었다.

• Asian Journal of Atmospheric Environment
• /
• 제11권2호
• /
• pp.96-106
• /
• 2017

In this study, measurements of size-segregated particulate matter (PM) emitted from the combustion of rice straw, pine needles, and sesame stem were conducted in a laboratory chamber. The collected samples were used to analyze amounts of organic and elemental carbon (OC and EC), water-soluble organic carbon (WSOC), humic-like substances (HULIS), and ionic species. The light absorption properties of size-resolved water extracts were measured using ultraviolet-visible spectroscopy. A solid-phase extraction method was first used to separate the size-resolved HULIS fraction, which was then quantified by a total organic carbon analyzer. The results show that regardless of particle cut sizes, the contributions of size-resolved HULIS ($=1.94{\times}HULIS-C$) to PM size fractions ($PM_{0.32}$, $PM_{0.55}$, $PM_{1.0}$, and $PM_{1.8}$) were similar, accounting for 25.2-27.6, 15.2-22.4 and 28.2-28.7% for rice straw, pine needle, and sesame stem smoke samples, respectively. The $PM_{1.8}$ fraction revealed WSOC/OC and HULIS-C/WSOC ratios of 0.51 and 0.60, 0.44 and 0.40, and 0.50 and 0.60 for the rice straw, pine needle, and sesame stem burning emissions, respectively. Strong absorption with decreasing wavelength was found by the water extracts from size-resolved biomass burning aerosols. The absorption ${\AA}ngstr{\ddot{o}}m $ exponent values of the size-resolved water extracts fitted between 300 and 400 nm wavelengths for particle sizes of $0.32-1.0{\mu}m$ were 6.6-7.7 for the rice straw burning samples, and 7.5-8.0 for the sesame stem burning samples. The average mass absorption efficiencies of size-resolved WSOC and HULIS-C at 365 nm were 1.09 (range: 0.89-1.61) and 1.82 (range: 1.33-2.06) $m^2/g{\cdot}C$ for rice straw smoke aerosols, and 1.13 (range: 0.85-1.52) and 1.83 (range: 1.44-2.05) $m^2/g{\cdot}C$ for sesame stem smoke aerosols, respectively. The light absorption of size-resolved water extracts measured at 365 nm showed strong correlations with WSOC and HULIS-C concentrations ($R^2=0.89-0.93$), indicating significant contribution of HULIS component from biomass burning emissions to the light absorption of ambient aerosols.

• 한국물환경학회지
• /
• 제26권4호
• /
• pp.707-712
• /
• 2010

Nitrogen-doped $TiO_2$ particles have been successfully prepared using titanium tetraisopropoxide as the Ti source and urea as the nitrogen source. As-prepared nitrogen-doped $TiO_2$ was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer-Emmett-Teller method (BET) and ultraviolet-visible light (UV-vis) absorption spectra techniques. Photocatalytic degradation of Methylene Blue (MB) has been carried out in both solar light (UV-vis) and the visible region (${\lambda}=420nm$). Nitrogen-doped $TiO_2$ exhibits higher activity than the commercial $TiO_2$ photocalyst, particularly under visible-light irradiation because bandgap of nitrogen-doped $TiO_2$ becomes remarkably decreased.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.90-90
• /
• 2010

We investigated the modification of optical response properties of titanium dioxide (TiO2) coatings on the ceramic water-purification filters by using ultraviolet-visible absorption spectroscopy and X-ray diffraction. The TiO2 coatings were prepared on ceramic substrate by e-beam evaporation method. These amorphous TiO2 were turned into anatase phase by heat treatment at $700^{\circ}C$ for 2 hours. The doping of N atoms into the TiO2 coatings was done by using 70KeV of N＋ ion implantation with the dose of $1.0{\times}1017$ ions/cm2, followed by post-irradiation heat treatment at $550^{\circ}C$ for 2 hours. Methylene blue test of TiO2 coatings to solar irradiation showed that the post-evaporation heated TiO2 was photocatalytic and N-doped TiO2 reacted to the visible part of solar irradiation.