• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2002년도 춘계학술발표회 초록집
• /
• pp.39-39
• /
• 2002

In order to improve wear and fatigue resistance of the structural materials, especially cold work roller for 304 stainless steel, an eco-super-finishing and surface hardening treatment using ultrasonic vibration energy was developed and applied to the SKD-ll roller. The eco-super-finishing machine was designed and fabricated by DesignMecha Co, by its own technology. It was observed that the surface roughness, hardness and residual stress were changed from $Ra{\;}={\;}O.25\mu\textrm{m}$, Hv=710 and ${\sigma}$={\;}+400{\;}MPa{\;}to{\;}Ra{\;}={\;}0.165\mu\textrm{m}$, Hv = 1200 and ${\sigma}=-610$ MPa after 20 KHz micro-cold forging, which means almost equal to the 300 % improvement of life-time.

• 풍력에너지저널
• /
• 제9권4호
• /
• pp.9-15
• /
• 2018

In a previous study, a technique for measuring wind speed and direction by using a roll-rotating three-axis ultrasonic anemometer was proposed and verified by wind tunnel tests. In the tests, instead of a roll sensor, roll angle was trimmed to make no up flow in the transformed wind speeds. Verification was done in point of the residual error of the rotation effect treatment. In this study, roll angle was measured from the roll motor encoder and the transformed wind speed and direction on the test section axis were compared with the ones provided to the test section. As a result, up to yaw $20^{\circ}$ at a wind speed of 12 m/sec or over, the RMS error of wind speed was within the double of the ultrasonic anemometer error. But at yaw $30^{\circ}$, it was over the double of the ultrasonic anemometer error. Regardless of wind speed, at yaw $20^{\circ}$ and $30^{\circ}$, the direction error was within the double of the ultrasonic anemometer error. But at yaw $10^{\circ}$ or less, it was within the error of the ultrasonic anemometer itself. This is a very favorable characteristic to be used for wind turbine yaw control.

• 한국방사선학회논문지
• /
• 제11권5호
• /
• pp.353-359
• /
• 2017

대표적인 저강도 초음파 자극 기술인 음파영동은 초음파의 물리적 진동과 온열 효과를 이용하여 약물을 인체 표피 내부로 전달시키는 기법이다. 음파영동법은 치료 약물 전달의 효율을 높일 수 있으며, 인슐린이나 지질 등 분자 크기가 비교적 큰 약물의 전달에도 효과적이라는 장점을 갖는다. 본 연구에서는 효율적인 음파영동 치료를 위하여 대면적 단일 진동소자와 치료 부위에 약물 이송 기능을 갖는 복합 구조 초음파 변환기 어셈블리를 제안하였다. 또한, 치료 부위의 온도를 상승 및 유지시킬 수 있는 변환기 어셈블리 구조를 제안하고 유효성을 평가하였다. 본 연구에서 제안된 변환기 어셈블리는 지속적으로 정량의 약물을 제공하고, 가온을 통하여 약물 전달을 보조함으로써 초음파를 이용한 음파영동 시술의 효율을 향상시킬 수 있을 것으로 사료된다.

• 전기화학회지
• /
• 제2권2호
• /
• pp.61-65
• /
• 1999

리튬이차전지용 양극물질로서 $LiV_3O_8$의 새로운 합성방법이 그 전기화학적 거동을 향상시키는 것으로 제안되고 있다. $LiV_3O_8$을 수용성 lithium trivanadate 겔의 탈수에 의해 잘 분산된 형태로 얻어진다. $LiV_3O_8$의 초음파처리방법은 solutionmethod에 의해 만들어진 초기상태의 $LiV_3O_8$과 비교된다. 수용액상에서 초음파처리 된 물질은 XRD, TGA, SEM등으로 물리적특성을 확인하였다. 이런 방법들은 수용성 $LiV_3O_8$의 초음파처리공정이 결정성을 감소시키고 비표면적과 공간용량을 향상시키는 것으로 나타났다. 특히 2시간 동안 초음파처리한 것은 높은 방전용량을 가지며, 대용량의 손실없이 충방전사이클이 이루어졌다. 따라서, 초음파처리 된 $LiV_3O_8$은 공간용량을 향상시킬 뿐만 아니라 사이클거동 역시 향상되었다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권10호
• /
• pp.5949-5952
• /
• 2013

Objectives: To compare the clinicalpathological features and prognosis between premenopausal breast cancer patients aged of <35 and ${\geq}35$ years old. Methods: The clinical data and survival status of 1498 cases premenopausal operable breast cancer treated in our hospital from 2002.1 to 2004. 12 were collected, 118 cases were aged <35. They were divided into 4 groups: Luminal A, Luminal B, HER2-positive, Triple-negative. The disease free survival (DFS) and overall survival (OS) were identified. Results: The 5-year DFS and OS rates were significantly lower in age<35 than in $age{\geq}35$ patients. In the Luminal B, HER2-positive, Triple-negative group, the 5-year recurrence risk was higher in age<35 than in $age{\geq}35$ patients, and age<35 patients' 5-year death risk was higher only in Luminal B, Triple-negative group. Regardless of whether lymph node involved, age<35 patients had a bad prognosis in both DFS and OS. Conclusions: Compared with premenopausal age ${\geq}35$ breast cancer, age<35 patients had a worse outcome.

• 비파괴검사학회지
• /
• 제20권5호
• /
• pp.373-380
• /
• 2000

파괴적인 방법으로 재료나 설비의 기계적 성질을 평가하기 위해서는 많은 경비와 시간이 소요되므로 비파괴적인 방법을 이용한 재료의 기계적 성질 평가가 주목을 받고 있다. 본 논문에서는 초음파 특성을 이용하여 열처리 온도와 조건에 따른 기계적 성질 변화를 평가하였다. 초음파의 감쇠계수는 열처리 온도가 높을수록 결정립의 크기가 커지므로 증가하였다. 초음파의 감쇠계수는 열처리(담금질, 템퍼링, 용접후열처리)가 진행됨에 따라 감소하였다. 초음파 속도는 담금질과 템퍼링/PWHT한 시편에서 40 m/s의 차이를 보이고 있었다. 감쇠계수와 인성과의 상관성은 매우 좋으며 이러한 상관관계는 단조한 압력용기의 비파괴 평가에 이용할 수 있으며, 더욱이 현장 적용에 효율적으로 응용할 수 있을 것이다.

• 열처리공학회지
• /
• 제21권1호
• /
• pp.10-19
• /
• 2008

To investigate the effect of ultrasonic nano-crystalline surface modification (UNSM) treatment on rolling contact fatigue and residual stress properties of bearing steels, this paper carried out a rolling contact fatigue test, measured residual stress and retained austenite, performed a wear test, observed microstructure, measured micro hardness, and analyzed surface topology. After the UNSM treatment, it was found that the surface became minute by over $100{\mu}m$. The micro surface hardness was changed from Hv730~740 of base material to Hv850~880 with about 20% improvement, and hardening depth was about 1.3 mm. The compressive residual stress was measured as high as -700~-900 MPa, and the quantity of retained austenite was reduced to 27% from 34%. The polymet RCF-6 ball type rolling contact fatigue test showed over 4 times longer fatigue lifetime after the UNSM treatment under 551 kgf load and 8,000 rpm. In addition, this paper observed the samples, which went through the rolling contact fatigue test, with OM and SEM, and it was found that the samples had a spalling phenomenon (the race way is decentralized) after the UNSM treatment. However, before the treatment, the samples had excessive spalling and complete exploration. Comparison of the test samples before and after the UNSM treatment showed a big difference in the fatigue lifetime, which seems to result from the complicated effects of micro particles, compressive residual stress, retained austenite, and surface topology.

• 유기물자원화
• /
• 제19권3호
• /
• pp.35-43
• /
• 2011

본 연구에서는 하수슬러지를 전처리 과정을 통해 가용화한 후 혐기성 생물학적 분해를 실시하였다. 산 또는 알칼리 조건과 초음파처리를 복합적으로 적용하여 전처리 후 슬러지의 가용화율을 비교하였으며 알칼리 조건에서 초음파처리를 병행하였을 때 최대 가용화율을 얻을 수 있었다. 가용화된 슬러지의 생물학적 유용성은 복합전처리를 실시한 경우 빠른 생물학적 분해와 더불어 총 가스 발생량은 10배 이상 증가하였으며 가용화된 슬러지에서 바이오가스 생산 가능성을 확인 하였다. 전처리를 실시한 슬러지를 이용하여 생물학적 분해를 실시하였을 때 약 50%정도 높은 수소생성율의 지표가 되는 B/A비를 확인할 수 있었으나 수소생성에 저해가 되는 lactic acid와 propionic acid가 검출되는 것으로 보아 후속연구가 필요할 것으로 판단되었다.

• 한국분무공학회지
• /
• 제6권4호
• /
• pp.22-30
• /
• 2001

The objective of this study is to develop the new equations for the calculation of higher heating values(HHVs) of reformed diesel fuels by ultrasonic treatment. Therefore, higher heating values of reformed diesel fuels by ultrasonic treatment are determined experimentally and calculated from their viscosity and surface tension measurements. The HHVs of the fuels are supposed to be a function of viscosity(Pa s) and surface tension(N/cm). The equations developed for the samples represent the correlation obtained by means of regression analysis. The HHVs calculated by developing new equations using viscosities showes the differences from the measured values ranging from -0.66 to 1.19 % and the correlation coefficient was -0.9411. The HHVs calculated by developing new equations using surface tensions showed the differences from the measured values ranging from -0.70 to 1.51 % and the correlation coefficient was 0.9999. The viscosity and the surface tension are characteristic properties of ultrasonic reformed diesel fuels for developing new formulae.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2003년도 Challenges and Achievements in Environmental Health
• /
• pp.123-127
• /
• 2003

This experiment was performed to investigate the characteristics of sonolytic reaction as the basic data for development of the ultrasonic AOP(Advanced Oxidation Process) process from which the refractory organic compounds in aqueous solution which are not readily removed by the existing conventional wastewater treatment processes can be destructed and removed. Trichloroethylene (TCE), benzene, and 2,4-dichlorophenol(DCP) were used as the samples, and their destruction efficiency were measured in terms of experimental parameters of the initial solution concentration, initial solution pH, reaction temperature, acoustic frequencies and intensities. Results showed that the destruction efficiencies of all of the sample materials were above 80% within 120 minutes of sonolytic reaction in all reaction condition. The reaction order of these three compounds was verified as Pseudo first order. From the fore-mentioned results, it can be concluded that the refractory organic compounds could be removed by the ultrasonic irradiation with radicals, such as H$.$and OH$.$causing the high increase of pressure and temperature. Finally, it appears that the new AOP technology using ultrasonic irradiation can be applied to the treatment of refractory substances which are difficult to be decomposed by the conventional methods.